|
|||
perhaps you should read this before posting again
http://daemonforums.org/showthread.p...ghlight=newbie as for your specific problem, it's hard to help when all you say is "nothing seems to work" - do you have any logs or error messages? If the model isn't on solaris HCL , i'd say it has a high probability of not working. You need to understand here that sun aren't aiming to be the fastest operating system that runs on every piece of hardware. Sun sell sparc and x86 machines and as long as it runs on those machines, they're happy. Don't get upset at solaris ... just don't use it as a desktop!
__________________
"No, that's wrong, Cartman. But don't worry, there are no stupid answers, just stupid people." -- Mr. Garrison Forum Netiquette |
|
|||
I found this short tutorial, perhaps it may help you? http://blogs.sun.com/madhu/entry/bur...dvd_in_solaris
Don't worry about corey, he hasn't had his morning Wheaties or something.. |
|
||||
hi
Quote:
Thank you for trying to help. None of that worked for my dvdrw i have no problem as i said to write to DVD only to dvd+rw do i have that trouble also cdrw command not found i can only do cdrecord for that type of recording electric@lucid-dreamer:~$ cdrw -i /export/test.iso bash: cdrw: command not found electric@lucid-dreamer:~$ cdrecord test.iso /usr/bin/cdrecord.bin: No write mode specified. /usr/bin/cdrecord.bin: Asuming -tao mode. /usr/bin/cdrecord.bin: Future versions of cdrecord may have different drive dependent defaults. /usr/bin/cdrecord.bin: Continuing in 5 seconds... /usr/bin/cdrecord.bin: No CD/DVD-Recorder device specified. Usage: /usr/bin/cdrecord.bin [options] track1...trackn Use /usr/bin/cdrecord.bin -help to get a list of valid options. Use /usr/bin/cdrecord.bin blank=help to get a list of valid blanking options. Use /usr/bin/cdrecord.bin dev=b,t,l driveropts=help -checkdrive to get a list of drive specific options. Use /usr/bin/cdrecord.bin dev=help to get a list of possible SCSI transport specifiers. i am sorry for acting like a child and acting up in this forum.i myself have really bad days these past few weeks. or maybe im just a grouch at all times. i meant no offence to anyone here.and i harldy doubt every one who joined read every thing in the agreement form. i know i read the entire agreement form on that stupid magic jack phone that lets you call anywhere in the world for only 20.00 a year.read it if you decide to get this thing.read it before you install its software, i read the agreement and declined it.and those idiots still charged me 54.00 during my 30 day trial that i did not actually start or agreee to. i prefer to just use vonage and pay each month. Anyways i am a slow learner and use to be dislexis a s a child and am often scolded for my spelling or the way i type .i am trying hard to correct that.
__________________
The journey is better then the destination Last edited by whispersGhost; 2nd June 2008 at 12:23 PM. |
|
|||
Assuming your drive still shows up as 3,1,0 in -scanbus, try the following.. I hope it works.
$ cdrecord -v dev=3,1,0 driver=mmc_dvdplusrw -format $ cdrecord -v dev=3,1,0 driver=mmc_dvdplusrw test.iso You may also wish to try the: -sao/-dao arguments.. DVD+RW format needs to be formatted. I hope this helps |
|
|||
Looking over your old post, the error message is quite easy to read...
Quote:
As said, try adding -sao or -dao the the above commands.. or -packet if they fail. |
|
||||
hi
hi
When you say do you all a big favor and do search on google.does that mean you guys just dont want to be bothered and a forum is not a place to ask questions?i am not sure i remember seeing you on the other forum. nevertheless you tried to help me. Oh that is your signature lol Sorry i must admit i have used google for over a week trying to solve this problem before posting again, So please dont think i dont bother to look for the answers myself before i post here. And by the way when ever i am stumped on a problem i will always pick someones brains if i can not find the answers on google. its up to them if they want to be bothered or not by someone as dumb and blind as myself. i appreciate you assistance. i had not been sleeping well either and just changed from gourmet coffee to kirkland this week Yuk!@! because i bought new router and adapter lo. i will look into all this again once im fully awake. i do recall doing the -scanbus once before and got no where ,but i will try your sugestions soon as i feel better. by the way does anyone know that there is no copy and paste from this forum posts? i seem to be having some trouble copying a line of text from the post but not from the quote.
__________________
The journey is better then the destination Last edited by whispersGhost; 2nd June 2008 at 09:20 PM. Reason: x |
|
|||
Sorry, It's my new signature.. it wasn't directed toward you.. my apologies..
|
|
||||
hi
hi
smiles read again above i do feel kind of strange talking to a guy with the last few letters of his last name has 666 since my mom is a nun lol
__________________
The journey is better then the destination Last edited by whispersGhost; 2nd June 2008 at 09:24 PM. |
|
|||
Quote:
Was the command successful? |
|
||||
hi
hi
Actually no but then again i probally did not read it all correctly. i had done this once before long ago with -scanbus and did see my drives but this time the command -scanbus did not do anything unless i was supose to type something else besides that. i will check my notes and find what i did last time with -scanbus to and see my drives and get back to you.
__________________
The journey is better then the destination |
|
||||
hi
hi
Ok here is what i have so far just to let you know also i am not sure where to put the -sao or -dao that you mentioned. Is it before -v or after it or replace -v with it i am not clear really on any of it LITE-ON DVDRW LH-20A1P code: cdrecord -v test-file $ cdrecord -v test-file /usr/bin/cdrecord.bin: No write mode specified. /usr/bin/cdrecord.bin: Asuming -tao mode. /usr/bin/cdrecord.bin: Future versions of cdrecord may have different drive dependent defaults. /usr/bin/cdrecord.bin: Continuing in 5 seconds... /usr/bin/cdrecord.bin: No CD/DVD-Recorder device specified. Usage: /usr/bin/cdrecord.bin [options] track1...trackn Use /usr/bin/cdrecord.bin -help to get a list of valid options. Use /usr/bin/cdrecord.bin blank=help to get a list of valid blanking options. Use /usr/bin/cdrecord.bin dev=b,t,l driveropts=help -checkdrive to get a list of drive specific options. Use /usr/bin/cdrecord.bin dev=help to get a list of possible SCSI transport specifiers. code: cdrecord -scanbus Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling Warning: Using USCSI interface. Using libscg version 'schily-0.8'. scsibus3: 3,0,0 300) * 3,1,0 301) 'LITE-ON ' 'DVDRW LH-20A1P ' 'KL0A' Removable CD-ROM 3,2,0 302) * 3,3,0 303) * 3,4,0 304) * 3,5,0 305) * 3,6,0 306) * 3,7,0 307) * code: $ cdrecord dev=3,1,0 -v test-file /usr/bin/cdrecord.bin: No write mode specified. /usr/bin/cdrecord.bin: Asuming -tao mode. /usr/bin/cdrecord.bin: Future versions of cdrecord may have different drive dependent defaults. /usr/bin/cdrecord.bin: Continuing in 5 seconds... Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '3,1,0' scsibus: 3 target: 1 lun: 0 Warning: Using USCSI interface. Using libscg version 'schily-0.8'. SCSI buffer size: 57344 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'DVDRW LH-20A1P ' Revision : 'KL0A' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: DVD+RW Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW (current) Profile: DVD-R/DL layer jump recording Profile: DVD-R/DL sequential recording Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw). Driver flags : DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: PACKET SAO Drive buf size : 1068032 = 1043 KB FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord.bin: Drive does not support TAO recording. /usr/bin/cdrecord.bin: Illegal write mode for this drive.
__________________
The journey is better then the destination |
|
|||
It doesn't matter, the arguments are parsed in any order...
$ cdrecord dev=3,1,0 -v -format -sao Replace -sao with -packet if it fails.. but first, paste the output here in [code][/code] tags. |
|
||||
hi
hi
do i need a disk in the drive? lol kidding i do not remember telling you this but i do not have trouble with a regular dvd disk only with DVD+rw i have this trouble Also if its not mounted how can any of this work This is driving me crazy lol This never happened in BSD ~$ cdrecord dev=3,1,0 -v -format -sao Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '3,1,0' scsibus: 3 target: 1 lun: 0 Warning: Using USCSI interface. /usr/bin/cdrecord.bin: No such file or directory. Cannot open '/dev/rdsk/c3t1d0s2'. Cannot open SCSI driver. /usr/bin/cdrecord.bin: For possible targets try 'cdrecord -scanbus'. /usr/bin/cdrecord.bin: For possible transport specifiers try 'cdrecord dev=help'. electric@lucid-dreamer:~$ cdrecord dev=3,1,0 -v -format -packet Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '3,1,0' scsibus: 3 target: 1 lun: 0 Warning: Using USCSI interface. /usr/bin/cdrecord.bin: No such file or directory. Cannot open '/dev/rdsk/c3t1d0s2'. Cannot open SCSI driver.
__________________
The journey is better then the destination |
|
|||
To clarify, the -sao argument enables "Session At Once" recording.. vs the default of "Trace at once" which is not supported by your drive, (At least, not with DVD+RW media..)
-v enables extra verbosity(prints more text..) by the program which helps identify the cause of the issue.. which in your case is easy, your drive doesn't support TAO mode. -packet apparently enables an experimental form of writing, I don't know more about this unfortunately, but it's a mode supported by your drive. The order of arguments is rather defined, typically then can be in any way you like.. but typically the must go before the filename argument. |
|
|||
Uhh, I'm not sure why it's bailing out like that... just an idea, but have you tried running as root?
A device can only be mounted if it has a file system... I'm assuming you are "burning" a image to the DVD, which contains the file system right? cdrecord interfaces with the block/character device of the drive.. I honestly don't know what's wrong with your setup, we could be lost in translation or something. |
|
|||
Honestly, the output of -scanbus and the message you show are contradicting each other... are you even running them on the same system? and yes.. the disk must be in the drive.
|
|
||||
hi
Its ok i know you meant well and tried
i made so many mistakes since installing Solaris #1 i had to turn Raid off to get two of my Sata Drives recognized #2 i had to format my -Drives so that i can write to them and made them solaris2 file system slices Unfortunatly i am not able to mount them on FreeBSD. i have over a terra between the drives that i would have to move. If i was to make a file system other then NTFS or Fat32 for FreeBSD to be able to mount for read and write i would like to know one i can use so i can use on either OS BSD or Solaris.as i dont want them to be able to be accessed from XP unless with UFS Explorer. So in other words if i want to write to DVD+RW i would l have to sign into either XP or BSD and i can not mount Solaris2 file system on either not even wit UFS explorer
__________________
The journey is better then the destination |
|
||||
Quote:
~$ cdrecord -scanbus Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling Warning: Using USCSI interface. Using libscg version 'schily-0.8'. scsibus7: 7,0,0 700) * 7,1,0 701) 'LITE-ON ' 'DVDRW LH-20A1P ' 'KL0A' Removable CD-ROM 7,2,0 702) * 7,3,0 703) * 7,4,0 704) * 7,5,0 705) * 7,6,0 706) * 7,7,0 707) *
__________________
The journey is better then the destination |
|
||||
Quote:
it was an older ouput i had in notes so i replaced 3 with a 7 i think something happened this time The light was blinking this time like crazy on my drive $ cdrecord dev=7,1,0 -v -format -sao Cdrecord-ProDVD-Clone 2.01.01a10 (i386-pc-solaris2.11) Copyright (C) 1995-2006 J�rg Schilling TOC Type: 1 = CD-ROM scsidev: '7,1,0' scsibus: 7 target: 1 lun: 0 Warning: Using USCSI interface. Using libscg version 'schily-0.8'. SCSI buffer size: 57344 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'DVDRW LH-20A1P ' Revision : 'KL0A' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: DVD+RW Profile: DVD+R/DL Profile: DVD+R Profile: DVD+RW (current) Profile: DVD-R/DL layer jump recording Profile: DVD-R/DL sequential recording Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-ROM Profile: CD-RW Profile: CD-R Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw). Driver flags : DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: PACKET SAO Drive buf size : 1068032 = 1043 KB Current Secsize: 2048 Trying to clear drive status. Forcespeed is OFF. Format was not needed. Starting to write CD/DVD at speed 4 in real FORMAT mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. /usr/bin/cdrecord.bin: Medium is already formatted. /usr/bin/cdrecord.bin: Cannot format medium.
__________________
The journey is better then the destination Last edited by whispersGhost; 2nd June 2008 at 11:20 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FreeBSD howto: burning and ripping cd's | graudeejs | Guides | 9 | 31st December 2008 06:39 AM |
shell: how to take part of the line... | graudeejs | Programming | 8 | 6th September 2008 11:13 PM |
CD Burning Software | ninjatux | FreeBSD Ports and Packages | 7 | 17th July 2008 08:37 AM |
trouble burning to dvdrw | whispersGhost | Solaris | 2 | 21st May 2008 02:05 PM |
HOWTO: BURNCD like DVD and CD CLI burning | vermaden | Guides | 0 | 5th May 2008 10:45 AM |