|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|
|||
openBSD 5.1 and OSPFD
Hi,
I'm actually having a problem with ospfd on openBSD 5.1 that I do not understand. I already work with ospfd on openBSD 4.7 and 4.9 and I'm wondering if someone else had this problem before. I have 2 firewalls connected to each other. FW1 vr0 --------- FW2 vr0 Both routers are communicating together via ospf and exchanging informations. The only problem is that routing tables on each routers are not updated... here is the information of each firewall. FW1 : vr0 : 10.10.10.1/24 vr2 : 192.168.0.1/24 ospfd.conf Code:
#macros md1="password1" md2="password2" ext_if="vr0" int_if="vr2" router-id 192.168.0.1 # areas area 0.0.0.0 { auth-type crypt auth-md 1 $md1 auth-md 2 $md2 auth-md-keyid 1 #local link interface $ext_if interface $int_if } Code:
ID Pri State DeadTime Address Iface Uptime 192.168.1.1 1 FULL/DR 00:00:37 10.10.10.2 vr0 00:00:18 Code:
Destination Nexthop Path Type Type Cost Uptime 10.10.10.0/24 10.10.10.1 Intra-Area Network 10 00:00:18 Code:
flags: * = valid, O = OSPF, C = Connected, S = Static Flags Prio Destination Nexthop *C 4 10.10.10.0/24 link#1 *O 32 10.10.10.0/24 10.10.10.1 *C 4 10.10.100.0/24 link#7 *C 0 127.0.0.0/8 link#0 *S 8 127.0.0.0/8 127.0.0.1 * 4 127.0.0.1/32 127.0.0.1 C 4 192.168.0.0/24 link#3 *S 8 224.0.0.0/4 127.0.0.1 FW2 : vr0 : 10.10.10.2/24 vr2 : 192.168.1.1 ospfd.conf Code:
#macros md1="password1" md2="password2" ext_if="vr0" int_if="vr2" router-id 192.168.1.1 # areas area 0.0.0.0 { auth-type crypt auth-md 1 $md1 auth-md 2 $md2 auth-md-keyid 1 #local link interface $ext_if interface $int_if } Code:
ID Pri State DeadTime Address Iface Uptime 192.168.0.1 1 FULL/BCKUP 00:00:31 10.10.10.1 vr0 00:03:29 Code:
Destination Nexthop Path Type Type Cost Uptime 10.10.10.0/24 10.10.10.2 Intra-Area Network 10 00:03:58 Code:
flags: * = valid, O = OSPF, C = Connected, S = Static Flags Prio Destination Nexthop *C 4 10.10.10.0/24 link#1 *O 32 10.10.10.0/24 10.10.10.2 *C 4 10.10.100.0/24 link#7 *C 0 127.0.0.0/8 link#0 *S 8 127.0.0.0/8 127.0.0.1 * 4 127.0.0.1/32 127.0.0.1 C 4 192.168.1.0/24 link#3 *S 8 224.0.0.0/4 127.0.0.1 |
|
|||
Thanks for your reply, I will post the informations you asked and I will also send an email to misc@.
I will also keep you update on the problem if I get anything new on how to fix the problem. |
|
|