DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 21st August 2013
Lexus45 Lexus45 is offline
Port Guard
 
Join Date: May 2010
Location: Kurgan, Russia
Posts: 39
Default lshw analog

Hello all.
Is there any 'lshw' analog for OpenBSD ?
I'd like to write down the hardware of my OpenBSD box.

I use 'dmesg' now, but I'm not sure if it shows the mainboard model (I know, it's Intel, and I see 'Intel' in the dmesg output, but I want to know the exact model). Are there any variants?

Code:
rgets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b
syncing disks... 
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU D425 @ 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
real mem  = 2128760832 (2030MB)
avail mem = 2083000320 (1986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries)
bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011
bios0: Intel Corporation D425KT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt0: no apic found for irq 24
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000

inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 8 int 16, address 38:60:77:a3:28:24
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST500DM002-1BD142>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/2.50 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/2.50 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b
syncing disks... 
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU D425 @ 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
real mem  = 2128760832 (2030MB)
avail mem = 2083000320 (1986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries)
bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011
bios0: Intel Corporation D425KT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz

acpiprt0 at acpi0: bus 5 (P32_)
acpiprt0: no apic found for irq 24
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 8 int 16, address 38:60:77:a3:28:24
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST500DM002-1BD142>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6

ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/2.50 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/2.50 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b
syncing disks... 
OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU D425 @ 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
real mem  = 2128760832 (2030MB)

avail mem = 2083000320 (1986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries)
bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011
bios0: Intel Corporation D425KT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt0: no apic found for irq 24
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 8 int 16, address 38:60:77:a3:28:24
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18
pci3 at ppb2 bus 3

ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST500DM002-1BD142>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/2.50 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0

uhidev1 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/2.50 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b
Reply With Quote
  #2   (View Single Post)  
Old 21st August 2013
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 3,318
Default

Quote:
Originally Posted by Lexus45 View Post
I want to know the exact model).
I believe what you want is highlighted below in your dmesg(8) output:
Quote:
Code:
...
bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries)
bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011
bios0: Intel Corporation D425KT
...
Googling for "intel d425kt" reveals the following:

http://www.intel.com/content/www/us/...rd-d425kt.html

The BIOS is "MWPNT10N.86A" dated May 2011 which leads to the following found through Google:

https://downloadcenter.intel.com/Det...&DwnldID=19519

Some of the same information can be found with the command:

$ sysctl hw

...but you will find lots more system information simply by issuing:

$ sysctl

Studying the sysctl(8) manpage may also be in order. What specifically are you looking for?

Last edited by ocicat; 21st August 2013 at 09:15 AM. Reason: clarity
Reply With Quote
  #3   (View Single Post)  
Old 21st August 2013
Lexus45 Lexus45 is offline
Port Guard
 
Join Date: May 2010
Location: Kurgan, Russia
Posts: 39
Default

I admire your complete answers, ocicat, and in those cases when I can help anybody, I try to answer in the same manner, with links and quotes.

Thank you!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:29 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick