DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
Old 7th June 2013
comet--berkeley comet--berkeley is offline
Real Name: Richard
Package Pilot
 
Join Date: Apr 2009
Location: California
Posts: 163
Thumbs up

Dell Latitude D630 running 5.3-stable amd64
Using fvwm
Wireless works well after loading firmware by using a wired ethernet connection.

dmesg:
Quote:
OpenBSD 5.3-stable (GENERIC.MP) #3: Mon Jun 3 09:44:56 PDT 2013
root@vixen.test:/usr/src/sys/arch/am...ile/GENERIC.MP
real mem = 2136322048 (2037MB)
avail mem = 2057019392 (1961MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf68e0 (62 entries)
bios0: vendor Dell Inc. version "A07" date 01/30/2008
bios0: Dell Inc. Latitude D630
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT
acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S4) RP03(S3) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1197.23 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF ,PERF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1197.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF ,PERF
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus 9 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL MT2648" serial 5 type LION oem "Samsung SDI"
acpibat1 at acpi0: BAT1 not present
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID_
acpivideo2 at acpi0: VID2
cpu0: Enhanced SpeedStep 1197 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9205X, Conexant/0x2c06, using Sigmatel STAC9205X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi
pci2 at ppb1 bus 12
bwi0 at pci2 dev 0 function 0 "Broadcom BCM4311" rev 0x01: apic 2 int 17, address 00:1f:3a:38:34:8b
ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: msi
pci3 at ppb2 bus 9
bge0 at pci3 dev 0 function 0 "Broadcom BCM5755M" rev 0x02, BCM5755 A2 (0xa002): apic 2 int 17, address 00:1c:23:41:52:64
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 3
cbb0 at pci4 dev 1 function 0 "O2 Micro OZ711EZ1 CardBus" rev 0x21: apic 2 int 19
"O2 Micro Firewire" rev 0x02 at pci4 dev 1 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT10N, A100> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 17 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST980813ASG>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub7 at uhub6 port 1 "O2 Micro OZ776 Hub" rev 1.10/1.10 addr 2
ugen0 at uhub7 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (40910fc1df0efe1f.a) swap on wd0b dump on wd0b
sysctl hw.sensors:
Quote:
hw.sensors.cpu0.temp0=46.00 degC
hw.sensors.cpu1.temp0=46.00 degC
hw.sensors.acpitz0.temp0=48.50 degC (zone temperature)
hw.sensors.acpiac0.indicator0=Off (power supply)
hw.sensors.acpibat0.volt0=11.10 VDC (voltage)
hw.sensors.acpibat0.volt1=11.08 VDC (current voltage)
hw.sensors.acpibat0.current0=1.67 A (rate)
hw.sensors.acpibat0.amphour0=4.31 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.44 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.13 Ah (low capacity)
hw.sensors.acpibat0.amphour3=3.06 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=1 (battery discharging), OK
hw.sensors.acpidock0.indicator0=Off (not docked)
Reply With Quote
Old 9th June 2013
vanGrimoire's Avatar
vanGrimoire vanGrimoire is offline
Port Guard
 
Join Date: Nov 2012
Posts: 43
Default

I use blackbox and get Pitkon themes from DeviantArt. I can't figure out how you can theme fvwm?

not that the default isn't excellent on it's own. I like the default for switching screens, and the pager is nice, I can change the border of apps, and set the background with bgsetbg.

In blackbox I use the skins from Pitkon's older work, the backgrounds from his newest work, and throw out anything in between that relies on windows.

http://pitkon.deviantart.com/

Last edited by vanGrimoire; 10th June 2013 at 12:50 AM.
Reply With Quote
Old 26th June 2013
kimotori kimotori is offline
Port Guard
 
Join Date: Jun 2013
Posts: 17
Default

I have a laptop i3 ASUS k54L with OpenBSD 5.3 GENERIC

dmesg
Quote:
OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013
deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
cpu0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz ("GenuineIntel" 686-class) 2.10 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWA IT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,S SE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,LAHF,PERF,I TSC
real mem = 3128532992 (2983MB)
avail mem = 3066421248 (2924MB)
User Kernel Config
UKC> disable acpi
482 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/03/10, SMBIOS rev. 2.6 @ 0xeb940 (75 entries)
bios0: vendor American Megatrends Inc. version "K54L.208" date 09/26/2011
bios0: ASUSTeK Computer Inc. K54L
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 5 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xf200
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 17
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 38:59:f9:61:86:ac
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 19
pci3 at ppb2 bus 3
"ASMedia ASM1042 xHCI" rev 0x00 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 17
pci4 at ppb3 bus 4
alc0 at pci4 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi, address 14:da:e9:cf:43:89
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500325AS, 0002> SCSI3 0/direct fixed naa.5000c5003da95eb6
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 1 lun 0: <Slimtype, DVD A DS8A5SH, XAA2> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 2 configuration 1 interface 0 "Azurewave USB 2.0 UVC VGA WebCam" rev 2.00/11.30 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (690cbc4d7bf0b96d.a) swap on sd0b dump on sd0b
at the first boot
I have a problem with acpi and USB3 no work
boot> -c
disable acpi
quit
and continue boot

Last edited by kimotori; 28th June 2013 at 12:51 PM.
Reply With Quote
Old 26th June 2013
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 3,318
Default

Quote:
Originally Posted by kimotori View Post
I have a problem with acpi and USB3 no work
Welcome!

Can you provide more information? Without more information, we can only empathize. Posting the output of dmesg(8) would be helpful.

You may also want to download & install a recent snapshot of -current as -current has had four additional months of development over what can be found in 5.3-release. If you do not understand the difference between -release & -current, see Section 5.1 of the project's official FAQ.

Last edited by ocicat; 27th June 2013 at 10:13 AM.
Reply With Quote
Old 28th June 2013
kimotori kimotori is offline
Port Guard
 
Join Date: Jun 2013
Posts: 17
Default

Quote:
Originally Posted by ocicat View Post
Welcome!

Can you provide more information? ......
Tnx!
And sorry for the delay
is there a way to automate the "disable acpi" in order not to repeat the procedure?

Right from the 5.1, 5.2, 5.3 I have the same problem. i hope 5.4
Reply With Quote
Old 28th June 2013
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 3,318
Default

Quote:
Originally Posted by kimotori View Post
is there a way to automate the "disable acpi" in order not to repeat the procedure?
See sections 5.8 & 5.9 of the FAQ. An example is provided there.
Reply With Quote
Old 28th June 2013
kimotori kimotori is offline
Port Guard
 
Join Date: Jun 2013
Posts: 17
Default

Ooooohhh tnx

Quote:
# config -e -u -o bsd.new /bsd
Processing history...
482 acpi0 disabled
OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013
deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
Enter 'help' for information
ukc> disable acpi
482 acpi0 already disabled
ukc> quit
Saving modified kernel.
# mv bsd bsd.original
# mv bsd.new bsd
# reboot
Perfect. Thank you very much ocicat!
Reply With Quote
Old 30th June 2013
katokan katokan is offline
New User
 
Join Date: Jun 2013
Posts: 3
Default

Macbook 2,1 core2duo with 5.3 amd64
Added an Asus N13 wireless adapter

The GMA 950 graphics card has some errors (check bottom of dmesg) that keep machdep.lidsuspend and xlock from working, but everything else is ok. Does anyone have suggestions for how to fix the graphics card issues?


Quote:
OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 1040154624 (991MB)
avail mem = 990027776 (944MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (37 entries)
bios0: vendor Apple Inc. version "MB21.88Z.00A5.B07.0706270922" date 06/27/07
bios0: Apple Inc. MacBook2,1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
acpi0: wakeup devices ADP1(S3) LID0(S3) PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) EC__(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz, 2161.54 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF ,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz, 2161.25 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF ,PERF
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (PCIB)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "15253732082930497" type 15253732284385612 oem "15253732284387396"
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 2161 MHz: speeds: 2167, 2000, 1833, 1667, 1500, 1333, 1000 MHz
memory map conflict 0x3ef00000/0x100000
memory map conflict 0x3f000000/0x1000000
memory map conflict 0xf00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xfffb0000/0x30000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency, rev 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC rev. A3 (0x2): apic 1 int 16
msk0 at mskc0 port A: address 00:19:e3:3c:d9:5d
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 1 int 17
athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 4, address 00:1b:63:c1:97:4d
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
"AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <FUJITSU MHW2120BH>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
iic0: addr 0x48 00=32 01=00 02=4b 03=50 words 00=3280 01=00ff 02=4b00 03=5000 04=ffff 05=ffff 06=ffff 07=ffff
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
run0 at uhub0 port 3 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT3071 (rev 0x021C), RF RT3022 (MIMO 2T2R), address 14:da:e9:b0:b8:f1
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Apple Computer Bluetooth" rev 2.00/0.0c addr 3
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
ums1 at uhidev1 reportid 5
ums1: mouse has no X report
uhidev2 at uhub1 port 2 configuration 1 interface 2 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev2: iclass 3/0
uhid0 at uhidev2: input=1, output=0, feature=0
uhidev3 at uhub3 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 2
uhidev3: iclass 3/0, 38 report ids
uhid1 at uhidev3 reportid 36: input=4, output=0, feature=0
uhid2 at uhidev3 reportid 37: input=4, output=0, feature=0
uhid3 at uhidev3 reportid 38: input=4, output=0, feature=0
uhidev4 at uhub4 port 1 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub4 port 1 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2
uhidev5: iclass 3/1
ums2 at uhidev5: 5 buttons
wsmouse1 at ums2 mux 0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd0: 112415MB, 512 bytes/sector, 230226987 sectors
root on sd0a (67b57f3b5452eb16.a) swap on sd0b dump on sd0b
uvideo0 detached
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Micron Built-in iSight" rev 2.00/1.84 addr 3
video0 at uvideo0
render error detected, EIR: 10<PTEERR>
PGTBL_ER: 0x00000102
render error detected, EIR: 10<PTEERR>
PGTBL_ER: 0x00000102
no reset function for chipset.
no reset function for chipset.
Reply With Quote
Old 23rd November 2013
joekiser joekiser is offline
The World is Yours.
 
Join Date: May 2008
Posts: 51
Default

HP Elitebook 8460p
- Hard Disk was pulled from my main machine, a Lenovo X200
- No changes were made to the config
- Video detected, sound works, 1080p video plays through VLC, brightness / volume keys work
- Could not properly resume from suspend. Lost the keyboard (everything else still works including WiFi). Did not attempt SSH troubleshooting.


Quote:
OpenBSD 5.4-stable (GENERIC) #0: Thu Nov 21 06:36:34 EST 2013
joekiser@X200.VALHALLA:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error 95<clock_battery,memory_size,invalid_time>
real mem = 4184596480 (3990MB)
avail mem = 4065513472 (3877MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbcdb6000 (27 entries)
bios0: vendor Hewlett-Packard version "68SCF Ver. F.42" date 07/15/2013
bios0: Hewlett-Packard HP EliteBook 8460p
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SSDT SLIC SSDT SSDT ASF!
acpi0: wakeup devices LANC(S0) EHC1(S3) EHC2(S3) PCIB(S5) RP02(S4) ECF0(S4) RP03(S4) RP04(S5) WNIC(S5) RP06(S0) NIC_(S0) RP07(S4) RP08(S4) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2494.74 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4 .1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE ,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus -1 (PCIB)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 35 (RP03)
acpiprt5 at acpi0: bus 36 (RP04)
acpiprt6 at acpi0: bus 37 (RP08)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0acpitz1: GFXZ: failed to read _TMP
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
acpitz5 at acpi0acpitz5: PCHZ: failed to read _TMP
acpitz6 at acpi0acpitz6: DM1Z: failed to read _TMP
acpitz7 at acpi0acpitz7: DM2Z: failed to read _TMP
acpibat0 at acpi0: BAT0 model "Primary" serial 54710 2012/08/26 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1600x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 0 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address e4:11:5b:32:2c:c0
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: IDT 92HD81B1X, AT&T/Lucent/0x1040, Intel/0x2805, using IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 35
"JMicron FireWire" rev 0x30 at pci3 dev 0 function 0 not configured
"JMicron SD/MMC" rev 0x30 at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 "JMicron SD Host Controller" rev 0x30: apic 0 int 18
sdmmc0 at sdhc0
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 36
iwn0 at pci4 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 10:0b:a9:44:7f:b4
ppb4 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 37
"NEC xHCI" rev 0x04 at pci5 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD7500BPKT-75PK4T0>
wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=0, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:1:0: device timeout, c_bcount=36, c_skip=0, status=0x58<DRDY,DSC,DRQ>, ireason=0x1
atapiscsi0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 19 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "Validity Sensors VFS471 Fingerprint Reader" rev 1.10/0.86 addr 3
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub3 port 6 "Broadcom Corp HP Integrated Module" rev 2.00/3.06 addr 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd0: 707204MB, 512 bytes/sector, 1448354667 sectors
softraid0: volume sd0 is roaming, it used to be sd3, updating metadata
softraid0: roaming device sd0a -> wd0a
root on sd0a (a8173fe9a34b3257.a) swap on sd0b dump on sd0b

Last edited by joekiser; 23rd November 2013 at 03:20 AM.
Reply With Quote
Old 23rd November 2013
joekiser joekiser is offline
The World is Yours.
 
Join Date: May 2008
Posts: 51
Default

Same HDD back in my X200:

Quote:
OpenBSD 5.4-stable (GENERIC) #0: Thu Nov 21 06:36:34 EST 2013
joekiser@X200.VALHALLA:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 8461684736 (8069MB)
avail mem = 8228745216 (7847MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET65WW (3.15 )" date 08/24/2010
bios0: LENOVO 7454CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 798.16 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NX E,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 266MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4542" serial 168 type LION oem "Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 798 MHz: speeds: 2401, 2400, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:1f:16:0e:8e:62
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:5d:c2:90:0a
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct fixed naa.50014ee6ad9174af
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Lenovo product 0x480c" rev 2.00/31.34 addr 2
video0 at uvideo0
umass0 at uhub1 port 6 configuration 1 interface 0 "RICOH USB2.0-FLASH Media" rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
probe(umass0:1:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Aborted Command
ASC/ASCQ: I/O Process Terminated
sd1 at scsibus1 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct removable serial.05ca1880R5U880-00003
ugen0 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.52 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 707204MB, 512 bytes/sector, 1448354667 sectors
softraid0: volume sd2 is roaming, it used to be sd0, updating metadata
softraid0: roaming device wd0a -> sd0a
root on sd2a (a8173fe9a34b3257.a) swap on sd2b dump on sd2b
Reply With Quote
Old 29th November 2013
joekiser joekiser is offline
The World is Yours.
 
Join Date: May 2008
Posts: 51
Default

What's different? I swapped a new motherboard into my X200. This is from an X201, a Core i5.

I immediately noticed a more responsive system, and I can now run 1080 videos fullscreen with no stutter. Not sure if it is the improved GPU or the AES-NI instruction set.

Quote:
OpenBSD 5.4-stable (GENERIC) #0: Thu Nov 21 06:36:34 EST 2013
joekiser@X200.VALHALLA:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 8357658624 (7970MB)
avail mem = 8127488000 (7750MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET66WW (1.36 )" date 05/31/2011
bios0: LENOVO 3249CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.46 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SS E4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpicpu0 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4542" serial 168 type LION oem "Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2400, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
"Intel 3400 KT" rev 0x06 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address 00:26:2d:f7:0d:0e
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: no supported codecs
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci1 at ppb0 bus 13
ppb1 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb2 bus 2
iwn0 at pci3 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x35: msi, MIMO 3T3R, MoW, address 00:24:d7:05:01:e4
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci4 at ppb3 bus 14
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct fixed naa.50014ee6ad9174af
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-8500 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
pci5 at mainbus0 bus 255
pchb1 at pci5 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci5 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci5 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci5 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci5 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci5 dev 2 function 3 "Intel Reserved" rev 0x02
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Lenovo product 0x480c" rev 2.00/31.34 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd1 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 707204MB, 512 bytes/sector, 1448354667 sectors
softraid0: volume sd1 is roaming, it used to be sd2, updating metadata
root on sd1a (a8173fe9a34b3257.a) swap on sd1b dump on sd1b
pms0: not in sync yet, discard input (state 0)
Reply With Quote
Old 13th December 2013
hanzer's Avatar
hanzer hanzer is offline
Real Name: Adam Jensen
just passing through
 
Join Date: Oct 2013
Location: EST USA
Posts: 314
Default Dell Latitude CPi A366XT

I'm setting up OpenBSD-5.4 on an old Dell laptop this evening (dmesg). It will probably end up as a Heimdal (Kerberos V) server. (Just because I want to tinker with the tech; it's not really needed). All of the hardware seems to work with OpenBSD except the cardbus 3Com 3CCFE575BT continuously reports:
Code:
xl0: watchdog timeout
...but that discussion belongs in another thread.
Reply With Quote
Old 29th January 2014
srenfro2 srenfro2 is offline
New User
 
Join Date: Jan 2014
Posts: 1
Default Asus K53 i5 8G

This is my Asus K53 I picked up just to learn UNIX like OS's.

Code:
OpenBSD 5.4-stable (GENERIC.MP) #0: Tue Jan 28 05:21:02 CST 2014
    root@srenfro@myhome.local:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8339701760 (7953MB)
avail mem = 8109973504 (7734MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb940 (79 entries)
bios0: vendor American Megatrends Inc. version "K53E.221" date 08/10/2012
bios0: ASUSTeK Computer Inc. K53E
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC DBGP ECDT SLIC HPET MCFG SSDT SSDT ASF!
acpi0: wakeup devices PEG0(S4) PEG1(S4) PEG2(S4) PEG3(S4) B0D4(S4) P0P1(S4) HDEF(S4) GLAN(S4) EHC1(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC2(S3) USB5(S3) USB6(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.68 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.34 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.34 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2494.34 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiec0 at acpi0
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (PEG3)
acpiprt5 at acpi0: bus -1 (P0P1)
acpiprt6 at acpi0: bus 1 (RP01)
acpiprt7 at acpi0: bus 2 (RP02)
acpiprt8 at acpi0: bus -1 (RP03)
acpiprt9 at acpi0: bus 3 (RP04)
acpiprt10 at acpi0: bus -1 (RP05)
acpiprt11 at acpi0: bus 4 (RP06)
acpiprt12 at acpi0: bus -1 (RP07)
acpiprt13 at acpi0: bus -1 (RP08)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpitz0 at acpi0: critical temperature is 103 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "K53--27" serial   type LIon oem "ASUSTek"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: LCDD
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 2
"Atheros AR9485" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 3
"ASMedia ASM1042 xHCI" rev 0x00 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: msi
pci4 at ppb3 bus 4
alc0 at pci4 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi, address 10:bf:48:14:ef:4a
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54755, JE3O> SCSI3 0/direct fixed naa.5000cca640e4b512
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 2 lun 0: <Slimtype, DVD A DS8A8SH, KAA2> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 2 configuration 1 interface 0 "Azurewave USB 2.0 UVC VGA WebCam" rev 2.00/11.30 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (f0caba7e91fb0255.a) swap on sd0b dump on sd0b

Last edited by J65nko; 30th January 2014 at 07:48 PM.
Reply With Quote
Old 30th January 2014
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,125
Default

Done
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
Old 2nd February 2014
JWJones's Avatar
JWJones JWJones is offline
got root?
 
Join Date: Jan 2014
Location: Cascadia
Posts: 68
Default

Just installed on my ThinkPad T61:

Code:
OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4201316352 (4006MB)
avail mem = 4081750016 (3892MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
bios0: vendor LENOVO version "7LETD0WW (2.30 )" date 02/27/2012
bios0: LENOVO 7661AC9
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 2194.94 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz, 1995.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T5225" serial  2144 type LION oem "Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2194 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
intel_overlay_map_regs partial stub
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: msi, address 00:21:86:58:3b:a2
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: msi, MIMO 2T3R, MoW1, address 00:21:5c:19:49:5b
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: msi
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: msi
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: msi
pci5 at ppb4 bus 13
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
sdhc0 at pci6 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not configured
"Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7910A, 1.D1> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9100821AS, 3.CM> SCSI3 0/direct fixed t10.ATA_ST9100821AS_5NJ15TN6
sd0: 95396MB, 512 bytes/sector, 195371568 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (eb696816f7581c5a.a) swap on sd0b dump on sd0b
Reply With Quote
Old 3rd February 2014
chessmaster chessmaster is offline
Port Guard
 
Join Date: Feb 2012
Posts: 17
Default

Gateway 7805u FX
Intel Core 2 Duo Processor P8400 (2.26GHz, 3MB L2, 1066MHz FSB)
17″ WXGA+ Glossy LCD display at 1440×900 (Reviewed with a 1920×1200 WUXGA Panel)
Intel 5100AGN Wireless
4GB PC3-8500 DDR3 SDRAM (2GB x 2)
698.8GB Western Digital Scorpio Black hard disk drive (7200RPM)
DVD SuperMulti (+/-R double layer) drive with Labelflash


Setting up wifi was a breeze. Thanks to the man pages

Code:
OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4271595520 (4073MB)
avail mem = 4150161408 (3957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries)
bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008
bios0: Gateway P-7805u
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT
acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 3591.22 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1197.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 13 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 5 (RP05)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "SAPPAEET" serial   211 type LION oem "414e41502d504d53"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: GFX0
cpu0: Enhanced SpeedStep 3591 MHz: speeds: 2267, 2266, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:1d:72:ed:56:80
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 4
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 13
"O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured
sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
syncing disks...
OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4271595520 (4073MB)
avail mem = 4150161408 (3957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries)
bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008
bios0: Gateway P-7805u
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT
acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1197.18 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 319MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1436.41 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 13 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 5 (RP05)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "SAPPAEET" serial   211 type LION oem "414e41502d504d53"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: GFX0
cpu0: Enhanced SpeedStep 1197 MHz: speeds: 2267, 2266, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:1d:72:ed:56:80
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 4
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 13
"O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured
sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
syncing disks...
OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4271595520 (4073MB)
avail mem = 4150161408 (3957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries)
bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008
bios0: Gateway P-7805u
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT
acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 3591.21 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 1197.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 13 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 5 (RP05)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "SAPPAEET" serial   211 type LION oem "414e41502d504d53"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: GFX0
cpu0: Enhanced SpeedStep 3591 MHz: speeds: 2267, 2266, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:1d:72:ed:56:80
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 4
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 13
"O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured
sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
iwn0: error, 2, could not read firmware iwn-5000
iwn0: could not read firmware
syncing disks...
OpenBSD 5.4-stable (GENERIC) #0: Mon Feb  3 16:52:47 EST 2014
    freethinker@Lightwave.hsd1.md.comcast.net.:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4271595520 (4073MB)
avail mem = 4150194176 (3957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfcbc000 (45 entries)
bios0: vendor Phoenix Technologies LTD version "9C.17.00" date 12/16/2008
bios0: Gateway P-7805u
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG SLIC APIC BOOT SSDT
acpi0: wakeup devices P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S3) PXSX(S5) GLAN(S5) LID0(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 3591.19 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 265MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 13 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus 5 (RP05)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "SAPPAEET" serial   211 type LION oem "414e41502d504d53"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: GFX0
cpu0: Enhanced SpeedStep 3591 MHz: speeds: 2267, 2266, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x062c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 20
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, NVIDIA/0x0005, using Conexant CX20561
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2 Extreme rev. B0 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:1d:72:ed:56:80
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 4
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:21:6b:71:7d:36
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 13
"O2 Micro Firewire" rev 0x02 at pci6 dev 6 function 0 not configured
sdhc0 at pci6 dev 6 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x02: apic 2 int 22
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x01 at pci6 dev 6 function 3 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f5751cf
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct fixed naa.5000c5002f54c637
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 5 lun 0: <HL-DT-ST, DVDRAM GSA-T50F, TP01> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 3 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/93.36 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (3e7e4468d242b038.a) swap on sd0b dump on sd0b

Last edited by chessmaster; 4th February 2014 at 03:26 AM.
Reply With Quote
Old 11th May 2014
joekiser joekiser is offline
The World is Yours.
 
Join Date: May 2008
Posts: 51
Default

Thinkpad T530, 15" 1080 screen. nVidia graphics disabled in BIOS, running Intel graphics only.

Code:
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar  5 09:37:46 MST 2014
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8255631360 (7873MB)
avail mem = 8027254784 (7655MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (71 entries)
bios0: vendor LENOVO version "G4ET62WW (2.04 )" date 09/13/2012
bios0: LENOVO 2359CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.83 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.33 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.33 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2494.33 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpicpu2 at acpi0: C2, C1, PSS
acpicpu3 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 103 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "45N1001" serial  7637 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2501, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 3c:97:0e:15:5c:ff
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16
sdmmc0 at sdhc0
"Ricoh 5U832 Firewire" rev 0x04 at pci1 dev 0 function 3 not configured
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2200" rev 0xc4: msi, MIMO 2T2R, BGN, address 9c:4e:36:3c:3f:04
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct fixed naa.50014ee6ad9174af
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7740H, 1.S0> ATAPI 5/cdrom removable
sd1 at scsibus0 targ 2 lun 0: <ATA, TOSHIBA THNSNB03, AJTA> SCSI3 0/direct fixed t10.ATA_TOSHIBA_THNSNB030GMCJ_11OS101XTL2Z
sd1: 28626MB, 512 bytes/sector, 58626288 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sdmmc0: can't enable card
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 3
ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.18 addr 5
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 707204MB, 512 bytes/sector, 1448355612 sectors
root on sd2a (0943ef3730153be9.a) swap on sd2b dump on sd2b
ugen1 detached
ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4
ugen1 detached
ugen1 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4
Reply With Quote
Old 11th May 2014
e1-531g e1-531g is offline
ISO Quartermaster
 
Join Date: Mar 2014
Posts: 628
Default

Acer E1 531G B9604G50Mnks

Code:
    OpenBSD 5.5-current (GENERIC.MP) #12: Fri Mar 21 10:52:57 MDT 2014
        deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
    real mem = 4163629056 (3970MB)
    avail mem = 4044062720 (3856MB)
    mainbus0 at root
    bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6df0 (38 entries)
    bios0: vendor Acer version "V2.21" date 12/16/2013
    bios0: Acer Aspire E1-531G
    acpi0 at bios0: rev 2
    acpi0: sleep states S0 S3 S4 S5
    acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT SSDT SSDT SSDT
    acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...]
    acpitimer0 at acpi0: 3579545 Hz, 24 bits
    acpihpet0 at acpi0: 14318179 Hz
    acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
    cpu0 at mainbus0: apid 0 (boot processor)
    cpu0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.30 MHz
    cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
    cpu0: 256KB 64b/line 8-way L2 cache
    cpu0: smt 0, core 0, package 0
    mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
    cpu0: apic clock running at 99MHz
    cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
    cpu1 at mainbus0: apid 2 (application processor)
    cpu1: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.02 MHz
    cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
    cpu1: 256KB 64b/line 8-way L2 cache
    cpu1: smt 0, core 1, package 0
    ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
    acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
    acpiprt0 at acpi0: bus 0 (PCI0)
    acpiprt1 at acpi0: bus -1 (P0P1)
    acpiprt2 at acpi0: bus 2 (RP01)
    acpiprt3 at acpi0: bus 3 (RP02)
    acpiprt4 at acpi0: bus -1 (RP03)
    acpiprt5 at acpi0: bus -1 (RP04)
    acpiprt6 at acpi0: bus -1 (RP05)
    acpiprt7 at acpi0: bus -1 (RP06)
    acpiprt8 at acpi0: bus -1 (RP07)
    acpiprt9 at acpi0: bus -1 (RP08)
    acpiprt10 at acpi0: bus 1 (PEG0)
    acpiprt11 at acpi0: bus -1 (PEG1)
    acpiprt12 at acpi0: bus -1 (PEG2)
    acpiprt13 at acpi0: bus -1 (PEG3)
    acpiec0 at acpi0
    acpicpu0 at acpi0: C1, PSS
    acpicpu1 at acpi0: C1, PSS
    acpibat0 at acpi0: BAT1 model "Li_Ion_4000mA " serial 684 type Lion oem "SONY "
    acpiac0 at acpi0: AC unit online
    acpibtn0 at acpi0: PWRB
    acpibtn1 at acpi0: LID0
    acpibtn2 at acpi0: SLPB
    acpivideo0 at acpi0: GFX0
    acpivout0 at acpivideo0: DD02
    cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
    pci0 at mainbus0 bus 0
    pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
    ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
    pci1 at ppb0 bus 1
    vendor "NVIDIA", unknown product 0x1140 (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured
    vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
    intagp0 at vga1
    agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
    inteldrm0 at vga1
    drm0 at inteldrm0
    drm: failed to retrieve link info, disabling eDP
    inteldrm0: 1366x768
    wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
    wsdisplay0: screen 1-5 added (std, vt100 emulation)
    "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
    ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
    usb0 at ehci0: USB revision 2.0
    uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
    azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
    azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
    audio0 at azalia0
    ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
    pci2 at ppb1 bus 2
    bge0 at pci2 dev 0 function 0 "Broadcom BCM57785" rev 0x10, BCM57765 B0 (0x57785100): msi, address b8:88:e3:d3:08:70
    brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 4
    sdhc0 at pci2 dev 0 function 1 "Broadcom SD Host Controller" rev 0x10: apic 0 int 17
    sdhc0 at 0x10: can't map registers
    vendor "Broadcom", unknown product 0x16be (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 2 not configured
    vendor "Broadcom", unknown product 0x16bf (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 3 not configured
    ppb2 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
    pci3 at ppb2 bus 3
    "Atheros AR9485" rev 0x01 at pci3 dev 0 function 0 not configured
    ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
    usb1 at ehci1: USB revision 2.0
    uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
    pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
    ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
    scsibus0 at ahci0: 32 targets
    sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500325AS, 0001> SCSI3 0/direct fixed naa.5000c5005c9384dd
    sd0: 476940MB, 512 bytes/sector, 976773168 sectors
    cd0 at scsibus0 targ 2 lun 0: <PIONEER, DVD-RW DVRTD11RS, 1.01> ATAPI 5/cdrom removable
    ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 19
    iic0 at ichiic0
    spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
    isa0 at pcib0
    isadma0 at isa0
    pckbc0 at isa0 port 0x60/5
    pckbd0 at pckbc0 (kbd slot)
    pckbc0: using irq 1 for kbd slot
    wskbd0 at pckbd0: console keyboard, using wsdisplay0
    pms0 at pckbc0 (aux slot)
    pckbc0: using irq 12 for aux slot
    wsmouse0 at pms0 mux 0
    pms0: Elantech Touchpad, version 3, firmware 0x450f01
    pcppi0 at isa0 port 0x61
    spkr0 at pcppi0
    uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
    uvideo0 at uhub2 port 3 configuration 1 interface 0 "SunplusIT INC. HD WebCam" rev 2.00/44.02 addr 3
    video0 at uvideo0
    uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
    uhidev0 at uhub3 port 1 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 3
    uhidev0: iclass 3/1
    ums0 at uhidev0: 5 buttons, Z dir
    wsmouse1 at ums0 mux 0
    vscsi0 at root
    scsibus1 at vscsi0: 256 targets
    softraid0 at root
    scsibus2 at softraid0: 256 targets
    root on sd0a (aa2274dc7090884c.a) swap on sd0b dump on sd0b
    syncing disks... done
    OpenBSD 5.5-current (GENERIC.MP) #12: Fri Mar 21 10:52:57 MDT 2014
        deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
    real mem = 4163629056 (3970MB)
    avail mem = 4044062720 (3856MB)
    mainbus0 at root
    bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6df0 (38 entries)
    bios0: vendor Acer version "V2.21" date 12/16/2013
    bios0: Acer Aspire E1-531G
    acpi0 at bios0: rev 2
    acpi0: sleep states S0 S3 S4 S5
    acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT SSDT SSDT SSDT
    acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...]
    acpitimer0 at acpi0: 3579545 Hz, 24 bits
    acpihpet0 at acpi0: 14318179 Hz
    acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
    cpu0 at mainbus0: apid 0 (boot processor)
    cpu0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.39 MHz
    cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
    cpu0: 256KB 64b/line 8-way L2 cache
    cpu0: smt 0, core 0, package 0
    mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
    cpu0: apic clock running at 99MHz
    cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
    cpu1 at mainbus0: apid 2 (application processor)
    cpu1: Intel(R) Pentium(R) CPU B960 @ 2.20GHz, 2195.01 MHz
    cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
    cpu1: 256KB 64b/line 8-way L2 cache
    cpu1: smt 0, core 1, package 0
    ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
    acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
    acpiprt0 at acpi0: bus 0 (PCI0)
    acpiprt1 at acpi0: bus -1 (P0P1)
    acpiprt2 at acpi0: bus 2 (RP01)
    acpiprt3 at acpi0: bus 3 (RP02)
    acpiprt4 at acpi0: bus -1 (RP03)
    acpiprt5 at acpi0: bus -1 (RP04)
    acpiprt6 at acpi0: bus -1 (RP05)
    acpiprt7 at acpi0: bus -1 (RP06)
    acpiprt8 at acpi0: bus -1 (RP07)
    acpiprt9 at acpi0: bus -1 (RP08)
    acpiprt10 at acpi0: bus 1 (PEG0)
    acpiprt11 at acpi0: bus -1 (PEG1)
    acpiprt12 at acpi0: bus -1 (PEG2)
    acpiprt13 at acpi0: bus -1 (PEG3)
    acpiec0 at acpi0
    acpicpu0 at acpi0: C3, C2, C1, PSS
    acpicpu1 at acpi0: C3, C2, C1, PSS
    acpibat0 at acpi0: BAT1 model "Li_Ion_4000mA " serial 684 type Lion oem "SONY "
    acpiac0 at acpi0: AC unit offline
    acpibtn0 at acpi0: PWRB
    acpibtn1 at acpi0: LID0
    acpibtn2 at acpi0: SLPB
    acpivideo0 at acpi0: GFX0
    acpivout0 at acpivideo0: DD02
    cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
    pci0 at mainbus0 bus 0
    pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
    ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
    pci1 at ppb0 bus 1
    vendor "NVIDIA", unknown product 0x1140 (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured
    vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
    intagp0 at vga1
    agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
    inteldrm0 at vga1
    drm0 at inteldrm0
    drm: failed to retrieve link info, disabling eDP
    inteldrm0: 1366x768
    wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
    wsdisplay0: screen 1-5 added (std, vt100 emulation)
    "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
    ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
    usb0 at ehci0: USB revision 2.0
    uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
    azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
    azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
    audio0 at azalia0
    ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
    pci2 at ppb1 bus 2
    bge0 at pci2 dev 0 function 0 "Broadcom BCM57785" rev 0x10, BCM57765 B0 (0x57785100): msi, address b8:88:e3:d3:08:70
    brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 4
    sdhc0 at pci2 dev 0 function 1 "Broadcom SD Host Controller" rev 0x10: apic 0 int 17
    sdhc0 at 0x10: can't map registers
    vendor "Broadcom", unknown product 0x16be (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 2 not configured
    vendor "Broadcom", unknown product 0x16bf (class system subclass miscellaneous, rev 0x10) at pci2 dev 0 function 3 not configured
    ppb2 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
    pci3 at ppb2 bus 3
    "Atheros AR9485" rev 0x01 at pci3 dev 0 function 0 not configured
    ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
    usb1 at ehci1: USB revision 2.0
    uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
    pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
    ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
    scsibus0 at ahci0: 32 targets
    sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500325AS, 0001> SCSI3 0/direct fixed naa.5000c5005c9384dd
    sd0: 476940MB, 512 bytes/sector, 976773168 sectors
    cd0 at scsibus0 targ 2 lun 0: <PIONEER, DVD-RW DVRTD11RS, 1.01> ATAPI 5/cdrom removable
    ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 19
    iic0 at ichiic0
    spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
    isa0 at pcib0
    isadma0 at isa0
    pckbc0 at isa0 port 0x60/5
    pckbd0 at pckbc0 (kbd slot)
    pckbc0: using irq 1 for kbd slot
    wskbd0 at pckbd0: console keyboard, using wsdisplay0
    pms0 at pckbc0 (aux slot)
    pckbc0: using irq 12 for aux slot
    wsmouse0 at pms0 mux 0
    pms0: Elantech Touchpad, version 3, firmware 0x450f01
    pcppi0 at isa0 port 0x61
    spkr0 at pcppi0
    uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
    uvideo0 at uhub2 port 3 configuration 1 interface 0 "SunplusIT INC. HD WebCam" rev 2.00/44.02 addr 3
    video0 at uvideo0
    uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
    uhidev0 at uhub3 port 1 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 3
    uhidev0: iclass 3/1
    ums0 at uhidev0: 5 buttons, Z dir
    wsmouse1 at ums0 mux 0
    vscsi0 at root
    scsibus1 at vscsi0: 256 targets
    softraid0 at root
    scsibus2 at softraid0: 256 targets
    root on sd0a (aa2274dc7090884c.a) swap on sd0b dump on sd0b
UEFI BIOS images have following hashes:
Code:
BIOS_Acer_2.17_A_A
MD5: C881753211EC34D542A061FFACC0B732
SHA1: 4070D2168FC0A24B81EB76126D01E15789CE1D89
SHA256: 2AFB9061D49065EE744F5725BAEF15F963E6E3C803B279A2BDB33C0437B8904D
SHA-512: BCECB664C04F7CE298D6B11EFFB5A98C2CEE840AF8B308DAD09E46E41D28270065AB4EDEE8F69FFED4EBE885255CABBD10D4447B51D5E6BC93B3BFE24FF3AA3A
Whirpool: 35590D3B770338C1F7F025169D176AAD41078B3995DDA7AE079B8B86A6F856EDE38E14184512B7BDF916400DDDFA851F39763C374130111B67CBE5D7D40C09AF

**
BIOS_Acer_2.21_A_A
MD5: 9A7FBF95058EACD31E2465985917B225
SHA1: 519658E524734080CB50A952349FFBBD27C3C774
SHA256: 26E4733AE6623497F47EEBB61C70854417F69E03E5F6BEE8F84EA582C0786C26
SHA512: 79486D30D699FD17B1B1B8657A5AE9A7CA1BB76259F5DE20FA67F3270555543F364FF158F4AB7545BAFCF9F2AD1DD54AEDAB70ADE8554C4DD56F782A46BA687F
Whirpool: 44F4B562DCB3CEAE7F76C0E8ADAC3A2E5619EA2999C3578A0AFB832008D0D70D463E05F26540DBAE4D6CCFF26E5BEA981B1396B0D02453C6374CC651B76B6114
Just in case of NSA Bios malware
Reply With Quote
Old 19th September 2014
Jtf Jtf is offline
Port Guard
 
Join Date: Nov 2013
Posts: 17
Default

My one is an Acer Aspire One 772. The down side is it has a BCM4313 chip which means I had to get a N-300 USB adapter with an RTL8192CU chip. On the bright side, the Radeon Graphics performance is quiet good. This is the first time have a BSD installation that is utilizing KMS. What surprised me the most was the ability to suspend and resume very smoothly and also faster then my Linux and Windows installations on the same machine. Something I never expected with any BSD on a laptop made in 2012.

Code:
OpenBSD 5.6-current (GENERIC.MP) #372: Wed Sep 10 18:03:54 MDT 2014
    todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 3987992576 (3803MB)
avail mem = 3873099776 (3693MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.04" date 06/08/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-50 Processor, 998.34 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD C-50 Processor, 997.51 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT1 model "13848633228217409" serial b5d6 type Lion oem "Sanyo "
acpiac0 at acpi0: AC unit online
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 998 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Conexant/0x506c
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2, firmware 0x40213
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub1 port 1 configuration 1 interface 0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2
video0 at uvideo0
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (4752f806cf2cc091.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (PALM 0x1002:0x9804 0x1025:0x0598).
radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Internal thermal controller without fan control
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
urtwn0 at uhub0 port 1 "D-Link DWA-131 rev B" rev 2.00/2.00 addr 2
urtwn0: could not set configuration no
urtwn0 detached
urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67
syncing disks... 
OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014
    todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 3987992576 (3803MB)
avail mem = 3876450304 (3696MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.04" date 06/08/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-50 Processor, 998.33 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon HD 6310 HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
"ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
urtwn0 at uhub0 port 1 "vendor 0x2001 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014
    todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 3987992576 (3803MB)
avail mem = 3876450304 (3696MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.04" date 06/08/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-50 Processor, 998.17 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon HD 6310 HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
"ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
urtwn0 at uhub0 port 1 "vendor 0x2001 product 0x330d" rev 2.00/2.00 addr 2
OpenBSD 5.6-current (GENERIC.MP) #372: Wed Sep 10 18:03:54 MDT 2014
    todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 3987992576 (3803MB)
avail mem = 3873099776 (3693MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.04" date 06/08/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-50 Processor, 998.32 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD C-50 Processor, 997.51 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT1 model "13848633228217409" serial b5d6 type Lion oem "Sanyo "
acpiac0 at acpi0: AC unit online
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 998 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Conexant/0x506c
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2, firmware 0x40213
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67
uvideo0 at uhub1 port 1 configuration 1 interface 0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2
video0 at uvideo0
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (4752f806cf2cc091.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (PALM 0x1002:0x9804 0x1025:0x0598).
radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Internal thermal controller without fan control
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... 
OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014
    todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 3987992576 (3803MB)
avail mem = 3876450304 (3696MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.04" date 06/08/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-50 Processor, 997.67 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
vga1 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon HD 6310 HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
"ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
"Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2 at uhub1 port 1 not configured
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 16 not configured
uhid at uhidev1 reportid 17 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67
syncing disks... done
OpenBSD 5.6-current (GENERIC.MP) #383: Wed Sep 17 12:05:19 MDT 2014
    todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 3987992576 (3803MB)
avail mem = 3873099776 (3693MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe3e70 (51 entries)
bios0: vendor Acer version "V1.04" date 06/08/2011
bios0: Acer AO722
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT SSDT
acpi0: wakeup devices SPB2(S4) GEC_(S4) USB0(S3) USB4(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD C-50 Processor, 998.34 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD C-50 Processor, 997.50 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus -1 (PB5_)
acpiprt5 at acpi0: bus -1 (PB6_)
acpiprt6 at acpi0: bus -1 (PB7_)
acpiprt7 at acpi0: bus 2 (SPB0)
acpiprt8 at acpi0: bus -1 (SPB1)
acpiprt9 at acpi0: bus 6 (SPB2)
acpiprt10 at acpi0: bus 7 (SPB3)
acpiprt11 at acpi0: bus 1 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT1 model "13848633228217409" serial b5d6 type Lion oem "Sanyo "
acpiac0 at acpi0: AC unit online
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 998 MHz: speeds: 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c3c374
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Conexant/0x506c
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 6
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address b8:70:f4:a2:63:af
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
pci4 at ppb3 bus 7
"Broadcom BCM4313" rev 0x01 at pci4 dev 0 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 2, firmware 0x40213
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
urtwn0 at uhub0 port 1 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 9c:d6:43:5b:64:67
uvideo0 at uhub1 port 1 configuration 1 interface 0 "Y2B6Y01TC WebCam" rev 2.00/0.04 addr 2
video0 at uvideo0
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (4752f806cf2cc091.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (PALM 0x1002:0x9804 0x1025:0x0598).
radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeondrm0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Internal thermal controller without fan control
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Reply With Quote
Old 20th September 2014
bsd-keith bsd-keith is offline
Real Name: Keith
Open Source Software user
 
Join Date: Jun 2014
Location: Surrey/Hants Border, England
Posts: 343
Default

I also have an AAO722 with AMD C50, I swapped the Broadcom for an Intel internal mini PCI wifi card, & have had no bother with wifi since.

I've had FreeBSD, GhostBSD & PC-BSD running on mine, at different times, (as well as AnitiX Linux), great little netbook.
__________________
Linux since 1999, & also a BSD user.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Your FreeBSD Laptop vermaden FreeBSD General 67 6th June 2014 12:27 PM
OpenBSD = Awesome Laptop OS revzalot OpenBSD General 8 9th September 2008 07:12 AM
Laptop Repair DrJ General Hardware 4 25th August 2008 02:30 PM
laptop cw_ FreeBSD General 21 14th August 2008 02:48 AM
Dual-boot laptop won't boot OpenBSD after upgrade to 4.3 kbeaucha OpenBSD Installation and Upgrading 17 30th May 2008 02:40 PM


All times are GMT. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick