Quote:
Originally Posted by jggimi
Sorry I wasn't clear. Start with ifconfig(8) and routing tables -- if the issue is with IPv4, you can limit your routing table output to that family, such as with $ route -n show -inet
|
Code:
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default xxx.xxx.xxx.1 UGS 1 1366 - 8 re1
127/8 127.0.0.1 UGRS 0 0 33152 8 lo0
127.0.0.1 127.0.0.1 UH 3 50 33152 4 lo0
xxx.xxx.xxx/24 link#2 UC 1 0 - 4 re1
xxx.xxx.xxx.1 f4:b5:2f:07:b0:cf UHLc 1 0 - 4 re1
xxx.xxx.xxx.129 127.0.0.1 UGHS 0 0 33152 8 lo0
192.168.50/24 link#9 UC 0 0 - 4 vlan200
192.168.100/24 link#3 UC 0 0 - 4 fxp0
192.168.110/24 link#7 UC 5 0 - 4 vlan110
192.168.110.4 00:50:56:9e:4d:11 UHLc 0 67 - 4 vlan110
192.168.110.50 00:50:56:9f:e4:91 UHLc 0 96 - 4 vlan110
192.168.110.70 00:50:56:9f:7f:30 UHLc 0 90 - 4 vlan110
192.168.110.71 00:50:56:9f:46:01 UHLc 0 97 - 4 vlan110
192.168.110.72 00:50:56:9f:82:96 UHLc 0 306 - 4 vlan110
192.168.120/24 link#8 UC 2 0 - 4 vlan120
192.168.120.2 00:50:56:9e:18:62 UHLc 0 440 - 4 vlan120
192.168.120.3 00:50:56:9e:72:16 UHLc 0 382 - 4 vlan120
192.168.150/24 link#10 UC 0 0 - 4 vlan300
192.168.200/24 link#1 UC 12 0 - 4 re0
192.168.200.9 00:50:56:80:d7:bf UHLc 0 15 - 4 re0
192.168.200.10 00:50:56:9e:08:c5 UHLc 0 47 - 4 re0
192.168.200.11 00:50:56:9e:30:24 UHLc 0 299 - 4 re0
192.168.200.13 00:50:56:80:bb:e4 UHLc 0 0 - 4 re0
192.168.200.16 00:25:90:c5:92:b7 UHLc 0 9 - 4 re0
192.168.200.17 00:30:48:dc:76:75 UHLc 0 50 - 4 re0
192.168.200.22 00:50:56:9f:3b:8d UHLc 0 12 - 4 re0
192.168.200.51 00:50:56:80:f7:70 UHLc 1 130 - 4 re0
192.168.200.56 00:50:56:80:7e:00 UHLc 0 23 - 4 re0
192.168.200.113 1c:6f:65:35:08:b3 UHLc 0 587 - 4 re0
192.168.200.119 10:1c:0c:65:f4:e2 UHLc 0 0 - 4 re0
192.168.200.132 00:26:b8:9c:24:14 UHLc 0 0 - 4 re0
224/4 127.0.0.1 URS 0 0 33152 8 lo0
Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33152
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:25:90:3a:62:1e
priority: 0
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet 192.168.200.252 netmask 0xffffff00 broadcast 192.168.200.255
inet6 fe80::000:000:000:000e%re0 prefixlen 64 scopeid 0x1
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:25:90:3a:62:1f
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet6 fe80::000:000:000:000f%re1 prefixlen 64 scopeid 0x2
inet xxx.xxx.xxx.xxx netmask 0xffffff00 broadcast xxx.xxx.xxx.255
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:a8:00:e8:ad
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.100.252 netmask 0xffffff00 broadcast 192.168.100.255
inet6 fe80::2d0:a8ff:fe00:e8ad%fxp0 prefixlen 64 scopeid 0x3
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:a8:00:e8:ae
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::2d0:a8ff:fe00:e8ae%fxp1 prefixlen 64 scopeid 0x4
enc0: flags=0<>
priority: 0
groups: enc
status: active
vlan110: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:a8:00:e8:ae
priority: 0
vlan: 110 parent interface: fxp1
groups: vlan
status: active
inet6 fe80::2d0:a8ff:fe00:e8ae%vlan110 prefixlen 64 scopeid 0x7
inet 192.168.110.1 netmask 0xffffff00 broadcast 192.168.110.255
vlan120: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:a8:00:e8:ae
priority: 0
vlan: 120 parent interface: fxp1
groups: vlan
status: active
inet6 fe80::2d0:a8ff:fe00:e8ae%vlan120 prefixlen 64 scopeid 0x8
inet 192.168.120.1 netmask 0xffffff00 broadcast 192.168.120.255
vlan200: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:a8:00:e8:ae
priority: 0
vlan: 200 parent interface: fxp1
groups: vlan
status: active
inet6 fe80::2d0:a8ff:fe00:e8ae%vlan200 prefixlen 64 scopeid 0x9
inet 192.168.50.253 netmask 0xffffff00 broadcast 192.168.50.255
vlan300: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:d0:a8:00:e8:ae
priority: 0
vlan: 300 parent interface: fxp1
groups: vlan
status: active
inet6 fe80::2d0:a8ff:fe00:e8ae%vlan300 prefixlen 64 scopeid 0xa
inet 192.168.150.1 netmask 0xffffff00 broadcast 192.168.150.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33152
priority: 0
groups: pflog