DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 23rd October 2010
kapu's Avatar
kapu kapu is offline
Port Guard
 
Join Date: Feb 2009
Location: US- NY
Posts: 11
Default X configuration of Dell Inspiron 1150 no LCD and VGA auto

Solving this is good for 1 free good karma point (redeemable upon expiration.)
I'm what you may call new to X, kinda. I want it for wmii etc..
I'm also what you may call "Broke as fu*k" having to find creative ways to remain connected.
So that may explain the cutting edge hardware for you.
So far no joy. Eyes are kinda blurry, know its something stupid...
Hey I have a cold, and the cold medicine is making me numb :-P

# X -config <path to xorg.conf>
blanks the screen, and shortly thereafter reappears with errors, then shuts off.(loses signal)

All terminals disconnect, box unavailable. reboot...

Log back in, Now what? why is /var/log/Xorg.0.log 0 bytes?

$tail /var/log/messages
Code:
Oct 23 10:51:48 poman syslogd: start
Oct 23 10:51:48 poman /bsd: OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
Oct 23 10:51:48 poman /bsd:     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
Oct 23 10:51:48 poman /bsd: cpu0: Intel(R) Celeron(R) CPU 2.60GHz ("GenuineIntel" 686-class) 2.60 GHz
Oct 23 10:51:48 poman /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
Oct 23 10:51:48 poman /bsd: real mem  = 266731520 (254MB)
Oct 23 10:51:48 poman /bsd: avail mem = 249737216 (238MB)
Oct 23 10:51:48 poman /bsd: mainbus0 at root
Oct 23 10:51:48 poman /bsd: bios0 at mainbus0: AT/286+ BIOS, date 06/05/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf96a0 (40 entries)
Oct 23 10:51:48 poman /bsd: bios0: vendor Dell Computer Corporation version "A07" date 06/05/2005
Oct 23 10:51:48 poman /bsd: bios0: Dell Computer Corporation Inspiron 1150
Oct 23 10:51:48 poman /bsd: acpi0 at bios0: rev 0
Oct 23 10:51:48 poman /bsd: acpi0: tables DSDT FACP
Oct 23 10:51:48 poman /bsd: acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S1) USB1(S1) USB2(S1) USB3(S1) MODM(S3) PCIE(S4)
Oct 23 10:51:48 poman /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits
Oct 23 10:51:48 poman /bsd: acpiprt0 at acpi0: bus 0 (PCI0)
Oct 23 10:51:48 poman /bsd: acpiprt1 at acpi0: bus 2 (PCIE)
Oct 23 10:51:49 poman /bsd: acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals  last
Oct 23 10:51:49 poman /bsd: acpicpu0: struck PSS entry, core frequency equals  last
Oct 23 10:51:49 poman last message repeated 3 times
Oct 23 10:51:49 poman /bsd: : C2, FVS, 1040384 MHz
Oct 23 10:51:49 poman /bsd: acpitz0 at acpi0: critical temperature 78 degC
Oct 23 10:51:49 poman /bsd: acpiac0 at acpi0: AC unit online
Oct 23 10:51:49 poman /bsd: acpibat0 at acpi0: BAT0 model "DELL H2369" serial 1 type LION oem "Simplo"
Oct 23 10:51:49 poman /bsd: acpibtn0 at acpi0: LID_
Oct 23 10:51:49 poman /bsd: acpibtn1 at acpi0: PBTN
Oct 23 10:51:49 poman /bsd: acpibtn2 at acpi0: SBTN
Oct 23 10:51:49 poman /bsd: acpivideo0 at acpi0: VID_
Oct 23 10:51:49 poman /bsd: acpivout0 at acpivideo0: CRT_
Oct 23 10:51:49 poman /bsd: acpivout1 at acpivideo0: LCD_
Oct 23 10:51:49 poman /bsd: acpivout2 at acpivideo0: DVI_
Oct 23 10:51:49 poman /bsd: acpivideo1 at acpi0: VID2
Oct 23 10:51:49 poman /bsd: bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x800 0xcd000/0x800 0xcd800/0x800 0xce000/0x800 0xce800/0x800 0xcf000/0x800 0xcf800/0x800
Oct 23 10:51:49 poman /bsd: cpu0 at mainbus0: (uniprocessor)
Oct 23 10:51:49 poman /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios)
Oct 23 10:51:49 poman /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
Oct 23 10:51:49 poman /bsd: "Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
Oct 23 10:51:49 poman /bsd: "Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
Oct 23 10:51:49 poman /bsd: vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
Oct 23 10:51:49 poman /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
Oct 23 10:51:49 poman /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
Oct 23 10:51:49 poman /bsd: intagp0 at vga1
Oct 23 10:51:49 poman /bsd: agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
Oct 23 10:51:49 poman /bsd: inteldrm0 at vga1: irq 11
Oct 23 10:51:49 poman /bsd: drm0 at inteldrm0
Oct 23 10:51:49 poman /bsd: "Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
Oct 23 10:51:49 poman /bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
Oct 23 10:51:49 poman /bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
Oct 23 10:51:49 poman /bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
Oct 23 10:51:49 poman /bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
Oct 23 10:51:49 poman /bsd: usb0 at ehci0: USB revision 2.0
Oct 23 10:51:49 poman /bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
Oct 23 10:51:49 poman /bsd: ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
Oct 23 10:51:49 poman /bsd: pci1 at ppb0 bus 2
Oct 23 10:51:49 poman /bsd: bce0 at pci1 dev 1 function 0 "Broadcom BCM4401" rev 0x01: irq 11, address 00:11:43:66:10:a1
Oct 23 10:51:49 poman /bsd: bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
Oct 23 10:51:49 poman /bsd: bwi0 at pci1 dev 2 function 0 "Broadcom BCM4306" rev 0x03: irq 11, address 00:0b:7d:11:b1:3f
Oct 23 10:51:49 poman /bsd: cbb0 at pci1 dev 4 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11, CardBus support disabled
Oct 23 10:51:49 poman /bsd: cardslot0 at cbb0 slot 0 flags 0
Oct 23 10:51:49 poman /bsd: pcmcia0 at cardslot0
Oct 23 10:51:49 poman /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
Oct 23 10:51:49 poman /bsd: pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
Oct 23 10:51:50 poman /bsd: atapiscsi0 at pciide0 channel 0 drive 0
Oct 23 10:51:50 poman /bsd: scsibus0 at atapiscsi0: 2 targets
Oct 23 10:51:50 poman /bsd: cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324S, U303> ATAPI 5/cdrom removable
Oct 23 10:51:50 poman /bsd: cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
Oct 23 10:51:50 poman /bsd: wd0 at pciide0 channel 1 drive 0: <HTS548040M9AT00>
Oct 23 10:51:50 poman /bsd: wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
Oct 23 10:51:50 poman /bsd: wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
Oct 23 10:51:50 poman /bsd: auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
Oct 23 10:51:50 poman /bsd: ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
Oct 23 10:51:50 poman /bsd: ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
Oct 23 10:51:50 poman /bsd: audio0 at auich0
Oct 23 10:51:50 poman /bsd: "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
Oct 23 10:51:50 poman /bsd: usb1 at uhci0: USB revision 1.0
Oct 23 10:51:50 poman /bsd: uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Oct 23 10:51:50 poman /bsd: usb2 at uhci1: USB revision 1.0
Oct 23 10:51:50 poman /bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Oct 23 10:51:50 poman /bsd: usb3 at uhci2: USB revision 1.0
Oct 23 10:51:50 poman /bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Oct 23 10:51:50 poman /bsd: isa0 at ichpcib0
Oct 23 10:51:50 poman /bsd: isadma0 at isa0
Oct 23 10:51:50 poman /bsd: pckbc0 at isa0 port 0x60/5
Oct 23 10:51:50 poman /bsd: pckbd0 at pckbc0 (kbd slot)
Oct 23 10:51:50 poman /bsd: pckbc0: using irq 1 for kbd slot
Oct 23 10:51:50 poman /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
Oct 23 10:51:50 poman /bsd: pms0 at pckbc0 (aux slot)
Oct 23 10:51:50 poman /bsd: pckbc0: using irq 12 for aux slot
Oct 23 10:51:50 poman /bsd: wsmouse0 at pms0 mux 0
Oct 23 10:51:50 poman /bsd: pcppi0 at isa0 port 0x61
Oct 23 10:51:50 poman /bsd: midi0 at pcppi0: <PC speaker>
Oct 23 10:51:50 poman /bsd: spkr0 at pcppi0
Oct 23 10:51:50 poman /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
Oct 23 10:51:50 poman /bsd: biomask edfd netmask edfd ttymask ffff
Oct 23 10:51:50 poman /bsd: mtrr: Pentium Pro MTRR support
Oct 23 10:51:50 poman /bsd: uhidev0 at uhub1 port 1 configuration 1 interface 0 "Holtek product 0x048e" rev 1.10/7.00 addr 2
Oct 23 10:51:50 poman /bsd: uhidev0: iclass 3/1
Oct 23 10:51:50 poman /bsd: ums0 at uhidev0: 3 buttons, Z dir
Oct 23 10:51:50 poman /bsd: wsmouse1 at ums0 mux 0
Oct 23 10:51:50 poman /bsd: uhidev1 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech USB Keyboard" rev 1.10/28.00 addr 2
Oct 23 10:51:50 poman /bsd: uhidev1: iclass 3/1
Oct 23 10:51:50 poman /bsd: ukbd0 at uhidev1: 8 modifier keys, 6 key codes
Oct 23 10:51:50 poman /bsd: wskbd1 at ukbd0 mux 1
Oct 23 10:51:50 poman /bsd: wskbd1: connecting to wsdisplay0
Oct 23 10:51:50 poman /bsd: vscsi0 at root
Oct 23 10:51:50 poman /bsd: scsibus1 at vscsi0: 256 targets
Oct 23 10:51:50 poman /bsd: softraid0 at root
Oct 23 10:51:50 poman /bsd: root on wd0a swap on wd0b dump on wd0b
Oct 23 10:51:50 poman /bsd: WARNING: / was not properly unmounted
Oct 23 10:51:50 poman savecore: no core dump



HARDWAREOS
OpenBSD 4.7 generic stable

dmesg:
Code:
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.60GHz ("GenuineIntel" 686-class) 2.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 266731520 (254MB)
avail mem = 249737216 (238MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/05/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf96a0 (40 entries)
bios0: vendor Dell Computer Corporation version "A07" date 06/05/2005
bios0: Dell Computer Corporation Inspiron 1150
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S1) USB1(S1) USB2(S1) USB3(S1) MODM(S3) PCIE(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCIE)
acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals  last
acpicpu0: struck PSS entry, core frequency equals  last
acpicpu0: struck PSS entry, core frequency equals  last
acpicpu0: struck PSS entry, core frequency equals  last
acpicpu0: struck PSS entry, core frequency equals  last
: C2, FVS, 1040384 MHz
acpitz0 at acpi0: critical temperature 78 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL H2369" serial 1 type LION oem "Simplo"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: CRT_
acpivout1 at acpivideo0: LCD_
acpivout2 at acpivideo0: DVI_
acpivideo1 at acpi0: VID2
bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x800 0xcd000/0x800 0xcd800/0x800 0xce000/0x800 0xce800/0x800 0xcf000/0x800 0xcf800/0x800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1: irq 11
drm0 at inteldrm0
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 2
bce0 at pci1 dev 1 function 0 "Broadcom BCM4401" rev 0x01: irq 11, address <snip>
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
bwi0 at pci1 dev 2 function 0 "Broadcom BCM4306" rev 0x03: irq 11, address <snip>
cbb0 at pci1 dev 4 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11, CardBus support disabled
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324S, U303> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0 at pciide0 channel 1 drive 0: <HTS548040M9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask edfd netmask edfd ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Holtek product 0x048e" rev 1.10/7.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech USB Keyboard" rev 1.10/28.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
error: [drm:pid28142:i915_irq_emit] *ERROR* i915_irq_emit called without lock held
xorg.conf:
Code:
Section "ServerLayout"
        Identifier     "Poor Piece of Poop"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
        FontPath     "/usr/X11R6/lib/X11/fonts/OTF"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection


Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "wsmouse"
        Option      "Device" "/dev/wsmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "DELL 2707WFP"
Option "DPMS"
HorizSync 30-75
VertRefresh 30-60
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Driver      "intel"
        Option      "AccelMethod" "UXA"
        VideoRam 130560
        VendorName  "Intel"
        BoardName   "82855GM Video"
        BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card1"
        Driver      "intel"
        Option      "AccelMethod" "UXA"
        VideoRam 130560
        VendorName  "Intel"
        BoardName   "82855GM Video"
        BusID       "PCI:0:2:1"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "DELL 2707WFP"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
EndSection
$ lspci
Code:
pcilib: Cannot open /dev/pci
lspci: Cannot find any working access method.
$ sudo lspci
pcilib: Bus 00 seen twice (firmware bug). Ignored. 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) 02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) 02:04.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
$ sudo lspci -v
pcilib: Bus 00 seen twice (firmware bug). Ignored. 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Dell Device 017f Flags: bus master, fast devsel, latency 0 Memory at <unassigned> (32-bit, prefetchable) Capabilities: [40] Vendor Specific Information <?> 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Dell Device 017f Flags: bus master, fast devsel, latency 0 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Dell Device 017f Flags: bus master, fast devsel, latency 0 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA controller]) Subsystem: Dell Device 017f Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e8000000 (32-bit, prefetchable) Memory at f6f80000 (32-bit, non-prefetchable) I/O ports at c000 Capabilities: [d0] Power Management version 1 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Subsystem: Dell Device 017f Flags: bus master, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) Memory at f6f00000 (32-bit, non-prefetchable) Capabilities: [d0] Power Management version 1 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at bf80 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at bf40 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at bf20 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 0, IRQ 11 Memory at f6effc00 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=0080 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000efff Memory behind bridge: f8000000-fdffffff 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at 01f0 I/O ports at 03f4 I/O ports at 0170 I/O ports at 0374 I/O ports at bfa0 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at c800 I/O ports at cc40 Memory at f6eff800 (32-bit, non-prefetchable) Memory at f6eff400 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic]) Subsystem: Conexant Systems, Inc. D480 MDC V.9x Modem Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at c400 I/O ports at c080 Capabilities: [50] Power Management version 2 02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) Subsystem: Dell Device 017f Flags: bus master, fast devsel, latency 32, IRQ 11 Memory at fcffe000 (32-bit, non-prefetchable) Expansion ROM at fd000000 [disabled] Capabilities: [40] Power Management version 2 02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) Subsystem: Dell Wireless 1350 WLAN Mini-PCI Card Flags: bus master, fast devsel, latency 32, IRQ 11 Memory at fcffc000 (32-bit, non-prefetchable) 02:04.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller Subsystem: Dell Device 017f Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at fd000000 (32-bit, non-prefetchable) Bus: primary=00, secondary=00, subordinate=00, sec-latency=32 16-bit legacy interface ports at 0001
$ sudo lspci -n
Code:
pcilib: Bus 00 seen twice (firmware bug). Ignored.
00:00.0 0600: 8086:3580 (rev 02)
00:00.1 0880: 8086:3584 (rev 02)
00:00.3 0880: 8086:3585 (rev 02)
00:02.0 0300: 8086:3582 (rev 02)
00:02.1 0380: 8086:3582 (rev 02)
00:1d.0 0c03: 8086:24c2 (rev 01)
00:1d.1 0c03: 8086:24c4 (rev 01)
00:1d.2 0c03: 8086:24c7 (rev 01)
00:1d.7 0c03: 8086:24cd (rev 01)
00:1e.0 0604: 8086:2448 (rev 81)
00:1f.0 0601: 8086:24cc (rev 01)
00:1f.1 0101: 8086:24ca (rev 01)
00:1f.5 0401: 8086:24c5 (rev 01)
00:1f.6 0703: 8086:24c6 (rev 01)
02:01.0 0200: 14e4:4401 (rev 01)
02:02.0 0280: 14e4:4320 (rev 03)
02:04.0 0607: 104c:ac56

Last edited by kapu; 23rd October 2010 at 04:06 PM. Reason: whim
Reply With Quote
  #2   (View Single Post)  
Old 23rd October 2010
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Banned
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Default

Having /var/log/Xorg.0.log end up being 0 bytes tends to happen if the system panics/reboots before the buffer is flushed to disk.

If you own any other computers you could ssh to this system and tail -f the log, and you'll have a copy of the log up until the point of error.

I'm not sure if EXA/XAA is acceleration still supported by OpenBSD's intel driver, but you may wish to try them.. as well as a snapshot to confirm the issue hasn't been already been fixed.

After that, you may want to report the bug to the developers.

http://www.openbsd.org/report.html
http://www.openbsd.org/mail.html
Reply With Quote
  #3   (View Single Post)  
Old 23rd October 2010
kapu's Avatar
kapu kapu is offline
Port Guard
 
Join Date: Feb 2009
Location: US- NY
Posts: 11
Default Xorg.0.log

Code:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 i386 
Current Operating System: OpenBSD poman.audiobones.com 4.7 GENERIC#558 i386
Build Date: 15 March 2010  04:12:55PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 23 12:12:55 2010
(++) Using config file: "/etc/xorg.conf"
(==) ServerLayout "Poor Piece of Poop"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "DELL 2707WFP"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/,
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default keyboard>"
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(II) Loader magic: 0x1dc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on openbsd
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
(--) checkDevMem: using aperture driver /dev/xf86
(--) PCI:*(0:0:2:0) 8086:3582:1028:017f Intel 82855GM Video rev 2, Mem @ 0xe8000000/134217728, 0xf6f80000/524288, I/O @ 0x0000c000/8
(--) PCI: (0:0:2:1) 8086:3582:1028:017f Intel 82855GM Video rev 2, Mem @ 0xe0000000/134217728, 0xf6f00000/524288
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 2.7.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "UXA"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xF6F80000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using UXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section DELL 2707WFP
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/X11R6/lib/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/X11R6/lib/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/X11R6/lib/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/X11R6/lib/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/X11R6/lib/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: available (1 4)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "DEL", prod id 53266
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 53266
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1920x1200
(II) intel(0): Output LVDS using initial mode 1024x768
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (580, 360) mm
(**) intel(0): DPI set to (84, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) intel(0): VideoRam configuration found, which is no longer recommended.
(II) intel(0): Continuing with default 131072kB VideoRam instead of 130560 kB.
(II) intel(0): Kernel reported 52224 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 208896 kB available
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
	(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
	(Cannot allocate memory)
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x000df000 (pgoffset 223)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x000e0000 (pgoffset 224)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x000e4000 (pgoffset 228)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x000e5000 (pgoffset 229)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x000e9000 (pgoffset 233)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x008e9000 (pgoffset 2281)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x000df000:            end of stolen memory
(II) intel(0): 0x000df000-0x000dffff: Core cursor (4 kB, 0x00000000019dc000 physical
)
(II) intel(0): 0x000e0000-0x000e3fff: ARGB cursor (16 kB, 0x00000000019dd000 physical
)
(II) intel(0): 0x000e4000-0x000e4fff: Core cursor (4 kB, 0x00000000019e1000 physical
)
(II) intel(0): 0x000e5000-0x000e8fff: ARGB cursor (16 kB, 0x0000000001a71000 physical
)
(II) intel(0): 0x000e9000-0x008e8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x008e9000-0x008e9fff: overlay registers (4 kB, 0x0000000001a1c000 physical
)
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x08000000:            end of aperture
_fence_emit_internal: drm_i915_irq_emit: -22
Reply With Quote
  #4   (View Single Post)  
Old 23rd October 2010
Beastie Beastie is offline
Daemonology student
 
Join Date: Jan 2009
Location: /dev/earth0
Posts: 335
Default

One of my machines has a 845G chip (82845G/GL) and it used to freeze from time to time on FreeBSD: no way to terminate X, no remote access using ssh, nothing of interest in the logs (actually, no logging after the freeze).
I tried the older XAA but it was the same. I disabled acceleration and never experienced any freezes since then.
Code:
Option "AIGLX" "FALSE"
Option "NoAccel" "TRUE"
HTH.
__________________
May the source be with you!
Reply With Quote
  #5   (View Single Post)  
Old 25th October 2010
kapu's Avatar
kapu kapu is offline
Port Guard
 
Join Date: Feb 2009
Location: US- NY
Posts: 11
Default after setting Option "NoAccel" "TRUE"

Thank you for all the advice. I set NoAccel to TRUE and it definately made a difference. It no longer crashes the box.
I tested it by running
startx from a non root account.
it appeared to load stuff and eventually the monitor displayed
a seriously out of whack undicernable mess of mostly white stuff.
But its progress! ctrl+alt+backspace brought back my shell nicely.
here is the new config and outputXorg:

/etc/xorg.conf:
Code:
Section "ServerLayout"
	Identifier     "Poor Piece of Poop"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/OTF"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection


Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "DELL 2707WFP"
Option "DPMS"
HorizSync 30-75
VertRefresh 30-60
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        Option     "NoAccel" "True"           	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card0"
	Driver      "intel"
	VideoRam 130560
	VendorName  "Intel"
	BoardName   "82855GM Video"
	BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        Option     "NoAccel" "True"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card1"
	Driver      "intel"
	VideoRam 130560
	VendorName  "Intel"
	BoardName   "82855GM Video"
	BusID       "PCI:0:2:1"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "DELL 2707WFP"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1920x1200" "1680x1050" "1440x900" "1280x800" "960x600"
EndSubSection
EndSection
Xorg.0.log
Code:
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 i386 
Current Operating System: OpenBSD poman.audiobones.com 4.7 GENERIC#558 i386
Build Date: 15 March 2010  04:12:55PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 24 06:35:17 2010
(==) Using config file: "/etc/xorg.conf"
(==) ServerLayout "Poor Piece of Poop"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "DELL 2707WFP"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/,
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default keyboard>"
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(II) Loader magic: 0x1dc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on openbsd
(--) PCI:*(0:0:2:0) 8086:3582:1028:017f Intel 82855GM Video rev 2, Mem @ 0xe8000000/134217728, 0xf6f80000/524288, I/O @ 0x0000c000/8
(--) PCI: (0:0:2:1) 8086:3582:1028:017f Intel 82855GM Video rev 2, Mem @ 0xe0000000/134217728, 0xf6f00000/524288
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 2.7.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "NoAccel" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xF6F80000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): DRI is disabled because it needs 2D acceleration.
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section DELL 2707WFP
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/X11R6/lib/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/X11R6/lib/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/X11R6/lib/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/X11R6/lib/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/X11R6/lib/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: not available (0 1)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "DEL", prod id 53266
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 53266
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1920x1200
(II) intel(0): Output LVDS using initial mode 1024x768
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (580, 360) mm
(**) intel(0): DPI set to (84, 135)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) intel(0): VideoRam configuration found, which is no longer recommended.
(II) intel(0): Continuing with default 131072kB VideoRam instead of 130560 kB.
(II) intel(0): Kernel reported 52224 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 208896 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
	(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
	(Cannot allocate memory)
(II) intel(0): Tiled allocation successful.
(--) intel(0): Xv is disabled because it needs 2D acceleration.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(EE) intel(0): Failed to init memory manager
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x000df000 (pgoffset 223)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x000e0000 (pgoffset 224)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x000e4000 (pgoffset 228)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x000e5000 (pgoffset 229)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x000e9000 (pgoffset 233)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x008e9000 (pgoffset 2281)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x000df000:            end of stolen memory
(II) intel(0): 0x000df000-0x000dffff: Core cursor (4 kB, 0x00000000019da000 physical
)
(II) intel(0): 0x000e0000-0x000e3fff: ARGB cursor (16 kB, 0x00000000019db000 physical
)
(II) intel(0): 0x000e4000-0x000e4fff: Core cursor (4 kB, 0x00000000019df000 physical
)
(II) intel(0): 0x000e5000-0x000e8fff: ARGB cursor (16 kB, 0x0000000001a71000 physical
)
(II) intel(0): 0x000e9000-0x008e8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x008e9000-0x008e9fff: overlay registers (4 kB, 0x00000000019e0000 physical
)
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x08000000:            end of aperture
(II) intel(0): using SSC reference clock of 66 MHz
(WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane B is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 507 x 317
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(--) <default keyboard>: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 0 failed
	(Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 1 failed
	(Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 2 failed
	(Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 3 failed
	(Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 4 failed
	(Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 5 failed
	(Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 6 failed
	(Bad address)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Xorg & ps/2 mouse Lumi NetBSD General 13 20th January 2010 09:38 PM
Xorg ? dennky OpenBSD Packages and Ports 2 5th December 2009 06:41 PM
Xorg installation LordZ OpenBSD Installation and Upgrading 10 23rd November 2008 05:52 PM
Is xorg necessary....... rex FreeBSD General 10 19th October 2008 03:05 PM
xorg bug? enterhaken FreeBSD Ports and Packages 9 17th July 2008 02:38 PM


All times are GMT. The time now is 09:17 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick