DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD Installation and Upgrading

NetBSD Installation and Upgrading Have trouble getting NetBSD on your toaster?

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 22nd May 2017
tmaekawa tmaekawa is offline
New User
 
Join Date: May 2017
Posts: 1
Post installation on dell inspiron 11-3162

This post is related to the one "UEFI support " by myway_1 (http://daemonforums.org/showthread.php?t=10047).

I am new to NetBSD, and I tried to install NetBSD on Dell inspiron 11-3162.
(http://downloads.dell.com/manuals/al...uide_ja-jp.pdf)

I was told that eMMC support is implemented only in HEAD revision, in other word, it is not supported as official.

However I tried HEAD version anyway.
(http://nycdn.netbsd.org/pub/NetBSD-d...cdrom/boot.iso. This URL no longer exists, but newer version is created in daily basis.)

As the result, it didn't succeed.
The installation stopped with the following message after I selected "my disk" to the installer instruction that is "Please enter a name for your NetBSD disk".

Code:
Status: Command failed
Command: disklabel -w -r -f /tmp/disktab ld0 'mydisk'
----------------------------
sdhc0: auto_cmd12 error
sdhc0: data crc error
ld0d: error writing fsbn 0 of 0 - 15 (ld0 bn 0; cn0 tn 0 sn 0), retrying
...
(the above 3 lines are repeated several times)
...
disklabel: disklabel write (sector 0) size 8192 failed: Connection timed out
If possible, I want to know when eMMC support can be testable on X86 PC in HEAD version. I tried to find appropriate mailing lists to ask this but couldn't understand which one I should ask.

Here is the dmesg:
Code:
NetBSD 7.99.71(GENERIC) #0: Sun May 7 02:05:56 UTC 2017
       mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arc/amd64/compile/GENERIC
total memory = 3994 MB
avail memory = 3856 MB
WARNING: module error: module 'cd9660' pushed by boot loader already exists
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron 11-3162 (1.0.9)
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL)
ACPI: XSDT 0x000000007A671098 0000B4 (v01 DELL    WN09     01072009 AMI  00010013)
ACPI: FACP 0x000000007A67B948 00010C (v05 DELL    WN09     01072009 AMI  00010013)
ACPI BIOS Warning(bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfabt-642)
ACPI: DSDT 0x000000007A6711E0 00A764 (v02 DELL    WN09     01072009 INTL 20120913)
ACPI: FACS 0x000000007B54CE80 000040
ACPI: APIC 0x000000007A67BA58 000068 (v03 DELL    WN09     01072009 AMI  00010013)
ACPI: FPDT 0x000000007A67BAC0 000044 (v01 DELL    WN09     01072009 AMI  00010013)
ACPI: FIDT 0x000000007A67BB08 00009C (v01 DELL    WN09     01072009 AMI  00010013)
ACPI: MCFG 0x000000007A67BBA8 00003C (v01 DELL    WN09     01072009 MSFT 00000097)
ACPI: BOOT 0x000000007A67BBE8 000028 (v01 DELL    WN09     01072009 AMI  00010013)
ACPI: SLIC 0x000000007A67BC10 000176 (v01 DELL    WN09     01072009 AMI  00010013)
ACPI: HPET 0x000000007A67BD88 000038 (v01 DELL    WN09     01072009 AMI. 00000000)
ACPI: SSDT 0x000000007A67BDC0 000763 (v01 PmRef   CpuPm    00003000 INTL 20061109)
ACPI: SSDT 0x000000007A67C528 000290 (v01 PmRef   Cpu0Tst  00003000 INTL 20061109)
ACPI: SSDT 0x000000007A67C7B8 00017A (v01 PmRef   ApTst    00003000 INTL 20061109)
ACPI: UEFI 0x000000007A67C938 000042 (v01 DELL    WN09     00000000      00000000)
ACPI: MSDN 0x000000007A67C980 000055 (v03 DELL    WN09     01072009 AMI  00010013)
ACPI: LPIT 0x000000007A67C9D8 000104 (v01 DELL    WN09     00000005 MSFT 0100000D)
ACPI: TPM2 0x000000007A67CAE0 000034 (v03         Tmp2Tabl 00000001 AMI  00000000)
ACPI: CSRT 0x000000007A67CB18 00014C (v00 INTEL   LANFORDC 00000005 MSFT 0100000D)
ACPI: SSDT 0x000000007A67CC68 000544 (v01 CpuDpf  CpuDptf  00001000 INTL 20061109)
ACPI: SSDT 0x000000007A67D1B0 002230 (v01 DptfTb  DptfTab  00001000 INTL 20061109)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 115 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz,  id 0x406c4
cpu1 at mainbus0 apid 4
cpu0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz,  id 0x406c4
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <DELL    ,  WN09    ,01072009>, AsIId <AMI ,00010013>
acpi0: MCFG: segment 0,  bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81071D1010 0005F2 (v01 PmRef   Cpu0Ist  00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE817EE77810 0003A5 (v01 PmRef   Cpu0Cst  00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE817EEF2C10 00015F (v01 PmRef   ApIst    00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81071AE3F8 00008D (v01 PmRef   ApCst    00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000 - 0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC,  PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout8: brightness levels: [1-100]
acpiout9 at acpivga0 (ISP0, 0x22b8): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout8): Unknown Output Device, head0
acpivga0: 0x22b8 (acpiout9): Unknown Output Device, head0, non vga
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, DLLK0725) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2K, DLL0725) (aux port): irq 12
RMSC (PNP0C02) at acpi0 not configured
TPD1 (DLL0725) at acpi0 not configured
SPRC (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AMWB, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings
RBTN (DELLABCE) at acpi0 not configured
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
GPO3 (INT33FF) at acpi0 not configured
TPM (MSFT0101) at acpi0 not configured
DPTF (INT3400) at acpi0 not configured
STR3 (INT3403) at acpi0 not configured
STR1 (INT3403) at acpi0 not configured
STR6 (INT3403) at acpi0 not configured
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 89.0 C, passive cooling
ACPI: Enabled 6 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.2
pms0: Extended W mode, Palm detect, One button click pad, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus0: configration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2280 (rev. 0x35)
vga0 at pci0 dev 2 function 0: vendor 8086 product 22b1 (rev. 0x35)
wsdislay0 at vga0 kbdmux 1: console (88x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 8086 product 22dc (miscellaneous DASP, revision 0x35) at pci0 dev 11 function 0 not configured
sdhc0 at pci0 dev 16 function 0: vendor 8086 product 2294 (rev. 0x35)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 3.0, rev 16, SDMA, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 512 byte blocks
sdmmc0 at sdhc0 slot 0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 22b5 (rev. 0x35)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 2298 (miscellaneous crypto, revision 0x35) at pci0 dev 26 function 0 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0 interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0255
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2883
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/8ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 22c8 (rev.0x35)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at pb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
iwm0 at pci1 dev 0 function 0: vendor 8086 product 08b3 (rev. 0x83)
iwm0: Interrupting at msi2 vec0
pcib0 at pci0 dev 31 function 0: vendor 8086 product 229c (rev. 0x35)
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2292 (rev. 0x35)
ichsmb0 interrupting at ioapic0 pin 18
iic0 at ichsmb0: 12C bus
isa0 at picb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC Speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat    1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  500 us, pow    10 mW
acpicpu0: C3: FFH, lat 1000 us, pow    10 mW
acpicpu0: P0: FFH, lat   10 us, pow  2000 mW, 1601 MHz, turbo boost
acpicpu0: P1: FFH, lat   10 us, pow  2000 mW, 1600 MHz
acpicpu0: P2: FFH, lat   10 us, pow  1900 mW, 1520 MHz
acpicpu0: P3: FFH, lat   10 us, pow  1800 mW, 1440 MHz
acpicpu0: P4: FFH, lat   10 us, pow  1700 mW, 1360 MHz
acpicpu0: P5: FFH, lat   10 us, pow  1600 mW, 1280 MHz
acpicpu0: P6: FFH, lat   10 us, pow  1500 mW, 1200 MHz
acpicpu0: P7: FFH, lat   10 us, pow  1400 mW, 1120 MHz
acpicpu0: P8: FFH, lat   10 us, pow  1300 mW, 1040 MHz
acpicpu0: P9: FFH, lat   10 us, pow  1200 mW,  960 MHz
acpicpu0: P10: FFH, lat   10 us, pow  1100 mW,  880 MHz
acpicpu0: P11: FFH, lat   10 us, pow  1000 mW,  800 MHz
acpicpu0: P12: FFH, lat   10 us, pow   900 mW,  720 MHz
acpicpu0: T0: FFH, lat    1 us, pow   900 mW,  100 %
acpicpu0: T1: FFH, lat    1 us, pow   787 mW,   88 %
acpicpu0: T2: FFH, lat    1 us, pow   675 mW,   75 %
acpicpu0: T3: FFH, lat    1 us, pow   562 mW,   63 %
acpicpu0: T4: FFH, lat    1 us, pow   450 mW,   50 %
acpicpu0: T5: FFH, lat    1 us, pow   337 mW,   38 %
acpicpu0: T6: FFH, lat    1 us, pow   225 mW,   25 %
acpicpu0: T7: FFH, lat    1 us, pow   112 mW,   13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 100 Hz quality 3000
uhub at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, adr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, adr 0
uhub1: 7 ports with 7 removable, self powered
acpiacad0: AC adapter online
IPsec:  Initialized Security Associtation Processing.
sdhc0: timeout waiting for mask 0x3 value 0 (state=0x1fff0a06)
sdhc0: command or data phase inhibited
sdhc0: tuning did not complete, using fixed sampling clock
admmc0: can't execute MMC tuning
sdmmc0: mem init failed
ld0 at sdmmc0: <0x90:0x014a:HBG4e^E:0x00;0x50a1952:0x000>
ld0: 29824 MB, 7574 cyl, 128 head, 63 sec, 512 bytes/sect x 61079552 sectors
ld0: GPT GUID: 41eceadd-c2d7-4d58-98c0-f45017d6e439
dk0 at ld0: "EFI system partition", 1024000 blocks at 2040, type: msdos
dk1 at ld0: "Microsoft reserved partition", 262144 blocks at 1026048, type: <unknown>
dk2 at ld0: "Basic data partition", 58859520 blocks at 1288192, type: <unknown>
dk3 at ld0: "53f33d20-f61d-498a-ba9b-f8a26d49726c", 927744 blocks at 60147712, type <unknown>
ld0: 4-bit width, HS200, 200.000 MHz
axen0 0 at uhub0 port 1
axen0: ASIX Elec. Corp. (0xb95) AX88179 (0x1790), rev 3.00/1.00 addr 1
umass0 at uhub1 port2 configuration 1 interface 0
umass0: BUFFALO (0x411) BUFFALO Optical Drive (0x29f), rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun par target
cd0 at scsibus0 target 0 lun 0: <BUFFALO, Optical Drive, BFT6> cdrom removable
axen0: AX88179
axen0: Ethernet address 34:3d:c4:9a:4f:5e
rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ubt0 at uhub1 port 3
ubt: vendor 8087 (0x8087) product 07dc (0x7dc), rev 2.00/1.00, addr 3
uvideo0 at uhub1 port 5 configuration 1 interface 0: 1234567890-AU18 (0xc45) Integrated_Webcam_HD (0x6a05), rev 2.00/61.11, addr 4
video0 at uvideo0: 1234567890-AU18 (0xc45) Integrated_Webcam_HD (0x6a05), rev 2.00/61.11, addr 4
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 13 errors while detecting hardwhare: check system log.
boot device: cd0
root on cd0a dumps on cd0b
root file system type: cd9660
kern.module.path=/stand/amd64/7.99.71/modules
iwm0: hw rev 0x160, fw var 17.352738.0, address f4:06:69:a5:c0:f8
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
acpibat0: normal capacity on 'charge state'
P.S English is not my native language; please excuse typing, grammar or/and word selecting errors.

Last edited by tmaekawa; 22nd May 2017 at 08:54 AM.
Reply With Quote
Reply

Tags
emmc, head

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tmux basic fcns not working; Dell Inspiron, OpenBSD 5.4 spacebar_permissions OpenBSD General 5 24th November 2013 02:52 AM
floppy-based installation on Dell without cdrom .. ? daemonfowl OpenBSD Installation and Upgrading 11 27th July 2012 12:11 AM
Dell Inspiron 1525 - OpenBSD Scott7 OpenBSD General 7 26th March 2011 02:55 AM
NetBSD on Dell Inspiron 5150 kdu NetBSD Installation and Upgrading 5 10th June 2009 01:12 AM
OpenBSD 4.4/4.5 i386 installation on Dell Inspiron 6400 notebook. xixobrax OpenBSD Installation and Upgrading 12 30th April 2009 04:34 AM


All times are GMT. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick