|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
||||
Keyboard layout lost after upgrade to -current
Hello people,it's been a while and after a lot of testing and experimenting with OpenBSD i decided to "move" to -currnet.
Today i upgraded from -stable to -current following this post: http://www.daemonforums.org/private....owpm&pmid=7209 Everything works fine so far,but after upgrading i don't have the second layout.(I have the us and the Greek layout.) Is there a setting i must do after upgrading to have again the Second Layout? Edit: The sysmerge command was changed accordingly to the OpenBSD 5 -cuurrent that i wanted to move so it was like: Code:
sysmerge -s ftp://ftp.cc.uoc.gr/mirrors/OpenBSD/snapshots/i386/etc50.tgz -x ftp://ftp.cc.uoc.gr/mirrors/OpenBSD/snapshots/i386//xetc50.tgz Last edited by sepuku; 21st September 2011 at 11:52 PM. |
|
||||
If you review the Following -current FAQ, you will find this entry from 2 June, 2011.
|
|
||||
Hello jggimi,
The entry you posted leads to this guide: http://www.x.org/releases/X11R7.6/do...html#id2548546 So far I gave: Code:
rm -rf /etc/X11/xkb Is : Code:
Section "InputClass" Identifier "keyboard defaults" MatchIsKeyboard "on" Option "XkbModel" "pc104" Option "XkbLayout" "us,gr" Option "XKbOptions" "grp:ctrl_alt_toggle" EndSection http://www.daemonforums.org/showthread.php?t=6127 Also i'm wondering what to put in 'XkbModel'. My dmesg is this: Code:
$ dmesg at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)1 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S,CX16,xTPR,PDCM cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)1 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S,CX16,xTPR,PDCM cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-cla1 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM,CX16,xTPR,PDCM ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P2) acpiprt2 at acpi0: bus 5 (P0P1) acpiprt3 at acpi0: bus -1 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus 3 (P0P8) acpiprt7 at acpi0: bus 2 (P0P9) acpiprt8 at acpi0: bus 4 (P0P4) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0xcc00 0xcd000/0x3000! cpu0: Enhanced SpeedStep 2406 MHz: speeds: 2394, 1596 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8500 GT" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi azalia0: codecs: Realtek ALC883 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 pci3 at ppb2 bus 3 jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03 ahci0 at jmb0: apic 4 int 16, AHCI 1.0 scsibus0 at ahci0: 32 targets pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to natiCI pciide0: using apic 4 int 16 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD RW AD-7203A, 1.01> ATAPI 5/cdromovable atapiscsi1 at pciide0 channel 0 drive 1 scsibus2 at atapiscsi1: 2 targets cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-H30N, 1.00> ATAPI 5/cdremovable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 int 16 pci4 at ppb3 bus 2 age0 at pci4 dev 0 function 0 "Attansic Technology L1" rev 0xb0: msi, addres:1d:60:cb:09:62 atphy0 at age0 phy 0: F1 10/100/1000 PHY, rev. 5 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci5 at ppb4 bus 5 "VIA VT6306 FireWire" rev 0xc0 at pci5 dev 3 function 0 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02: PM disabled pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channelonfigured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 4 int 22 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <ST3250410AS> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 wd1 at pciide1 channel 1 drive 0: <ST3250410AS> wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channelired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 4 int 22 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 lm1 at wbsio0 port 0x290/8: W83627DHG npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec mtrr: Pentium Pro MTRR support umass0 at uhub0 port 4 configuration 1 interface 0 "Western Digital My Book" 2.00/1.65 addr 2 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd0 at scsibus3 targ 1 lun 0: <WD, 7500AAC External, 1.65> SCSI2 0/direct fiserial.10581100303231343039 sd0: 715404MB, 512 bytes/sector, 1465149168 sectors uhidev0 at uhub4 port 1 configuration 1 interface 0 "Plus More Enterprise LTSB-compliant keyboard" rev 1.10/1.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 "Plus More Enterprise LTSB-compliant keyboard" rev 1.10/1.00 addr 2 uhidev1: iclass 3/1, 3 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 ums0 at uhidev1 reportid 3: 0 button, Z dir wsmouse0 at ums0 mux 0 uhidev2 at uhub4 port 2 configuration 1 interface 0 "Microsoft Microsoft 3-Bn Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3 uhidev2: iclass 3/1 ums1 at uhidev2: 3 buttons, Z dir wsmouse1 at ums1 mux 0 vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets root on wd0a (49d84e9ba0acc96a.a) swap on wd0b dump on wd0b syncing disks... OpenBSD 5.0-current (GENERIC.MP) #67: Tue Sep 13 22:12:54 MDT 2011 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)1 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S,CX16,xTPR,PDCM real mem = 3220238336 (3071MB) avail mem = 3157487616 (3011MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/03/07, BIOS32 rev. 0 @ 0xf0010, SMBrev. 2.4 @ 0xf06e0 (71 entries) bios0: vendor American Megatrends Inc. version "0603" date 07/03/2007 bios0: ASUSTeK Computer INC. P5K acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) EUSB(S4) USBE(S4) (S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4)4(S4) USB5(S4) USB6(S4) P0P4(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 267MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)1 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S,CX16,xTPR,PDCM cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)1 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S,CX16,xTPR,PDCM cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)1 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S,CX16,xTPR,PDCM ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P2) acpiprt2 at acpi0: bus 5 (P0P1) acpiprt3 at acpi0: bus -1 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus 3 (P0P8) acpiprt7 at acpi0: bus 2 (P0P9) acpiprt8 at acpi0: bus 4 (P0P4) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0xcc00 0xcd000/0x3000! cpu0: Enhanced SpeedStep 2406 MHz: speeds: 2394, 1596 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8500 GT" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi azalia0: codecs: Realtek ALC883 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 pci3 at ppb2 bus 3 jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03 ahci0 at jmb0: apic 4 int 16, AHCI 1.0 scsibus0 at ahci0: 32 targets pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to natiCI pciide0: using apic 4 int 16 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD RW AD-7203A, 1.01> ATAPI 5/cdromovable atapiscsi1 at pciide0 channel 0 drive 1 scsibus2 at atapiscsi1: 2 targets cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-H30N, 1.00> ATAPI 5/cdremovable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4 int 16 pci4 at ppb3 bus 2 age0 at pci4 dev 0 function 0 "Attansic Technology L1" rev 0xb0: msi, addres:1d:60:cb:09:62 atphy0 at age0 phy 0: F1 10/100/1000 PHY, rev. 5 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci5 at ppb4 bus 5 "VIA VT6306 FireWire" rev 0xc0 at pci5 dev 3 function 0 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02: PM disabled pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channelonfigured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 4 int 22 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <ST3250410AS> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 wd1 at pciide1 channel 1 drive 0: <ST3250410AS> wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channelired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 4 int 22 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 lm1 at wbsio0 port 0x290/8: W83627DHG npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec mtrr: Pentium Pro MTRR support umass0 at uhub0 port 4 configuration 1 interface 0 "Western Digital My Book" 2.00/1.65 addr 2 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd0 at scsibus3 targ 1 lun 0: <WD, 7500AAC External, 1.65> SCSI2 0/direct fiserial.10581100303231343039 sd0: 715404MB, 512 bytes/sector, 1465149168 sectors uhidev0 at uhub4 port 1 configuration 1 interface 0 "Plus More Enterprise LTSB-compliant keyboard" rev 1.10/1.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 "Plus More Enterprise LTSB-compliant keyboard" rev 1.10/1.00 addr 2 uhidev1: iclass 3/1, 3 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 ums0 at uhidev1 reportid 3: 0 button, Z dir wsmouse0 at ums0 mux 0 uhidev2 at uhub4 port 2 configuration 1 interface 0 "Microsoft Microsoft 3-Bn Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3 uhidev2: iclass 3/1 ums1 at uhidev2: 3 buttons, Z dir wsmouse1 at ums1 mux 0 vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets root on wd0a (49d84e9ba0acc96a.a) swap on wd0b dump on wd0b I think it shouldbe 'pckbc' but i'm not sure and i'm afraid i will lose system stability if i do random things and that's why i'm asking. If you want me to provide any additional info please let me know, Thanx in advance. |
|
||||
Quote:
If not a shame,sure it's a pity that there is NO clear guidance from OpenBSD people on how to add layouts.In every section of the FAQ they go so deep and add every detail that i can't stop wondering why not include something like that...even for a -current it's important to at least have some basic things... Just upgrade and there you go...You don't even have the ability to write on your language. |
|
|||
Quote:
Good luck in your search. |
|
||||
Quote:
I don't think that my experience and OpenBSD knowledge so far is enough to to write an addendum even if i finally manage to make it work.Yet this is a later thought.So i 'll concentrate to finding a solution for now. |
|
||||
Fixed.Just in case someone deals with the same problem that's what i did. :
According to: http://www.openbsd.org/faq/current.html#20110602 1) Code:
rm -rf /etc/X11/xkb Code:
rm /etc/X11/xorg.conf 3) Code:
vi /etc/X11/xorg.conf.d/90-default-kbd.conf Code:
Section "InputClass" Identifier "keyboard defaults" MatchIsKeyboard "on" Option "XkbModel" "pc105" Option "XkbLayout" "us,gr" Option "XKbOptions" "grp:ctrl_alt_toggle,terminate:ctrl_alt_bksp" EndSection Reboot and that's all. Also before i set the file i was able to have both layouts using this command: Code:
setxkbmap -model pc105 -layout "us,gr" -option "grp:ctrl_alt_toggle" |
|
|||
I don't believe OpenBSD's Xenocara has xorg.conf.d yet, so that part is unnecessary AFAIK.
|
|
||||
That's true.That's why i created one. :-P But i disagree; it is necessary since it's the only (known to me as i speak for myself) way so far to add a keyboard layout.I you have a better suggestion that works i would be glad to see it written here and try it. |
|
|||
Add it to xorg.conf?
|
|
||||
From the first link that jggimi gave me:
"If you have an /etc/X11/xorg.conf file that exists mainly to set keyboard type and nationality that file should be removed, otherwise you may find yourself without keyboard functionality in X. " I have removed that file a shown to "following -current" section. |
|
|||
In -current, the wscons infrastructure for X added auto configuration, you can still do manual xorg.conf configuration but you need to add Option "AutoAddDevices" "False" to the "ServerFlags" section.
They're trying to make it easier to run without an xorg.conf, but you still can. |
|
||||
Quote:
|
|
|||
Xorg is migrating the configuration to files inside xorg.conf.d, I simply meant you could use the traditional xorg.conf configuration method.
If you prefer to use the other method, that's fine, but I was simply stating you can still use a single xorg.conf config file, which IMHO is easier to maintain. |
|
||||
Well,i don't think that the contents of the new file have great differences compared to the old xorg .conf file.At least with everything that has to do with the layouts.Which is easier and more comfortable lays under someone's opinion.On the other hand it's a change that sooner or later will work only that way if i got it right and please correct me if i'm wrong.
|
|
|||
No, I don't believe they'll be phasing out xorg.conf anytime soon.
Even if upstream eventually does, I'm not convinced OpenBSD's Xenocara fork will follow suit. |
|
|||
OpenBSD FAQ refers to xorg.conf.d? I don't believe that is true.
Last edited by BSDfan666; 23rd September 2011 at 07:53 PM. |
Tags |
adding keyboard layouts, greek layout, openbsd5 snapshot |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about xenocara update and keyboard layout | Daffy | OpenBSD Installation and Upgrading | 0 | 17th July 2011 11:35 AM |
Keyboard Layout not included in encoding of wsksymdef.h | sepuku | OpenBSD General | 8 | 4th July 2011 06:29 PM |
NetBSD 5 keyboard layout in gnome | jaideep_jdof | NetBSD Package System (pkgsrc) | 1 | 17th September 2009 03:50 PM |
Can not change keyboard layout with SHIFT and Alt after VNCviewer connect | mfaridi | OpenBSD General | 1 | 13th December 2008 03:14 PM |
Keyboard Layout | mfaridi | FreeBSD General | 6 | 26th June 2008 07:13 PM |