DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD General

NetBSD General Other questions regarding NetBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 8th May 2016
darktrym's Avatar
darktrym darktrym is offline
standard-bearer
 
Join Date: Feb 2011
Location: Düsseldorf
Posts: 106
Default Nouveau on NetBSD

With the new DRM stack came Nouveau. For a very long time you could only build this driver but the kernel crash when you get access to the hardware. Now there are some positive feedbacks on the mailinglist.

Is there a list what architectures are supported? And from supported models which i can use 3d, suspend etc? Are the Gallium drivers in a good shape?
Is there an overview like FreeBSDs wiki page that identify supported hardware and features?

I think they forked Linux DRM subsystem 3.14 with some parts of later versions(i.e. 3.16).
Reply With Quote
  #2   (View Single Post)  
Old 10th May 2016
catbsd catbsd is offline
New User
 
Join Date: May 2016
Posts: 2
Default

Hi,

I'm using nVidia GTX 770 with nouveau with NetBSD-current, where it is enabled by default.
You can grab it built from here: http://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/ - there is no need to build your own.

> Is there a list what architectures are supported?

Currently enabled for amd64 and i386.

> And from supported models which i can use 3d, suspend etc?

3D seems to work, but I have not used it extensively - only played a game for some hours.

Not sure about suspend with nouveau specifically.

> Is there an overview like FreeBSDs wiki page that identify supported hardware and features?

Should work for everything up to GTX 700 series, and some of 700 series too.
However that's a purely theoretical list - there may be bugs with some devices.
if I had to buy a device, I will go over what people have successfully used.

Recent problem fixes (last few months):
- Base Xorg now includes nouveau driver, so pkgsrc Xorg is not needed
- Most devices panic at boot (fixed in April 15 2016)
- Occasional panic every few days in all DRM drivers

As a result of these problem fixes (especially the second one), nouveau has been re-enabled by default (Apr 20) in NetBSD-current, and will likely be included in NetBSD-7.1.

Remaining issues for me:
- inability to see console with nouveau driver enabled. this is possibly related to using analog output, which is not very common today.
- need a patch to see any output, it will be committed soon so I will not share it. most devices do not experience this problem.

In the absence of nouveau support, old base Xorg with vesa driver on recent nVidia devices appears very slow.
pkgsrc Xorg (latest version of Xorg) is OK for use, but experiences the same slowness when closed, so shutdown is extremely slow.

Note that drivers can be easily disabled in the boot loader, drop to boot prompt and type: userconf disable nouveau*, then boot.

Last edited by catbsd; 10th May 2016 at 02:42 AM.
Reply With Quote
  #3   (View Single Post)  
Old 12th May 2016
darktrym's Avatar
darktrym darktrym is offline
standard-bearer
 
Join Date: Feb 2011
Location: Düsseldorf
Posts: 106
Default

I already know the links for the daily builds, i using these since 4.00beta2. But NetBSD often lacking on information what hardware is supported. If someone ask me, i can say nothing more than read the man page, source code or try it out. I also try to trace the changes on support on wireless drivers on wikipedia.
And here we have a overhauled subsystem, currently only NetBSD has Nouveau in BSD-Family. When i look on the status matrix of the nouveau project i can see the progress and supporting of the most hardware. Dragonfly should have the newest version of DRI2. I hope NetBSD can faster update his wrapper layer for the Linux DRM subsystem.
Reply With Quote
  #4   (View Single Post)  
Old 8th November 2018
BSD_user BSD_user is offline
New User
 
Join Date: Oct 2018
Posts: 3
Default

I'm sorry, but I also am interested in Nouveau on NetBSD.

I bought a new PC and installed NetBSD 8.0 (GENERIC). However the launch of X fails.I watched this link and installed packages below.
/usr/pkgsrc/x11/modular-xorg-server
/usr/pkgsrc/meta-pkgs/modular-xorg-apps
/usr/pkgsrc/meta-pkgs/modular-xorg-fonts
/usr/pkgsrc/x11/xf86-input-keyboard
/usr/pkgsrc/x11/xf86-input-mouse
/usr/pkgsrc/x11/xf86-video-nouveau
And I write the line "X11_TYPE=modular" on /etc/mk.conf, but the launch of X fails. The version of nouveau is 1.0.15. The log in "/var/log/Xorg.0.log" is below.
Quote:
[ 331.488]
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[ 331.488] Build Operating System: NetBSD-8.0-x86_64 The NetBSD Foundation
[ 331.488] Current Operating System: NetBSD localhost 8.0 NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 331.489] Build Date: 16 October 2018 02:20:30AM
[ 331.489]
[ 331.489] Current version of pixman: 0.34.0
[ 331.489] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 331.489] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 331.489] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 24 20:48:38 2018
[ 331.489] (++) Using config file: "/root/xorg.conf.new.01"
[ 331.489] (==) ServerLayout "X.org Configured"
[ 331.489] (**) |-->Screen "Screen0" (0)
[ 331.489] (**) | |-->Monitor "Monitor0"
[ 331.489] (**) | |-->Device "Card0"
[ 331.489] (**) |-->Input Device "Mouse0"
[ 331.489] (**) |-->Input Device "Keyboard0"
[ 331.489] (==) Not automatically adding devices
[ 331.489] (==) Not automatically enabling devices
[ 331.489] (==) Not automatically adding GPU devices
[ 331.489] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 331.489] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
[ 331.489] Entry deleted from font path.
[ 331.489] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
[ 331.489] Entry deleted from font path.
[ 331.489] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
[ 331.489] Entry deleted from font path.
[ 331.489] (**) FontPath set to:
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi,
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi
[ 331.489] (**) ModulePath set to "/usr/pkg/lib/xorg/modules"
[ 331.489] (II) Loader magic: 0x7f75a0
[ 331.489] (II) Module ABI versions:
[ 331.489] X.Org ANSI C Emulation: 0.4
[ 331.489] X.Org Video Driver: 24.0
[ 331.489] X.Org XInput driver : 24.1
[ 331.489] X.Org Server Extension : 10.0
[ 331.495] (--) PCI:*(1@1:0:0) 10de:1c20:1b0a:22be rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 331.495] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 331.495] (II) LoadModule: "glx"
[ 331.495] (II) Loading /usr/pkg/lib/xorg/modules/extensions/libglx.so
[ 331.506] (II) Module glx: vendor="X.Org Foundation"
[ 331.506] compiled for 1.20.1, module version = 1.0.0
[ 331.506] ABI class: X.Org Server Extension, version 10.0
[ 331.507] (II) LoadModule: "nouveau"
[ 331.507] (II) Loading /usr/pkg/lib/xorg/modules/drivers/nouveau_drv.so
[ 331.507] (II) Module nouveau: vendor="X.Org Foundation"
[ 331.507] compiled for 1.20.1, module version = 1.0.15
[ 331.507] Module class: X.Org Video Driver
[ 331.507] ABI class: X.Org Video Driver, version 24.0
[ 331.507] (II) LoadModule: "mouse"
[ 331.507] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
[ 331.508] (II) Module mouse: vendor="X.Org Foundation"
[ 331.508] compiled for 1.20.1, module version = 1.9.3
[ 331.508] Module class: X.Org XInput Driver
[ 331.508] ABI class: X.Org XInput driver, version 24.1
[ 331.508] (II) LoadModule: "kbd"
[ 331.508] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so
[ 331.508] (II) Module kbd: vendor="X.Org Foundation"
[ 331.508] compiled for 1.20.1, module version = 1.9.0
[ 331.508] Module class: X.Org XInput Driver
[ 331.508] ABI class: X.Org XInput driver, version 24.1
[ 331.508] (II) NOUVEAU driver Date: Fri Apr 21 14:41:17 2017 -0400
[ 331.508] (II) NOUVEAU driver for NVIDIA chipset families :
[ 331.508] RIVA TNT (NV04)
[ 331.508] RIVA TNT2 (NV05)
[ 331.508] GeForce 256 (NV10)
[ 331.508] GeForce 2 (NV11, NV15)
[ 331.508] GeForce 4MX (NV17, NV18)
[ 331.508] GeForce 3 (NV20)
[ 331.508] GeForce 4Ti (NV25, NV28)
[ 331.508] GeForce FX (NV3x)
[ 331.508] GeForce 6 (NV4x)
[ 331.508] GeForce 7 (G7x)
[ 331.508] GeForce 8 (G8x)
[ 331.508] GeForce GTX 200 (NVA0)
[ 331.508] GeForce GTX 400 (NVC0)
[ 331.508] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 331.545] (EE) No devices detected.
[ 331.545] (EE)
Fatal server error:
[ 331.545] (EE) no screens found(EE)
[ 331.545] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 331.545] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 331.545] (EE)
[ 331.574] (EE) Server terminated with error (1). Closing log file.
I can launch X on the same PC with OpenSUSE Leap 15.0 and nouveau of the version 1.0.15. If someone has any suggestion, please teach me.

The specification of my PC is below.
CPU: Intel Core i7-8700T
memory: DDR4-2666 (PC4-21300) DDR4 SO-DIMM 8GB
graphics: NVIDIA GeForce GTX 1060
display: ProLite E2008HDS (iiyama)
Reply With Quote
  #5   (View Single Post)  
Old 8th November 2018
shep shep is offline
Real Name: Scott
Rc.conf Instructor
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 1,191
Default

The code for nouveau(4) appeared in NetBSD 7 but was not enabled in the default kernel.
https://nouveau.freedesktop.org/wiki/NetBSD/

My quick scan of the NetBSD 8 release announcement did not show that it was enabled in the default kernel - I suspect you will need to build a kernel with nouveau enabled.
Reply With Quote
  #6   (View Single Post)  
Old 4 Weeks Ago
Sensucht94's Avatar
Sensucht94 Sensucht94 is offline
Real Name: Paolo Vincenzo Olivo
Port Guard
 
Join Date: Oct 2017
Location: Rome
Posts: 42
Default

Quote:
Originally Posted by shep View Post
The code for nouveau(4) appeared in NetBSD 7 but was not enabled in the default kernel.
https://nouveau.freedesktop.org/wiki/NetBSD/

My quick scan of the NetBSD 8 release announcement did not show that it was enabled in the default kernel - I suspect you will need to build a kernel with nouveau enabled.
Sorry for stepping in between, but that's untrue; nouveau is enabled by default in 8.0 and support covers up to 9xx series. I run it on Nvidia NVA8 G105M, and I pen friend of mine has it running shamelessly on Nvidia Geforce 760. It supports high res framebuffer console, dual monitor, and allows gaming (tested 0ad, supertuxkart, ioquake3 and others) with good performance. HEAD's KMS/DRM driver version is currently is from Linux 4.4, so I wonder if it's support Pascal/10xx series too.



% glxinfo | grep -i opengl
Code:
OpenGL renderer string: Gallium 0.4 on NVA8
OpenGL version string: 2.1 Mesa 10.3.5
OpenGL shading language version string: 1.30
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 2.0 Mesa 10.3.5
__________________
Be the change you want to see in the World
Reply With Quote
  #7   (View Single Post)  
Old 4 Weeks Ago
Sensucht94's Avatar
Sensucht94 Sensucht94 is offline
Real Name: Paolo Vincenzo Olivo
Port Guard
 
Join Date: Oct 2017
Location: Rome
Posts: 42
Default

Given the log you provided, It doesn't look like Xorg is failing to load NOUVEAU, it's possible the problem lays somewhere else. What's in your ~/.xinitrc? Also, I'm by no means a modular-xorg expert as I'm used to extract x* binary sets too and just rely on the X version found in base

EDIT: If you have high-resolution framebuffer console on wscons tty0 (do you?), then nouveau was currently loaded at boot and should not be the problem, providing xf86-video-nouveau is installed; if you have low-res raw-grained wscons, then there's high chance your GPU is still not supported by 8.0 (what does /var/log/messages say in regard of nouveau?), but you may have better luck with -current branch.

Optimus is not supported yet
__________________
Be the change you want to see in the World

Last edited by Sensucht94; 4 Weeks Ago at 02:04 PM.
Reply With Quote
  #8   (View Single Post)  
Old 1 Week Ago
BSD_user BSD_user is offline
New User
 
Join Date: Oct 2018
Posts: 3
Default

shep and Sensucht94, thank you for replying my post.

Sensucht94, I don't have ~/.xinitrc yet. I did
# X -config ~/xorg.conf.new
described in the Guide.

Now, I booted NetBSD and logined on the root accound. And did the commands.
# X -configure
# X -config /root/xorg.conf.new

/var/log/messages is below.
Quote:
Dec 3 23:00:32 localhost syslogd[287]: restart
Dec 3 23:00:32 localhost /netbsd: Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
Dec 3 23:00:32 localhost /netbsd: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
Dec 3 23:00:32 localhost /netbsd: 2018 The NetBSD Foundation, Inc. All rights reserved.
Dec 3 23:00:32 localhost /netbsd: Copyright (c) 1982, 1986, 1989, 1991, 1993
Dec 3 23:00:32 localhost /netbsd: The Regents of the University of California. All rights reserved.
Dec 3 23:00:32 localhost /netbsd:
Dec 3 23:00:32 localhost /netbsd: NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
Dec 3 23:00:32 localhost /netbsd: mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
Dec 3 23:00:32 localhost /netbsd: total memory = 16321 MB
Dec 3 23:00:32 localhost /netbsd: avail memory = 15822 MB
Dec 3 23:00:32 localhost /netbsd: cpu_rng: RDSEED
Dec 3 23:00:32 localhost /netbsd: timecounter: Timecounters tick every 10.000 msec
Dec 3 23:00:32 localhost /netbsd: Kernelized RAIDframe activated
Dec 3 23:00:32 localhost /netbsd: running cgd selftest aes-xts-256 aes-xts-512 done
Dec 3 23:00:32 localhost /netbsd: timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dec 3 23:00:32 localhost /netbsd: efi: systbl at pa 8f703018
Dec 3 23:00:32 localhost /netbsd: To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
Dec 3 23:00:32 localhost /netbsd: mainbus0 (root)
Dec 3 23:00:32 localhost /netbsd: ACPI: RSDP 0x000000008EBAA000 000024 (v02 ALASKA)
Dec 3 23:00:32 localhost /netbsd: ACPI: XSDT 0x000000008EBAA0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI: FACP 0x000000008EBCCF20 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI: DSDT 0x000000008EBAA208 022D13 (v02 ALASKA A M I 01072009 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: FACS 0x000000008EC14F00 000040
Dec 3 23:00:32 localhost /netbsd: ACPI: APIC 0x000000008EBCD038 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI: FPDT 0x000000008EBCD130 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI: FIDT 0x000000008EBCD178 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI: MCFG 0x000000008EBCD218 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBCD258 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: AAFT 0x000000008EBCD600 00023B (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBCD840 003156 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBD0998 0024C8 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: HPET 0x000000008EBD2E60 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBD2E98 000A21 (v02 INTEL xh_kbl_s 00000000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: UEFI 0x000000008EBD38C0 000042 (v01 ALASKA A M I 00000002 01000013)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBD3908 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: LPIT 0x000000008EBD50B8 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBD5150 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0x000000008EBD5298 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: DBGP 0x000000008EBD57B0 000034 (v01 INTEL 00000002 MSFT 0000005F)
Dec 3 23:00:32 localhost /netbsd: ACPI: DBG2 0x000000008EBD57E8 000054 (v00 INTEL 00000002 MSFT 0000005F)
Dec 3 23:00:32 localhost /netbsd: ACPI: DMAR 0x000000008EBD5840 000070 (v01 INTEL KBL 00000001 INTL 00000001)
Dec 3 23:00:32 localhost /netbsd: ACPI: BGRT 0x000000008EBD58B0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI: WSMT 0x000000008EBD58E8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 3 23:00:32 localhost /netbsd: ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170303/dswload2-202)
Dec 3 23:00:32 localhost /netbsd: ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170303/psobject-252)
Dec 3 23:00:32 localhost /netbsd: ACPI Error: Method parse/execution failed [\_SB.PCI0.RP04.PXSX] (Node 0xfffffe846ab01638), AE_NOT_FOUND (20170303/psparse-560)
Dec 3 23:00:32 localhost /netbsd: ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170303/dswload2-202)
Dec 3 23:00:32 localhost /netbsd: ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170303/psobject-252)
Dec 3 23:00:32 localhost /netbsd: ACPI Error: Method parse/execution failed [\_SB.PCI0.RP08.PXSX] (Node 0xfffffe846aaffdf0), AE_NOT_FOUND (20170303/psparse-560)
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 39 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 4 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 2 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost syslogd[287]: last message repeated 2 times
Dec 3 23:00:32 localhost /netbsd: ACPI: 8 ACPI AML tables successfully acquired and loaded
Dec 3 23:00:32 localhost /netbsd: ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
Dec 3 23:00:32 localhost /netbsd: cpu0 at mainbus0 apid 0
Dec 3 23:00:32 localhost /netbsd: cpu0: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu0: package 0, core 0, smt 0
Dec 3 23:00:32 localhost /netbsd: cpu1 at mainbus0 apid 2
Dec 3 23:00:32 localhost /netbsd: cpu1: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu1: package 0, core 1, smt 0
Dec 3 23:00:32 localhost /netbsd: cpu2 at mainbus0 apid 4
Dec 3 23:00:32 localhost /netbsd: cpu2: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu2: package 0, core 2, smt 0
Dec 3 23:00:32 localhost /netbsd: cpu3 at mainbus0 apid 6
Dec 3 23:00:32 localhost /netbsd: cpu3: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu3: package 0, core 3, smt 0
Dec 3 23:00:32 localhost /netbsd: cpu4 at mainbus0 apid 8
Dec 3 23:00:32 localhost /netbsd: cpu4: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu4: package 0, core 4, smt 0
Dec 3 23:00:32 localhost /netbsd: cpu5 at mainbus0 apid 10
Dec 3 23:00:32 localhost /netbsd: cpu5: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu5: package 0, core 5, smt 0
Dec 3 23:00:32 localhost /netbsd: cpu6 at mainbus0 apid 1
Dec 3 23:00:32 localhost /netbsd: cpu6: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu6: package 0, core 0, smt 1
Dec 3 23:00:32 localhost /netbsd: cpu7 at mainbus0 apid 3
Dec 3 23:00:32 localhost /netbsd: cpu7: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu7: package 0, core 1, smt 1
Dec 3 23:00:32 localhost /netbsd: cpu8 at mainbus0 apid 5
Dec 3 23:00:32 localhost /netbsd: cpu8: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu8: package 0, core 2, smt 1
Dec 3 23:00:32 localhost /netbsd: cpu9 at mainbus0 apid 7
Dec 3 23:00:32 localhost /netbsd: cpu9: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu9: package 0, core 3, smt 1
Dec 3 23:00:32 localhost /netbsd: cpu10 at mainbus0 apid 9
Dec 3 23:00:32 localhost /netbsd: cpu10: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu10: package 0, core 4, smt 1
Dec 3 23:00:32 localhost /netbsd: cpu11 at mainbus0 apid 11
Dec 3 23:00:32 localhost /netbsd: cpu11: Intel(R) Core(TM) i7-8700T CPU @ 2.40GHz, id 0x906ea
Dec 3 23:00:32 localhost /netbsd: cpu11: package 0, core 5, smt 1
Dec 3 23:00:32 localhost /netbsd: acpi0 at mainbus0: Intel ACPICA 20170303
Dec 3 23:00:32 localhost /netbsd: acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
Dec 3 23:00:32 localhost /netbsd: acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
Dec 3 23:00:32 localhost /netbsd: ACPI: Dynamic OEM Table Load:
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0xFFFFFE846AB30808 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Dynamic OEM Table Load:
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0xFFFFFE846AB30008 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Dynamic OEM Table Load:
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0xFFFFFE811D58A008 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: ACPI: Dynamic OEM Table Load:
Dec 3 23:00:32 localhost /netbsd: ACPI: SSDT 0xFFFFFE846AAA3808 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
Dec 3 23:00:32 localhost /netbsd: ACPI: Executed 1 blocks of module-level executable AML code
Dec 3 23:00:32 localhost /netbsd: acpi0: SCI interrupting at int 9
Dec 3 23:00:32 localhost /netbsd: timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
Dec 3 23:00:32 localhost /netbsd: hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
Dec 3 23:00:32 localhost /netbsd: timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
Dec 3 23:00:32 localhost /netbsd: acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
Dec 3 23:00:32 localhost /netbsd: SIO1 (PNP0C02) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: FWHD (INT0800) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: LDRC (PNP0C02) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: LDR2 (PNP0C02) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
Dec 3 23:00:32 localhost /netbsd: CWDT (INT3F0D) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: PDRC (PNP0C02) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: IOTR (PNP0C02) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
Dec 3 23:00:32 localhost /netbsd: acpibat0: -Virtual Battery 0- Fake rechargeable battery
Dec 3 23:00:32 localhost /netbsd: acpibat0: granularity: low->warn 0.100 Wh, warn->full 0.100 Wh
Dec 3 23:00:32 localhost /netbsd: acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
Dec 3 23:00:32 localhost /netbsd: PEPD (INT33A1) at acpi0 not configured
Dec 3 23:00:32 localhost /netbsd: acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
Dec 3 23:00:32 localhost /netbsd: ACPI: Enabled 4 GPEs in block 00 to 7F
Dec 3 23:00:32 localhost /netbsd: pci0 at mainbus0 bus 0: configuration mode 1
Dec 3 23:00:32 localhost /netbsd: pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: pchb0 at pci0 dev 0 function 0: vendor 8086 product 3ec2 (rev. 0x07)
Dec 3 23:00:32 localhost /netbsd: ppb0 at pci0 dev 1 function 0: vendor 8086 product 1901 (rev. 0x07)
Dec 3 23:00:32 localhost /netbsd: ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s
Dec 3 23:00:32 localhost /netbsd: pci1 at ppb0 bus 1
Dec 3 23:00:32 localhost /netbsd: pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: genfb0 at pci1 dev 0 function 0: vendor 10de product 1c20 (rev. 0xa1)
Dec 3 23:00:32 localhost /netbsd: genfb0: framebuffer at 0xc0000000, size 800x600, depth 32, stride 4096
Dec 3 23:00:32 localhost /netbsd: wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
Dec 3 23:00:32 localhost /netbsd: wsmux1: connecting to wsdisplay0
Dec 3 23:00:32 localhost /netbsd: drm at genfb0 not configured
Dec 3 23:00:32 localhost /netbsd: hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
Dec 3 23:00:32 localhost /netbsd: hdaudio0: interrupting at msi0 vec 0
Dec 3 23:00:32 localhost /netbsd: hdafg0 at hdaudio0: vendor 10de product 0084
Dec 3 23:00:32 localhost /netbsd: hdafg0: DP00 8ch: Digital Out [Jack]
Dec 3 23:00:32 localhost /netbsd: hdafg0: DP01 8ch: Digital Out [Jack]
Dec 3 23:00:32 localhost /netbsd: hdafg0: DP02 8ch: Digital Out [Jack]
Dec 3 23:00:32 localhost /netbsd: hdafg0: DP03 8ch: Digital Out [Jack]
Dec 3 23:00:32 localhost /netbsd: hdafg0: 8ch/0ch 48000Hz PCM16*
Dec 3 23:00:32 localhost /netbsd: xhci0 at pci0 dev 20 function 0: vendor 8086 product a2af (rev. 0x00)
Dec 3 23:00:32 localhost /netbsd: xhci0: interrupting at msi1 vec 0
Dec 3 23:00:32 localhost /netbsd: xhci0: xHCI version 1.0
Dec 3 23:00:32 localhost /netbsd: usb0 at xhci0: USB revision 3.0
Dec 3 23:00:32 localhost /netbsd: usb1 at xhci0: USB revision 2.0
Dec 3 23:00:32 localhost /netbsd: vendor 8086 product a2b1 (miscellaneous DASP) at pci0 dev 20 function 2 not configured
Dec 3 23:00:32 localhost /netbsd: vendor 8086 product a2ba (miscellaneous communications) at pci0 dev 22 function 0 not configured
Dec 3 23:00:32 localhost /netbsd: ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a282 (rev. 0x00)
Dec 3 23:00:32 localhost /netbsd: ahcisata0: interrupting at ioapic0 pin 16
Dec 3 23:00:32 localhost /netbsd: ahcisata0: 64-bit DMA
Dec 3 23:00:32 localhost /netbsd: ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xe334ff41<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,S AL,SSNTF,SNCQ,S64A>
Dec 3 23:00:32 localhost /netbsd: atabus0 at ahcisata0 channel 1
Dec 3 23:00:32 localhost /netbsd: atabus1 at ahcisata0 channel 2
Dec 3 23:00:32 localhost /netbsd: ppb1 at pci0 dev 27 function 0: vendor 8086 product a2e7 (rev. 0xf0)
Dec 3 23:00:32 localhost /netbsd: ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
Dec 3 23:00:32 localhost /netbsd: pci2 at ppb1 bus 2
Dec 3 23:00:32 localhost /netbsd: pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: ppb2 at pci0 dev 28 function 0: vendor 8086 product a290 (rev. 0xf0)
Dec 3 23:00:32 localhost /netbsd: ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
Dec 3 23:00:32 localhost /netbsd: pci3 at ppb2 bus 3
Dec 3 23:00:32 localhost /netbsd: pci3: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: ppb3 at pci0 dev 28 function 5: vendor 8086 product a295 (rev. 0xf0)
Dec 3 23:00:32 localhost /netbsd: ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
Dec 3 23:00:32 localhost /netbsd: ppb3: link is x1 @ 2.5GT/s
Dec 3 23:00:32 localhost /netbsd: pci4 at ppb3 bus 4
Dec 3 23:00:32 localhost /netbsd: pci4: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: vendor 8086 product 24fb (miscellaneous network, revision 0x10) at pci4 dev 0 function 0 not configured
Dec 3 23:00:32 localhost /netbsd: ppb4 at pci0 dev 29 function 0: vendor 8086 product a298 (rev. 0xf0)
Dec 3 23:00:32 localhost /netbsd: ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
Dec 3 23:00:32 localhost /netbsd: pci5 at ppb4 bus 5
Dec 3 23:00:32 localhost /netbsd: pci5: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: pcib0 at pci0 dev 31 function 0: vendor 8086 product a2c9 (rev. 0x00)
Dec 3 23:00:32 localhost /netbsd: vendor 8086 product a2a1 (miscellaneous memory) at pci0 dev 31 function 2 not configured
Dec 3 23:00:32 localhost /netbsd: hdaudio1 at pci0 dev 31 function 3: HD Audio Controller
Dec 3 23:00:32 localhost /netbsd: hdaudio1: interrupting at msi2 vec 0
Dec 3 23:00:32 localhost /netbsd: hdafg1 at hdaudio1: vendor 10ec product 0235
Dec 3 23:00:32 localhost /netbsd: hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
Dec 3 23:00:32 localhost /netbsd: hdafg1: ADC01 2ch: Mic In [Jack]
Dec 3 23:00:32 localhost /netbsd: hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
Dec 3 23:00:32 localhost /netbsd: audio0 at hdafg1: full duplex, playback, capture, mmap, independent
Dec 3 23:00:32 localhost /netbsd: hdafg1: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
Dec 3 23:00:32 localhost /netbsd: hdafg1: Latency: 128 milliseconds
Dec 3 23:00:32 localhost /netbsd: spkr0 at audio0: PC Speaker (synthesized)
Dec 3 23:00:32 localhost /netbsd: ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a2a3 (rev. 0x00)
Dec 3 23:00:32 localhost /netbsd: ichsmb0: interrupting at ioapic0 pin 16
Dec 3 23:00:32 localhost /netbsd: iic0 at ichsmb0: I2C bus
Dec 3 23:00:32 localhost /netbsd: wm0 at pci0 dev 31 function 6: I219 V Ethernet Connection (rev. 0x00)
Dec 3 23:00:32 localhost /netbsd: wm0: interrupting at msi3 vec 0
Dec 3 23:00:32 localhost /netbsd: wm0: PCI-Express bus
Dec 3 23:00:32 localhost /netbsd: wm0: 4096 words FLASH
Dec 3 23:00:32 localhost /netbsd: wm0: Ethernet address 70:85:c2:7b:41:57
Dec 3 23:00:32 localhost /netbsd: wm0: 0xa4080<FLASH,PCIE,ASF_FIRM,AMT>
Dec 3 23:00:32 localhost /netbsd: wm0: MDIC write timed out: phy 1 reg 31
Dec 3 23:00:32 localhost /netbsd: wm0: MDIC read timed out: phy 1 reg 23
Dec 3 23:00:32 localhost /netbsd: wm_ulp_disable: Force SMBus first.
Dec 3 23:00:32 localhost /netbsd: wm0: MDIC write error: phy 1 reg 23
Dec 3 23:00:32 localhost /netbsd: ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
Dec 3 23:00:32 localhost /netbsd: ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Dec 3 23:00:32 localhost /netbsd: isa0 at pcib0
Dec 3 23:00:32 localhost /netbsd: pckbc0 at isa0 port 0x60-0x64
Dec 3 23:00:32 localhost /netbsd: pcppi0 at isa0 port 0x61
Dec 3 23:00:32 localhost /netbsd: spkr1 at pcppi0: PC Speaker
Dec 3 23:00:32 localhost /netbsd: midi0 at pcppi0: PC speaker
Dec 3 23:00:32 localhost /netbsd: sysbeep0 at pcppi0
Dec 3 23:00:32 localhost /netbsd: attimer1: attached to pcppi0
Dec 3 23:00:32 localhost /netbsd: acpicpu0 at cpu0: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
Dec 3 23:00:32 localhost /netbsd: acpicpu0: C2: FFH, lat 79 us, pow 500 mW
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2401 MHz, turbo boost
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2400 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P2: FFH, lat 10 us, pow 32872 mW, 2300 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P3: FFH, lat 10 us, pow 31127 mW, 2200 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P4: FFH, lat 10 us, pow 29417 mW, 2100 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P5: FFH, lat 10 us, pow 26096 mW, 1900 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P6: FFH, lat 10 us, pow 24490 mW, 1800 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P7: FFH, lat 10 us, pow 22588 mW, 1700 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P8: FFH, lat 10 us, pow 21045 mW, 1600 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P9: FFH, lat 10 us, pow 19534 mW, 1500 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P10: FFH, lat 10 us, pow 18055 mW, 1400 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P11: FFH, lat 10 us, pow 16611 mW, 1300 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P12: FFH, lat 10 us, pow 13508 mW, 1100 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P13: FFH, lat 10 us, pow 12156 mW, 1000 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P14: FFH, lat 10 us, pow 10834 mW, 900 MHz
Dec 3 23:00:32 localhost /netbsd: acpicpu0: P15: FFH, lat 10 us, pow 9543 mW, 800 MHz
Dec 3 23:00:32 localhost /netbsd: coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
Dec 3 23:00:32 localhost /netbsd: acpicpu1 at cpu1: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
Dec 3 23:00:32 localhost /netbsd: acpicpu2 at cpu2: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
Dec 3 23:00:32 localhost /netbsd: acpicpu3 at cpu3: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
Dec 3 23:00:32 localhost /netbsd: acpicpu4 at cpu4: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=100
Dec 3 23:00:32 localhost /netbsd: acpicpu5 at cpu5: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=100
Dec 3 23:00:32 localhost /netbsd: acpicpu6 at cpu6: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: acpicpu7 at cpu7: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: acpicpu8 at cpu8: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: acpicpu9 at cpu9: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: acpicpu10 at cpu10: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: acpicpu11 at cpu11: ACPI CPU
Dec 3 23:00:32 localhost /netbsd: timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Dec 3 23:00:32 localhost /netbsd: timecounter: Timecounter "TSC" frequency 2400481220 Hz quality 3000
Dec 3 23:00:32 localhost /netbsd: uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
Dec 3 23:00:32 localhost /netbsd: uhub0: 10 ports with 10 removable, self powered
Dec 3 23:00:32 localhost /netbsd: uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
Dec 3 23:00:32 localhost /netbsd: uhub1: 16 ports with 16 removable, self powered
Dec 3 23:00:32 localhost /netbsd: IPsec: Initialized Security Association Processing.
Dec 3 23:00:32 localhost /netbsd: ahcisata0 port 1: device present, speed: 6.0Gb/s
Dec 3 23:00:32 localhost /netbsd: ahcisata0 port 2: PHY offline
Dec 3 23:00:32 localhost /netbsd: wd0 at atabus0 drive 0
Dec 3 23:00:32 localhost /netbsd: wd0: <Crucial_CT525MX300SSD1>
Dec 3 23:00:32 localhost /netbsd: wd0: drive supports 16-sector PIO transfers, LBA48 addressing
Dec 3 23:00:32 localhost /netbsd: wd0: 489 GB, 1017471 cyl, 16 head, 63 sec, 512 bytes/sect x 1025610768 sectors
Dec 3 23:00:32 localhost /netbsd: wd0: GPT GUID: 92bf8a52-fb33-470e-aba5-3865b44abf90
Dec 3 23:00:32 localhost /netbsd: dk0 at wd0: "EFI system", 262144 blocks at 4096, type: msdos
Dec 3 23:00:32 localhost /netbsd: dk1 at wd0: "NetBSD", 524288000 blocks at 266240, type: ffs
Dec 3 23:00:32 localhost /netbsd: dk2 at wd0: "swap", 16777216 blocks at 524554240, type: swap
Dec 3 23:00:32 localhost /netbsd: dk3 at wd0: "930b5a0f-74a2-432c-90e2-9499c9dadc82", 1024000 blocks at 541331456, type: msdos
Dec 3 23:00:32 localhost /netbsd: dk4 at wd0: "8534cae2-7250-47a5-9a07-105e97a0cdb5", 83886080 blocks at 542355456, type: <unknown>
Dec 3 23:00:32 localhost /netbsd: dk5 at wd0: "f91ef954-a7c7-4768-af2e-de8ccee42c8c", 366665728 blocks at 626241536, type: <unknown>
Dec 3 23:00:32 localhost /netbsd: dk6 at wd0: "0e87f7a0-19a8-43f3-be47-6f576e7019c3", 32703471 blocks at 992907264, type: <unknown>
Dec 3 23:00:32 localhost /netbsd: wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
Dec 3 23:00:32 localhost /netbsd: wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Dec 3 23:00:32 localhost /netbsd: uhidev0 at uhub1 port 1 configuration 1 interface 0
Dec 3 23:00:32 localhost /netbsd: uhidev0: PIXART (0x93a) USB OPTICAL MOUSE (0x2510), rev 1.10/1.00, addr 1, iclass 3/1
Dec 3 23:00:32 localhost /netbsd: ums0 at uhidev0: 3 buttons and Z dir
Dec 3 23:00:32 localhost /netbsd: wsmouse0 at ums0 mux 0
Dec 3 23:00:32 localhost /netbsd: uhidev1 at uhub1 port 2 configuration 1 interface 0
Dec 3 23:00:32 localhost /netbsd: uhidev1: vendor 04f3 (0x4f3) product 0103 (0x103), rev 2.00/1.07, addr 2, iclass 3/1
Dec 3 23:00:32 localhost /netbsd: ukbd0 at uhidev1
Dec 3 23:00:32 localhost /netbsd: wskbd0 at ukbd0: console keyboard, using wsdisplay0
Dec 3 23:00:32 localhost /netbsd: uhidev2 at uhub1 port 2 configuration 1 interface 1
Dec 3 23:00:32 localhost /netbsd: uhidev2: vendor 04f3 (0x4f3) product 0103 (0x103), rev 2.00/1.07, addr 2, iclass 3/0
Dec 3 23:00:32 localhost /netbsd: uhidev2: 2 report ids
Dec 3 23:00:32 localhost /netbsd: uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
Dec 3 23:00:32 localhost /netbsd: uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
Dec 3 23:00:32 localhost /netbsd: ubt0 at uhub1 port 10
Dec 3 23:00:32 localhost /netbsd: ubt0: vendor 8087 (0x8087) product 0aa7 (0xaa7), rev 2.00/0.01, addr 3
Dec 3 23:00:32 localhost /netbsd: umass0 at uhub1 port 11 configuration 1 interface 0
Dec 3 23:00:32 localhost /netbsd: umass0: BUFFALO (0x411) USB-SATA Bridge (0x24d), rev 2.00/1.00, addr 4
Dec 3 23:00:32 localhost /netbsd: umass0: using SCSI over Bulk-Only
Dec 3 23:00:32 localhost /netbsd: scsibus0 at umass0: 2 targets, 1 lun per target
Dec 3 23:00:32 localhost /netbsd: sd0 at scsibus0 target 0 lun 0: <BUFFALO, External HDD, 0000> disk fixed
Dec 3 23:00:32 localhost /netbsd: sd0: 2794 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors
Dec 3 23:00:32 localhost /netbsd: sd0: GPT GUID: 3979e0d5-8729-47a6-ba5b-3be2795fb379
Dec 3 23:00:32 localhost /netbsd: dk7 at sd0: "Basic data partition", 5860530176 blocks at 2048, type: <unknown>
Dec 3 23:00:32 localhost /netbsd: pad0: outputs: 44100Hz, 16-bit, stereo
Dec 3 23:00:32 localhost /netbsd: audio1 at pad0: half duplex, playback, capture, mmap
Dec 3 23:00:32 localhost /netbsd: pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
Dec 3 23:00:32 localhost /netbsd: pad0: Latency: 139 milliseconds
Dec 3 23:00:32 localhost /netbsd: spkr2 at audio1: PC Speaker (synthesized)
Dec 3 23:00:32 localhost /netbsd: WARNING: 2 errors while detecting hardware; check system log.
Dec 3 23:00:32 localhost /netbsd: boot device: wd0
Dec 3 23:00:32 localhost /netbsd: root on dk1 dumps on dk2
Dec 3 23:00:32 localhost /netbsd: root file system type: ffs
Dec 3 23:00:32 localhost /netbsd: kern.module.path=/stand/amd64/8.0/modules
Dec 3 23:00:32 localhost /netbsd: WARNING: clock gained 23 days
Dec 3 23:00:32 localhost /netbsd: wsdisplay0: screen 1 added (default, vt100 emulation)
Dec 3 23:00:32 localhost /netbsd: wsdisplay0: screen 2 added (default, vt100 emulation)
Dec 3 23:00:32 localhost /netbsd: wsdisplay0: screen 3 added (default, vt100 emulation)
Dec 3 23:00:32 localhost /netbsd: wsdisplay0: screen 4 added (default, vt100 emulation)
Dec 3 23:00:35 localhost /netbsd: acpibat0: normal capacity on 'charge state'
Dec 3 23:00:38 localhost dhcpcd[230]: wm0: no IPv6 Routers available
Dec 3 23:00:41 localhost ntpdate[214]: step time server 133.243.238.244 offset 0.133496 sec
Dec 3 23:00:41 localhost savecore: no core dump
Dec 3 23:00:41 localhost ntpd[307]: ntpd 4.2.8p11-o Fri Apr 6 20:03:53 EDT 2018 (import): Starting
Dec 3 23:00:41 localhost ntpd[307]: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid
Dec 3 23:00:41 localhost ntpd[405]: proto: precision = 0.554 usec (-21)
Dec 3 23:00:41 localhost ntpd[405]: Listen and drop on 0 v6wildcard [::]:123
Dec 3 23:00:41 localhost ntpd[405]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Dec 3 23:00:41 localhost ntpd[405]: Listen normally on 2 wm0 [fe80::7285:c2ff:fe7b:4157%1]:123
Dec 3 23:00:41 localhost ntpd[405]: Listen normally on 3 wm0 192.168.2.100:123
Dec 3 23:00:41 localhost ntpd[405]: Listen normally on 4 lo0 127.0.0.1:123
Dec 3 23:00:41 localhost ntpd[405]: Listen normally on 5 lo0 [::1]:123
Dec 3 23:00:41 localhost ntpd[405]: Listen normally on 6 lo0 [fe80::1%2]:123
Dec 3 23:00:41 localhost ntpd[405]: Listening on routing socket on fd #27 for interface updates
Dec 3 23:01:07 localhost /netbsd: wsmouse0: detached
Dec 3 23:01:07 localhost /netbsd: wsmouse0tached
Dec 3 23:01:07 localhost /netbsd: uhidev0: detached
Dec 3 23:01:09 localhost /netbsd: wsmouse0tacheduhidev0 at uhub1 port 1 configuration 1 interface 0
Dec 3 23:01:09 localhost /netbsd: uhidev0: PIXART (0x93a) USB OPTICAL MOUSE (0x2510), rev 1.10/1.00, addr 5, iclass 3/1
Dec 3 23:01:09 localhost /netbsd: ums0 at uhidev0: 3 buttons and Z dir
Dec 3 23:01:09 localhost /netbsd: wsmouse0 at ums0 mux 0
Dec 3 23:02:09 localhost /netbsd: wsmouse0: detached
Dec 3 23:02:09 localhost /netbsd: ums0: detached
Dec 3 23:02:09 localhost /netbsd: uhidev0: detached
Dec 3 23:02:09 localhost /netbsd: uhidev0: at uhub1 port 1 (addr 5) disconnected
Dec 3 23:02:11 localhost /netbsd: uhidev0 at uhub1 port 1 configuration 1 interface 0
Dec 3 23:02:11 localhost /netbsd: uhidev0: PIXART (0x93a) USB OPTICAL MOUSE (0x2510), rev 1.10/1.00, addr 6, iclass 3/1
Dec 3 23:02:11 localhost /netbsd: ums0 at uhidev0: 3 buttons and Z dir
Dec 3 23:02:11 localhost /netbsd: wsmouse0 at ums0 mux 0
Dec 3 23:03:11 localhost /netbsd: wsmouse0: detached
Dec 3 23:03:11 localhost /netbsd: ums0: detached
Dec 3 23:03:11 localhost /netbsd: uhidev0: detached
Dec 3 23:03:11 localhost /netbsd: uhidev0: at uhub1 port 1 (addr 6) disconnected
Dec 3 23:03:13 localhost /netbsd: uhidev0 at uhub1 port 1 configuration 1 interface 0
Dec 3 23:03:13 localhost /netbsd: uhidev0: PIXART (0x93a) USB OPTICAL MOUSE (0x2510), rev 1.10/1.00, addr 7, iclass 3/1
Dec 3 23:03:13 localhost /netbsd: ums0 at uhidev0: 3 buttons and Z dir
Dec 3 23:03:13 localhost /netbsd: wsmouse0 at ums0 mux 0
Dec 3 23:04:13 localhost /netbsd: wsmouse0: detached
Dec 3 23:04:13 localhost /netbsd: ums0: detached
Dec 3 23:04:13 localhost /netbsd: uhidev0: detached
Dec 3 23:04:13 localhost /netbsd: uhidev0: at uhub1 port 1 (addr 7) disconnected
Dec 3 23:04:15 localhost /netbsd: uhidev0 at uhub1 port 1 configuration 1 interface 0
Dec 3 23:04:15 localhost /netbsd: uhidev0: PIXART (0x93a) USB OPTICAL MOUSE (0x2510), rev 1.10/1.00, addr 8, iclass 3/1
Dec 3 23:04:15 localhost /netbsd: ums0 at uhidev0: 3 buttons and Z dir
Dec 3 23:04:15 localhost /netbsd: wsmouse0 at ums0 mux 0
Dec 3 23:05:15 localhost /netbsd: wsmouse0: detached
Dec 3 23:05:15 localhost /netbsd: ums0: detached
Dec 3 23:05:15 localhost /netbsd: uhidev0: detached
Dec 3 23:05:15 localhost /netbsd: uhidev0: at uhub1 port 1 (addr 8) disconnected
Dec 3 23:05:18 localhost /netbsd: uhidev0 at uhub1 port 1 configuration 1 interface 0
Dec 3 23:05:18 localhost /netbsd: uhidev0: PIXART (0x93a) USB OPTICAL MOUSE (0x2510), rev 1.10/1.00, addr 9, iclass 3/1
Dec 3 23:05:18 localhost /netbsd: ums0 at uhidev0: 3 buttons and Z dir
Dec 3 23:05:18 localhost /netbsd: wsmouse0 at ums0 mux 0
Dec 3 23:05:20 localhost syslogd[287]: Exiting on signal 15
Reply With Quote
  #9   (View Single Post)  
Old 1 Week Ago
Sensucht94's Avatar
Sensucht94 Sensucht94 is offline
Real Name: Paolo Vincenzo Olivo
Port Guard
 
Join Date: Oct 2017
Location: Rome
Posts: 42
Default

Looks like wiki is outdated, in newer X versions, it.s not necessary, nor advisable to create an ex novo xorg.conf first, especially if you generate it using '-configure', which is prone to errors.

Just echo 'exec twm' to a ~/. xinitrc file, and see what happens

PS: I'm sorry I meant /var/run/dmesg.boot, not /var/log/messages. It should reveal if nouveau is loaded. Anyway if you have high resolution console then it's practically 100% sure that nouveau is loaded
__________________
Be the change you want to see in the World
Reply With Quote
Old 1 Week Ago
shep shep is offline
Real Name: Scott
Rc.conf Instructor
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 1,191
Default

Code:
Dec 3 23:00:32 localhost /netbsd: pci1 at ppb0 bus 1
Dec 3 23:00:32 localhost /netbsd: pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: genfb0 at pci1 dev 0 function 0: vendor 10de product 1c20 (rev. 0xa1)
Dec 3 23:00:32 localhost /netbsd: genfb0: framebuffer at 0xc0000000, size 800x600, depth 32, stride 4096
Dec 3 23:00:32 localhost /netbsd: wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
Dec 3 23:00:32 localhost /netbsd: wsmux1: connecting to wsdisplay0
Dec 3 23:00:32 localhost /netbsd: drm at genfb0 not configured
Your video is not recognized beyond the base framebuffer. This could occur if you have the Nouveau driver but it does not support your card or if you do not have the driver enabled.

I went back and look and my earlier statment needs to be clarified. The Nouveau driver is enabled in the ftp://nyftp.netbsd/pub/NetBSD-daily releases. These are "testing" releases. @Sensucht, are you using release or stable?

An easy way to check is to download the kernel from nyftp and boot it. Compare the dmesgs with your previously installed kernel.

Last edited by shep; 1 Week Ago at 10:53 PM.
Reply With Quote
Old 1 Week Ago
Sensucht94's Avatar
Sensucht94 Sensucht94 is offline
Real Name: Paolo Vincenzo Olivo
Port Guard
 
Join Date: Oct 2017
Location: Rome
Posts: 42
Default

Quote:
Originally Posted by shep View Post
Code:
Dec 3 23:00:32 localhost /netbsd: pci1 at ppb0 bus 1
Dec 3 23:00:32 localhost /netbsd: pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Dec 3 23:00:32 localhost /netbsd: genfb0 at pci1 dev 0 function 0: vendor 10de product 1c20 (rev. 0xa1)
Dec 3 23:00:32 localhost /netbsd: genfb0: framebuffer at 0xc0000000, size 800x600, depth 32, stride 4096
Dec 3 23:00:32 localhost /netbsd: wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
Dec 3 23:00:32 localhost /netbsd: wsmux1: connecting to wsdisplay0
Dec 3 23:00:32 localhost /netbsd: drm at genfb0 not configured
Your video is not recognized beyond the base framebuffer. This could occur if you have the Nouveau driver but it does not support your card or if you do not have the driver enabled.
oops, I would have (silly and wrongly) bet that /var/log/messages didn't report kernel messages on stock standard NetBSD installations, as syslogd() physically resides on /usr, which is mounted late unless OPTIONAL:/usr were added to critical_filesystems_local in /etc/rc.conf. Learnt something new thanks to you

Quote:
I went back and look and my earlier statment needs to be clarified. The Nouveau driver is enabled in the ftp://nyftp.netbsd/pub/NetBSD-daily releases. These are "testing" releases. @Sensucht, are you using release or stable?

An easy way to check is to download the kernel from nyftp and boot it. Compare the dmesgs with your previously installed kernel.
I'm 100% sure nouveau is supported and enabled by default on amd64 on NetBSD 8.0 formal release, as I'm o 8.0 (even though using a custom kernel) and a couple of guys of my acquaintance have nouveau KMS/DRM on 8.0 with GENERIC kernel.

grep -i nouveau /usr/src/sys/arch/amd64/conf/GENERIC reveals in fact:
Code:
nouveau*        at pci? dev ? function ?
nouveaufb*      at nouveaufbbus?
I tested 8.0 on GTX 760 too and got nouveau KMS/DRM support as well, while I know for sure this doesn't work on either 10xx or Optimus
__________________
Be the change you want to see in the World

Last edited by Sensucht94; 1 Week Ago at 01:02 PM.
Reply With Quote
Old 1 Week Ago
Sensucht94's Avatar
Sensucht94 Sensucht94 is offline
Real Name: Paolo Vincenzo Olivo
Port Guard
 
Join Date: Oct 2017
Location: Rome
Posts: 42
Default

so, either way, it would seem that @BSD_user's GPU is not supported in 8.0 (as shep underlined, kernel is loading unaccelerated genfb framebuffer driver for your device rather than nouveau), so what graphics are you actually trying to make work? In case you didn't know for sure, just type

Code:
pcictl pci0 list | grep -i nvidia
which in my case returns

Code:
001:00:0: NVIDIA product 0a68 (VGA display, revision 0xa2)
now compare the PCI ID displayed right after 'product' (in this case '0a68') with this PCI ID Repository. In my case 0a68 matches GT218M [GeForce G 105M] which is what I have indeed.

Yet, I suspect this isn't going to end happily, given our kernel messages logged above, showing that genfb() had been loaded loaded on PCI 001 for product 1c20, which according to the PCI ID database linked above is:
Code:
GP106M [GeForce GTX 1060 Mobile]
which, as I said above, is not supported by nouveau on NetBSD, not even in HEAD/-current, I'm sincerely sorry
Nouveau supports 10xx Pascal Series only on Linux, IIRC since May 2017, starting with 4.12

It would be still advisable to ask for future support on netbsd-users mailing list, port-amd64, and tech-kern as well as #nouveau/#netbsd IRC channels on Freenode, and/or trying -current branch no sooner will DRM on HEAD be updated to Linux 4.12 or later, which I think is going to happen in a year time (only FreeBSD has DRM support catching up with Linux > 4.4). Remember to always provide device specs and additional system info.

Another alternative is FreeBSD with proprietary Nvidia drivers, which works just well and with way better performance (nouveau performance compared with nvidia-driver decreases exponentially after 7xx, so I wouldn't recommend it anyway).
__________________
Be the change you want to see in the World

Last edited by Sensucht94; 1 Week Ago at 01:04 PM.
Reply With Quote
Old 1 Week Ago
BSD_user BSD_user is offline
New User
 
Join Date: Oct 2018
Posts: 3
Default

shep and Sensucht94

Thank you very much for detailed advice.
It is sad I can't use NetBSD on my new PC now, but I will check GPU too (not only CPU) when I buy a new PC.
I've already tried FreeBSD with proprietary driver and X work well, but somewhat it very often crashed down. The cause might not be X. So I returned to NetBSD. (In my old PC, I used NetBSD 7.1).
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NetBSD NetBSD gets nouveau w/ hardware OpenGL Scarletts News 0 31st October 2015 05:05 PM
Compiling a kernel with nouveau support darktrym NetBSD Package System (pkgsrc) 1 26th June 2011 12:14 AM


All times are GMT. The time now is 03:39 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick