|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
linear framebuffer access unavailable .. Caught signal 11 (Segmentation fault)
Hi everybody!
I upgraded OpenBSD-5.1 from stable to current .. after sysmerging I was asked what to do .. I chose m (merge) and i (install) instead of default option (leaving files until later for manual editing) After reboot I couldn't start X : Xorg.0.log Code:
70.025] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem (Operation not permitted) Check that you have set 'machdep.allowaperture=1' in /etc/sysctl.conf and reboot your machine refer to xf86(4) for details [ 70.025] linear framebuffer access unavailable [ 70.025] Segmentation fault at address 0x0 [ 70.026] Fatal server error: [ 70.026] Caught signal 11 (Segmentation fault). Server aborting [ 70.026] [ 70.026] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 70.026] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 70.026] [ 70.027] Server terminated with error (1). Closing log file. Code:
OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012 todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM real mem = 2145447936 (2046MB) avail mem = 2099544064 (2002MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 02/13/07, BIOS32 rev. 0 @ 0xfd390, SMBIOS rev. 2.33 @ 0xe3810 (25 entries) bios0: vendor Acer version "V3.50" date 02/13/2007 bios0: Acer Aspire 5610 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC HPET MCFG SLIC DBGP APIC BOOT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PXS1(S4) PXS2(S4) BCOL(S4) PXS4(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S5) MODM(S3) AZAL(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 132MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.73 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus 3 (RP02) acpiprt4 at acpi0: bus 4 (RP03) acpiprt5 at acpi0: bus 5 (RP04) acpiprt6 at acpi0: bus 6 (PCIB) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 85 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibtn2 at acpi0: PWRB acpibat0 at acpi0: BAT1 model "GC86503SY90 " type Lion oem "SONY " acpiac0 at acpi0: AC unit online acpivideo0 at acpi0: VGA_ acpivideo1 at acpi0: GFX0 bios0: ROM list: 0xc0000/0xe000 0xce000/0x1800 0xe0000/0x1800! 0xe3800/0x800! cpu0: Enhanced SpeedStep 1730 MHz: speeds: 1733, 1333, 1067, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Realtek ALC883, Conexant/0x2c06, using Realtek ALC883 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18 pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 19 pci5 at ppb4 bus 5 wpi0 at pci5 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:28:eb:bc uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci6 at ppb5 bus 6 bce0 at pci6 dev 1 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 21, address 00:16:d4:d2:d6:5e bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 cbb0 at pci6 dev 4 function 0 "ENE CB-712 CardBus" rev 0x10: apic 1 int 16 "ENE Memory Stick" rev 0x01 at pci6 dev 4 function 1 not configured sdhc0 at pci6 dev 4 function 2 "ENE SD Controller" rev 0x01: apic 1 int 17 sdmmc0 at sdhc0 "ENE Flash memory" rev 0x01 at pci6 dev 4 function 3 not configured "ENE SD/MMC" rev 0x01 at pci6 dev 4 function 4 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 7 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <ST96812AS> wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7590A, 1.04> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 4 configuration 1 interface 0 "Logitech product 0x09b0" rev 2.00/0.06 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (752aa17f57263e9e.a) swap on wd0b dump on wd0b wpi0: fatal firmware error firmware error log (count=1): error type = "SYSASSERT" (0x00000005) error data = 0x00000074 branch link = 0x000008B600000274 interrupt link = 0x0000032000003560 time = 1618370039 driver status: tx ring 0: qid=0 cur=4 queued=0 tx ring 1: qid=1 cur=0 queued=0 tx ring 2: qid=2 cur=0 queued=0 tx ring 3: qid=3 cur=0 queued=0 tx ring 4: qid=4 cur=21 queued=0 tx ring 5: qid=5 cur=0 queued=0 rx ring: cur=37 802.11 state 4 umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DataTraveler G2" rev 2.00/1.10 addr 3 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler G2, PMAP> SCSI0 0/direct removable serial.09306545B910B32903AB sd0: 15320MB, 512 bytes/sector, 31375360 sectors Code:
kern.version=OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012 todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP Any help/correction/suggestion/hint is much appreciated Thank you ! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
a segmentation fault line | daemonfowl | OpenBSD General | 3 | 16th June 2012 08:13 PM |
Segmentation fault error139 | delboy | FreeBSD Ports and Packages | 8 | 9th July 2009 06:32 PM |
Segmentation fault (11) - Apache | ijk | FreeBSD Ports and Packages | 16 | 15th July 2008 11:04 AM |
Segmentation fault | ccc | FreeBSD General | 8 | 28th June 2008 02:15 PM |
MySQL C library - segmentation fault on mysql_select_db() when using CC optimisation | gor | OpenBSD Packages and Ports | 7 | 10th June 2008 11:42 PM |