|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
How to "configure" and mount a USB Drive already in use
Greetings:
I've been trying to mount a USB drive for a day or so; and though I've found the references, I can't seem to get past the "rsd0c is not Configured" error message. The device/drive sd0 did show up on my dmesg yesterday; but I can't seem to find any "sd*" drive or any other USB designation emulating a SCSI drive on my dmesg output today. I've been using my USB drives as go btwns on Linux and Windows; and would like to have them available for my OpenBSD Box. I've several files I'd rather keep on the USB and backed up on the Hard Drive. Here's my dmesg: # dmesg OpenBSD 4.5-stable (GENERIC) #0: Sat Jul 11 10:11:35 PDT 2009 IronForge's Machine:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Sempron(tm) ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 2113433600 (2015MB) avail mem = 2035261440 (1940MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/31/04, BIOS32 rev. 0 @ 0xfb490, SMBIOS rev. 2.2 @ 0xf0000 (39 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 08/31/2004 apm0 at bios0: Power Management spec V1.2 (slowidle) apm0: AC on, battery charge unknown acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdef4 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/144 (7 entries) pcibios0: PCI Exclusive IRQs: 3 5 9 10 11 pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000! cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03 sisagp0 at pchb0 agp0 at sisagp0: aperture at 0xd0000000, size 0x8000000 ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 741: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <HDS722540VLAT20> wd0: 16-sector PIO, LBA48, 39266MB, 80418240 sectors wd1 at pciide0 channel 0 drive 1: <Maxtor 6L100P0> wd1: 16-sector PIO, LBA, 95611MB, 195813072 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DRU-530A, 1.0d> ATAPI 5/cdrom removable atapiscsi1 at pciide0 channel 1 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8526B, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 3, Ultra-DMA mode 2 cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 5, SiS7012 AC97 ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auich0 ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 10, version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11, version 1.0, legacy support ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: irq 9, version 1.0, legacy support ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 3 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 11, address 00:11:5b:15:b4:c5 rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1 unknown vendor 0x2000 product 0x2800 (class communications subclass modem, rev 0x02) at pci0 dev 11 function 0 not configured isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1 biomask ef4d netmask ef4d ttymask ffdf mtrr: Pentium Pro MTRR support uhub0: device problem, disabling port 4 softraid0 at root root on wd0a swap on wd0b dump on wd0b kqemu: kqemu version 0x00010300 loaded, max locked mem=1031948kB DDB symbols added: 337632 bytes uhub0: device problem, disabling port 6 uhub0: device problem, disabling port 5 # I appreciate the help. |
Tags |
mount, ms-dos, usb, windows |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Opera Port - conflicting pkgs in "make install" | IronForge | OpenBSD Packages and Ports | 5 | 29th October 2009 05:10 AM |
Fixed "xinit" after _7 _8, "how" here in case anyones' "X" breaks... using "nvidia" | jb_daefo | Guides | 0 | 5th October 2009 09:31 PM |
"Thanks" and "Edit Tags". | diw | Feedback and Suggestions | 2 | 29th March 2009 12:06 AM |
Scripted sysinstall fails with "Command 'system' failed" | PeterSteele | FreeBSD Installation and Upgrading | 0 | 13th November 2008 11:31 PM |
Took hardisk out and replaced to another machine: CAN"T Mount | disappearedng | FreeBSD General | 2 | 17th June 2008 07:40 AM |