|
OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
bicon and OpenBSD
Hi All !
I'm running OpenBSD 5.7-beta (GENERIC.MP) amd64 I have git-cloned bicon -a bi-directional console- but I got this message when running autogen.sh : Code:
checking for pkg-config... /usr/bin/pkg-config checking for autoreconf... /usr/local/bin/autoreconf running autoreconf --force --install --verbose Provide an AUTOCONF_VERSION environment variable, please what I need is a bi-directional terminal.mlterm and sakura ,while supporting unicode, still fail to render right-to-left properly and characters are shown twisted under OpenBSD. Any help or suggestion is welcome. Thanks. https://github.com/behdad/bicon |
|
|||
Trying :
automake-1.15 autoconf-2.69p1 After exporting both versions I got : Code:
# ./autogen.sh checking for pkg-config... /usr/bin/pkg-config checking for autoreconf... /usr/local/bin/autoreconf running autoreconf --force --install --verbose autoreconf-2.69: Entering directory `.' autoreconf-2.69: configure.ac: not using Gettext autoreconf-2.69: running: aclocal --force autoreconf-2.69: configure.ac: tracing autoreconf-2.69: configure.ac: not using Libtool autoreconf-2.69: running: /usr/local/bin/autoconf-2.69 --force configure.ac:10: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf-2.69: /usr/local/bin/autoconf-2.69 failed with exit status: 1 |
|
||||
Do you have libtool installed?
Edit: A bit of explanation: AC_PROG_* tests for standard programs (a large number are available--search the autoconf documentation). These accept a list of programs to test for, such as: AC_PROG_AWK(mawk gawk nawk tawk fawk bawk hawk cawk pawk) Copied/Pasted shamelessly from "A brief introduction to Autoconf" at: http://www.edwardrosten.com/code/autoconf/
__________________
Linux/Network-Security Engineer by Profession. OpenBSD user by choice. Last edited by rocket357; 3rd March 2015 at 03:11 PM. |
|
|||
No ... even yet after installing libootl-2.4.2p0 I got another error message :
Code:
# ./autogen.sh checking for pkg-config... /usr/bin/pkg-config checking for autoreconf... /usr/local/bin/autoreconf running autoreconf --force --install --verbose /usr/local/bin/autoreconf[35]: /usr/local/bin/autoreconf-autoconf-2.69p1: not found Code:
export AUTOCONF_VERSION=2.69 export AUTOMAKE_VERSION=autoamke-1.15 $ autoreconf /usr/local/bin/aclocal[35]: /usr/local/bin/aclocal-automake-1.15: not found autoreconf-2.69: aclocal failed with exit status: 127 |
|
|||
Yes it does and pkg_info -L automake shows :
Code:
/usr/local/bin/aclocal-1.15 /usr/local/bin/automake-1.15 ... ( I recall I once had a fully rtl-capable mlterm on wheezy right after installing libfribidi-dev) Last edited by pawaan; 3rd March 2015 at 05:53 PM. |
|
|||
Sorry , yes it's missing and autoreconf-autoconf* is missing as well
|
|
|||
I am using the git repo
https://github.com/behdad/bicon not the old tarballs (version 0.2.0) : http://old.arabeyes.org/project.php?proj=BiCon I tried compiling the latter: ./configure went ok but config.log shew missings: Code:
ACLOCAL='${SHELL} /usr/ports/misc/bicon-0.2.0/missing --run aclocal-1.8' AMTAR='${SHELL} /usr/ports/misc/bicon-0.2.0/missing --run tar' AUTOCONF='${SHELL} /usr/ports/misc/bicon-0.2.0/missing --run autoconf' AUTOHEADER='${SHELL} /usr/ports/misc/bicon-0.2.0/missing --run autoheader' AUTOMAKE='${SHELL} /usr/ports/misc/bicon-0.2.0/missing --run automake-1.8' Code:
... Making all in bicon gmake[2]: Entering directory '/usr/ports/misc/bicon-0.2.0/bicon' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include -I/usr/local/include/fri bidi -I../bjoining -I../bconsole -g -O2 -Wall -pedantic -MT bicon_bin-pty_spaw n.o -MD -MP -MF ".deps/bicon_bin-pty_spawn.Tpo" -c -o bicon_bin-pty_spawn.o `test -f 'pty_spawn.c' || echo './'`pty_spawn.c; \ then mv -f ".deps/bicon_bin-pty_spawn.Tpo" ".deps/bicon_bin-pty_spawn.Po"; else rm -f ".deps/bicon_bin-pty_spawn.Tpo"; exit 1; fi pty_spawn.c:15:17: error: pty.h: No such file or directory pty_spawn.c: In function '_fork': pty_spawn.c:26: warning: implicit declaration of function 'forkpty' pty_spawn.c:33: warning: implicit declaration of function 'openpty' pty_spawn.c: In function 'bicon_spawn': pty_spawn.c:94: error: storage size of 'ts' isn't known pty_spawn.c:94: error: storage size of 'newts' isn't known pty_spawn.c:104: warning: implicit declaration of function 'tcgetattr' pty_spawn.c:106: warning: implicit declaration of function 'cfmakeraw' pty_spawn.c:107: warning: implicit declaration of function 'tcsetattr' pty_spawn.c:107: error: 'TCSAFLUSH' undeclared (first use in this function) pty_spawn.c:107: error: (Each undeclared identifier is reported only once pty_spawn.c:107: error: for each function it appears in.) pty_spawn.c:94: warning: unused variable 'newts' pty_spawn.c:94: warning: unused variable 'ts' Makefile:344: recipe for target 'bicon_bin-pty_spawn.o' failed gmake[2]: *** [bicon_bin-pty_spawn.o] Error 1 gmake[2]: Leaving directory '/usr/ports/misc/bicon-0.2.0/bicon' Makefile:292: recipe for target 'all-recursive' failed gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory '/usr/ports/misc/bicon-0.2.0' Makefile:202: recipe for target 'all' failed gmake: *** [all] Error 2 Last edited by pawaan; 3rd March 2015 at 07:09 PM. |
|
|||
That's the file missing from my two favored operating systems :
Code:
pty_spawn.c:15:17: error: pty.h: No such file or directory I got a similar error while building on NetBSD 7.0_BETA amd64 : Code:
In file included from bicon_read.c:23:0: /usr/include/string.h:56:6: note: expected ‘const char *’ but argument is of tye ‘ uchar *’ int strcmp(const char *, const char *); ^ if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/pkg/include/fribidi -I../bjoining I.. /bconsole -g -O2 -Wall -pedantic -MT bicon_bin-pty_spawn.o -MD -MP -MF "deps/b icon_bin-pty_spawn.Tpo" -c -o bicon_bin-pty_spawn.o `test -f 'pty_spawn.c || echo './'`pty_spawn.c; \ then mv -f ".deps/bicon_bin-pty_spawn.Tpo" ".deps/bicon_bin-pty_spawn.Po"; elserm -f ".deps/bicon_bin-pty_spawn.Tpo"; exit 1; fi pty_spawn.c:15:17: fatal error: pty.h: No such file or directory #include <pty.h> ^ compilation terminated. Makefile:344: recipe for target 'bicon_bin-pty_spawn.o' failed gmake[2]: *** [bicon_bin-pty_spawn.o] Error 1 gmake[2]: Leaving directory '/usr/pkgsrc/wip/bicon-0.2.0/bicon' Makefile:292: recipe for target 'all-recursive' failed gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory '/usr/pkgsrc/wip/bicon-0.2.0' Makefile:202: recipe for target 'all' failed gmake: *** [all] Error 2 Last edited by ocicat; 3rd March 2015 at 08:53 PM. Reason: removed profanity |
|
|||
Quote:
There is also a Linuxism in the form of psfaddtable. The attached diff will build bicon on OpenBSD. Build with: Code:
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 autoreconf -i $ ./configure $ gmake If it works for you and you like it, I suggest upstreaming the pty_spawn.c part of the diff and writing a port for submission to the OpenBSD ports tree which includes the rest of the diff. |
|
|||
Million thanks , ibara ! It works !
Code:
Script started on Wed Mar 4 12:08:17 2015 # ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-unknown-openbsd5.7 checking host system type... x86_64-unknown-openbsd5.7 checking how to print strings... print -r checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert x86_64-unknown-openbsd5.7 file names to x86_64-unknown-openbsd5.7 format... func_convert_file_noop checking how to convert x86_64-unknown-openbsd5.7 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$ checking for dlltool... no checking how to associate runtime and link libraries... print -r -- checking for ar... ar checking for archiver @FILE support... no checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... openbsd5.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether ln -s works... yes checking for dlopen in -ldl... no checking for forkpty in -lutil... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for FRIBIDI... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for unistd.h... (cached) yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for size_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking types of arguments for select... int,fd_set *,struct timeval * checking whether lstat correctly handles trailing slash... yes checking whether stat accepts an empty string... no checking for dup2... yes checking for memmove... yes checking for memset... yes checking for putenv... yes checking for select... yes checking return type of signal handlers... void checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating bicon.pc config.status: creating Makefile config.status: creating bconsole/Makefile config.status: creating bicon/Makefile config.status: creating bin/Makefile config.status: creating bjoining/Makefile config.status: creating doc/Makefile config.status: creating doc/man/Makefile config.status: creating font/Makefile config.status: creating keymap/Makefile config.status: creating testtext/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands # gmake git.mk: Generating .gitignore Provide an AUTOCONF_VERSION environment variable, please WARNING: 'autoconf' is missing on your system. You should only need it if you modified 'configure.ac'. You might want to install the Autoconf and GNU m4 packages. Grab them from any GNU archive site. gmake all-recursive gmake[1]: Entering directory '/home/akaay/gitprojects/bicon' /bin/sh ./config.status --recheck running CONFIG_SHELL=/bin/sh /bin/sh ./configure --no-create --no-recursion checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-unknown-openbsd5.7 checking host system type... x86_64-unknown-openbsd5.7 checking how to print strings... print -r checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert x86_64-unknown-openbsd5.7 file names to x86_64-unknown-openbsd5.7 format... func_convert_file_noop checking how to convert x86_64-unknown-openbsd5.7 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$ checking for dlltool... no checking how to associate runtime and link libraries... print -r -- checking for ar... ar checking for archiver @FILE support... no checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... openbsd5.7 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether ln -s works... yes checking for dlopen in -ldl... no checking for forkpty in -lutil... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for FRIBIDI... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for unistd.h... (cached) yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for size_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking types of arguments for select... int,fd_set *,struct timeval * checking whether lstat correctly handles trailing slash... yes checking whether stat accepts an empty string... no checking for dup2... yes checking for memmove... yes checking for memset... yes checking for putenv... yes checking for select... yes checking return type of signal handlers... void checking that generated files are newer than configure... done configure: creating ./config.status /bin/sh ./config.status config.status: creating bicon.pc config.status: creating Makefile config.status: creating bconsole/Makefile config.status: creating bicon/Makefile config.status: creating bin/Makefile config.status: creating bjoining/Makefile config.status: creating doc/Makefile config.status: creating doc/man/Makefile config.status: creating font/Makefile config.status: creating keymap/Makefile config.status: creating testtext/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands Making all in bjoining gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bjoining' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_compose.lo -MD -MP -MF .deps/bjoining_compose.Tpo -c -o bjoining_compose.lo bjoining_compose.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_compose.lo -MD -MP -MF .deps/bjoining_compose.Tpo -c bjoining_compose.c -fPIC -DPIC -o .libs/bjoining_compose.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_compose.lo -MD -MP -MF .deps/bjoining_compose.Tpo -c bjoining_compose.c -o bjoining_compose.o >/dev/null 2>&1 mv -f .deps/bjoining_compose.Tpo .deps/bjoining_compose.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_charprop.lo -MD -MP -MF .deps/bjoining_charprop.Tpo -c -o bjoining_charprop.lo bjoining_charprop.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_charprop.lo -MD -MP -MF .deps/bjoining_charprop.Tpo -c bjoining_charprop.c -fPIC -DPIC -o .libs/bjoining_charprop.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_charprop.lo -MD -MP -MF .deps/bjoining_charprop.Tpo -c bjoining_charprop.c -o bjoining_charprop.o >/dev/null 2>&1 mv -f .deps/bjoining_charprop.Tpo .deps/bjoining_charprop.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_vis2cuni.lo -MD -MP -MF .deps/bjoining_vis2cuni.Tpo -c -o bjoining_vis2cuni.lo bjoining_vis2cuni.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_vis2cuni.lo -MD -MP -MF .deps/bjoining_vis2cuni.Tpo -c bjoining_vis2cuni.c -fPIC -DPIC -o .libs/bjoining_vis2cuni.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_vis2cuni.lo -MD -MP -MF .deps/bjoining_vis2cuni.Tpo -c bjoining_vis2cuni.c -o bjoining_vis2cuni.o >/dev/null 2>&1 mv -f .deps/bjoining_vis2cuni.Tpo .deps/bjoining_vis2cuni.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_log2cuni.lo -MD -MP -MF .deps/bjoining_log2cuni.Tpo -c -o bjoining_log2cuni.lo bjoining_log2cuni.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_log2cuni.lo -MD -MP -MF .deps/bjoining_log2cuni.Tpo -c bjoining_log2cuni.c -fPIC -DPIC -o .libs/bjoining_log2cuni.o bjoining_log2cuni.c: In function 'bjoining_log2cuni': bjoining_log2cuni.c:25: warning: passing argument 3 of 'fribidi_log2vis' from incompatible pointer type libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_log2cuni.lo -MD -MP -MF .deps/bjoining_log2cuni.Tpo -c bjoining_log2cuni.c -o bjoining_log2cuni.o >/dev/null 2>&1 mv -f .deps/bjoining_log2cuni.Tpo .deps/bjoining_log2cuni.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_ye.lo -MD -MP -MF .deps/bjoining_ye.Tpo -c -o bjoining_ye.lo bjoining_ye.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_ye.lo -MD -MP -MF .deps/bjoining_ye.Tpo -c bjoining_ye.c -fPIC -DPIC -o .libs/bjoining_ye.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_ye.lo -MD -MP -MF .deps/bjoining_ye.Tpo -c bjoining_ye.c -o bjoining_ye.o >/dev/null 2>&1 mv -f .deps/bjoining_ye.Tpo .deps/bjoining_ye.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o libbjoining.la -rpath /usr/local/lib/bicon bjoining_compose.lo bjoining_charprop.lo bjoining_vis2cuni.lo bjoining_log2cuni.lo bjoining_ye.lo -L/usr/local/lib -lfribidi -lutil libtool: link: gcc -shared -fPIC -DPIC -o .libs/libbjoining.so.0.0 .libs/bjoining_compose.o .libs/bjoining_charprop.o .libs/bjoining_vis2cuni.o .libs/bjoining_log2cuni.o .libs/bjoining_ye.o -L/usr/local/lib -lfribidi -lutil -O2 libtool: link: ar cru .libs/libbjoining.a bjoining_compose.o bjoining_charprop.o bjoining_vis2cuni.o bjoining_log2cuni.o bjoining_ye.o libtool: link: ranlib .libs/libbjoining.a libtool: link: ( cd ".libs" && rm -f "libbjoining.la" && ln -s "../libbjoining.la" "libbjoining.la" ) gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT bjoining_vu.o -MD -MP -MF .deps/bjoining_vu.Tpo -c -o bjoining_vu.o bjoining_vu.c mv -f .deps/bjoining_vu.Tpo .deps/bjoining_vu.Po /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o bjoining_vu bjoining_vu.o libbjoining.la -L/usr/local/lib -lfribidi -lutil libtool: link: gcc -g -O2 -Wall -pedantic -o .libs/bjoining_vu bjoining_vu.o -L./.libs -lbjoining -L/usr/local/lib -lfribidi -lutil -Wl,-rpath,/usr/local/lib/bicon -Wl,-rpath,/usr/local/lib /usr/local/lib/libfribidi.so.2.0: warning: sprintf() is often misused, please use snprintf() gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT msye.o -MD -MP -MF .deps/msye.Tpo -c -o msye.o msye.c mv -f .deps/msye.Tpo .deps/msye.Po /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o msye msye.o libbjoining.la -L/usr/local/lib -lfribidi -lutil libtool: link: gcc -g -O2 -Wall -pedantic -o .libs/msye msye.o -L./.libs -lbjoining -L/usr/local/lib -lfribidi -lutil -Wl,-rpath,/usr/local/lib/bicon -Wl,-rpath,/usr/local/lib /usr/local/lib/libfribidi.so.2.0: warning: sprintf() is often misused, please use snprintf() gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -g -O2 -Wall -pedantic -MT fixpersianye.o -MD -MP -MF .deps/fixpersianye.Tpo -c -o fixpersianye.o fixpersianye.c mv -f .deps/fixpersianye.Tpo .deps/fixpersianye.Po /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o fixpersianye fixpersianye.o libbjoining.la -L/usr/local/lib -lfribidi -lutil libtool: link: gcc -g -O2 -Wall -pedantic -o .libs/fixpersianye fixpersianye.o -L./.libs -lbjoining -L/usr/local/lib -lfribidi -lutil -Wl,-rpath,/usr/local/lib/bicon -Wl,-rpath,/usr/local/lib /usr/local/lib/libfribidi.so.2.0: warning: sprintf() is often misused, please use snprintf() git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bjoining' Making all in bconsole gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bconsole' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_ligature.lo -MD -MP -MF .deps/bconsole_ligature.Tpo -c -o bconsole_ligature.lo bconsole_ligature.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_ligature.lo -MD -MP -MF .deps/bconsole_ligature.Tpo -c bconsole_ligature.c -fPIC -DPIC -o .libs/bconsole_ligature.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_ligature.lo -MD -MP -MF .deps/bconsole_ligature.Tpo -c bconsole_ligature.c -o bconsole_ligature.o >/dev/null 2>&1 mv -f .deps/bconsole_ligature.Tpo .deps/bconsole_ligature.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_log2con.lo -MD -MP -MF .deps/bconsole_log2con.Tpo -c -o bconsole_log2con.lo bconsole_log2con.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_log2con.lo -MD -MP -MF .deps/bconsole_log2con.Tpo -c bconsole_log2con.c -fPIC -DPIC -o .libs/bconsole_log2con.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_log2con.lo -MD -MP -MF .deps/bconsole_log2con.Tpo -c bconsole_log2con.c -o bconsole_log2con.o >/dev/null 2>&1 mv -f .deps/bconsole_log2con.Tpo .deps/bconsole_log2con.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o libbconsole.la -rpath /usr/local/lib/bicon bconsole_ligature.lo bconsole_log2con.lo ../bjoining/libbjoining.la -L/usr/local/lib -lfribidi -lutil libtool: link: gcc -shared -fPIC -DPIC -o .libs/libbconsole.so.0.0 .libs/bconsole_ligature.o .libs/bconsole_log2con.o -L../bjoining/.libs -lbjoining -L/usr/local/lib -lfribidi -lutil -O2 libtool: link: ar cru .libs/libbconsole.a bconsole_ligature.o bconsole_log2con.o libtool: link: ranlib .libs/libbconsole.a libtool: link: ( cd ".libs" && rm -f "libbconsole.la" && ln -s "../libbconsole.la" "libbconsole.la" ) gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -g -O2 -Wall -pedantic -MT bconsole_vu.o -MD -MP -MF .deps/bconsole_vu.Tpo -c -o bconsole_vu.o bconsole_vu.c mv -f .deps/bconsole_vu.Tpo .deps/bconsole_vu.Po /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o bconsole_vu bconsole_vu.o libbconsole.la -lutil libtool: link: gcc -g -O2 -Wall -pedantic -o .libs/bconsole_vu bconsole_vu.o -L/home/akaay/gitprojects/bicon/bjoining/.libs -L./.libs -lbconsole -L/usr/local/lib -lbjoining -lfribidi -lutil -Wl,-rpath,/usr/local/lib/bicon -Wl,-rpath,/usr/local/lib /usr/local/lib/libfribidi.so.2.0: warning: sprintf() is often misused, please use snprintf() git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bconsole' Making all in bicon gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bicon' gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -I../bconsole -g -O2 -Wall -pedantic -MT bicon_bin-bicon.o -MD -MP -MF .deps/bicon_bin-bicon.Tpo -c -o bicon_bin-bicon.o `test -f 'bicon.c' || echo './'`bicon.c mv -f .deps/bicon_bin-bicon.Tpo .deps/bicon_bin-bicon.Po gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -I../bconsole -g -O2 -Wall -pedantic -MT bicon_bin-bicon_read.o -MD -MP -MF .deps/bicon_bin-bicon_read.Tpo -c -o bicon_bin-bicon_read.o `test -f 'bicon_read.c' || echo './'`bicon_read.c bicon_read.c: In function 'bicon_read': bicon_read.c:202: warning: pointer targets in passing argument 1 of 'strcmp' differ in signedness mv -f .deps/bicon_bin-bicon_read.Tpo .deps/bicon_bin-bicon_read.Po gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/local/include -I/usr/local/include/fribidi -I../bjoining -I../bconsole -g -O2 -Wall -pedantic -MT bicon_bin-pty_spawn.o -MD -MP -MF .deps/bicon_bin-pty_spawn.Tpo -c -o bicon_bin-pty_spawn.o `test -f 'pty_spawn.c' || echo './'`pty_spawn.c pty_spawn.c: In function '_copy': pty_spawn.c:129: warning: 'return' with no value, in function returning non-void pty_spawn.c:160: warning: 'return' with no value, in function returning non-void pty_spawn.c:167: warning: 'return' with no value, in function returning non-void mv -f .deps/bicon_bin-pty_spawn.Tpo .deps/bicon_bin-pty_spawn.Po /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -pedantic -o bicon.bin bicon_bin-bicon.o bicon_bin-bicon_read.o bicon_bin-pty_spawn.o -L/usr/local/lib -lfribidi ../bconsole/libbconsole.la ../bjoining/libbjoining.la -lutil libtool: link: gcc -g -O2 -Wall -pedantic -o .libs/bicon.bin bicon_bin-bicon.o bicon_bin-bicon_read.o bicon_bin-pty_spawn.o -L/home/akaay/gitprojects/bicon/bjoining/.libs -L/usr/local/lib -L../bconsole/.libs -lbconsole -L../bjoining/.libs -lbjoining -lfribidi -lutil -Wl,-rpath,/usr/local/lib/bicon -Wl,-rpath,/usr/local/lib /usr/local/lib/libfribidi.so.2.0: warning: sprintf() is often misused, please use snprintf() git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bicon' Making all in keymap gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/keymap' gzip --best -c ir.map > ir.map.gz gzip --best -c arabic.map > arabic.map.gz Creating symlink for ae.map.gz succeeded Creating symlink for bh.map.gz succeeded Creating symlink for dz.map.gz succeeded Creating symlink for eg.map.gz succeeded Creating symlink for iq.map.gz succeeded Creating symlink for jo.map.gz succeeded Creating symlink for kw.map.gz succeeded Creating symlink for lb.map.gz succeeded Creating symlink for ly.map.gz succeeded Creating symlink for ma.map.gz succeeded Creating symlink for om.map.gz succeeded Creating symlink for qa.map.gz succeeded Creating symlink for sa.map.gz succeeded Creating symlink for sd.map.gz succeeded Creating symlink for sy.map.gz succeeded Creating symlink for tn.map.gz succeeded Creating symlink for ye.map.gz succeeded git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/keymap' Making all in font gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/font' cat bicon-ascii.sub-sfm bicon-arabic.sub-sfm bicon-nomarks.sub-sfm > bicon-8x16-512.sfm cat bicon-ascii.sub-sfm bicon-arabic.sub-sfm bicon-marks.sub-sfm > bicon-8x16-512-marks.sfm ln -s bicon-8x16-512.sfm bicon-8x16-512-ltr.sfm ln -s bicon-8x16-512-marks.sfm bicon-8x16-512-marks-ltr.sfm git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/font' Making all in bin gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bin' sed -e 's,@datadir\@,/usr/local/share/bicon,g' -e 's,@bindir\@,/usr/local/bin,g' -e 's,@PACKAGE_NAME\@,BiCon,g' -e 's,@PACKAGE\@,bicon,g' -e 's,@VERSION\@,0.4,g' ./bicon.in > bicon chmod +x bicon git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bin' Making all in doc gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/doc' Making all in man gmake[3]: Entering directory '/home/akaay/gitprojects/bicon/doc/man' git.mk: Generating .gitignore gmake[3]: Leaving directory '/home/akaay/gitprojects/bicon/doc/man' gmake[3]: Entering directory '/home/akaay/gitprojects/bicon/doc' gmake[3]: Nothing to be done for 'all-am'. gmake[3]: Leaving directory '/home/akaay/gitprojects/bicon/doc' git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/doc' Making all in testtext gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/testtext' git.mk: Generating .gitignore gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/testtext' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon' # gmake install Making install in bjoining gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/bjoining' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bjoining' .././install-sh -c -d '/usr/local/lib/bicon' /bin/sh ../libtool --mode=install /usr/bin/install -c libbjoining.la '/usr/local/lib/bicon' libtool: install: /usr/bin/install -c -m 644 .libs/libbjoining.so.0.0 /usr/local/lib/bicon/libbjoining.so.0.0 libtool: install: /usr/bin/install -c -m 644 .libs/libbjoining.lai /usr/local/lib/bicon/libbjoining.la libtool: install: /usr/bin/install -c .libs/libbjoining.a /usr/local/lib/bicon/libbjoining.a libtool: install: chmod 644 /usr/local/lib/bicon/libbjoining.a libtool: install: ranlib -t /usr/local/lib/bicon/libbjoining.a libtool: finish: PATH="/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/sbin" ldconfig -m /usr/local/lib/bicon .././install-sh -c -d '/usr/local/include/bicon' /usr/bin/install -c -m 644 bjoining_compose.h bjoining_charprop.h bjoining_vis2cuni.h bjoining_log2cuni.h bjoining_ye.h bjoining.h '/usr/local/include/bicon' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bjoining' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/bjoining' Making install in bconsole gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/bconsole' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bconsole' .././install-sh -c -d '/usr/local/lib/bicon' /bin/sh ../libtool --mode=install /usr/bin/install -c libbconsole.la '/usr/local/lib/bicon' libtool: install: warning: relinking `libbconsole.la' libtool: install: (cd /home/akaay/gitprojects/bicon/bconsole; /bin/sh /home/akaay/gitprojects/bicon/libtool --tag CC --mode=relink gcc -g -O2 -Wall -pedantic -o libbconsole.la -rpath /usr/local/lib/bicon bconsole_ligature.lo bconsole_log2con.lo ../bjoining/libbjoining.la -L/usr/local/lib -lfribidi -lutil ) libtool: relink: gcc -shared -fPIC -DPIC -o .libs/libbconsole.so.0.0 .libs/bconsole_ligature.o .libs/bconsole_log2con.o -L/usr/local/lib/bicon -lbjoining -L/usr/local/lib -lfribidi -lutil -O2 libtool: install: /usr/bin/install -c -m 644 .libs/libbconsole.so.0.0T /usr/local/lib/bicon/libbconsole.so.0.0 libtool: install: /usr/bin/install -c -m 644 .libs/libbconsole.lai /usr/local/lib/bicon/libbconsole.la libtool: install: /usr/bin/install -c .libs/libbconsole.a /usr/local/lib/bicon/libbconsole.a libtool: install: chmod 644 /usr/local/lib/bicon/libbconsole.a libtool: install: ranlib -t /usr/local/lib/bicon/libbconsole.a libtool: finish: PATH="/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/sbin" ldconfig -m /usr/local/lib/bicon .././install-sh -c -d '/usr/local/include/bicon' /usr/bin/install -c -m 644 bconsole_ligature.h bconsole_log2con.h bconsole.h '/usr/local/include/bicon' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bconsole' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/bconsole' Making install in bicon gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/bicon' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bicon' .././install-sh -c -d '/usr/local/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c bicon.bin '/usr/local/bin' libtool: install: /usr/bin/install -c .libs/bicon.bin /usr/local/bin/bicon.bin gmake[2]: Nothing to be done for 'install-data-am'. gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bicon' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/bicon' Making install in keymap gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/keymap' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/keymap' gmake[2]: Nothing to be done for 'install-exec-am'. .././install-sh -c -d '/usr/local/share/bicon/keymap' /usr/bin/install -c -m 644 ir.map.gz arabic.map.gz '/usr/local/share/bicon/keymap' gmake install-data-hook gmake[3]: Entering directory '/home/akaay/gitprojects/bicon/keymap' Creating symlink for ae.map.gz succeeded Creating symlink for bh.map.gz succeeded Creating symlink for dz.map.gz succeeded Creating symlink for eg.map.gz succeeded Creating symlink for iq.map.gz succeeded Creating symlink for jo.map.gz succeeded Creating symlink for kw.map.gz succeeded Creating symlink for lb.map.gz succeeded Creating symlink for ly.map.gz succeeded Creating symlink for ma.map.gz succeeded Creating symlink for om.map.gz succeeded Creating symlink for qa.map.gz succeeded Creating symlink for sa.map.gz succeeded Creating symlink for sd.map.gz succeeded Creating symlink for sy.map.gz succeeded Creating symlink for tn.map.gz succeeded Creating symlink for ye.map.gz succeeded gmake[3]: Leaving directory '/home/akaay/gitprojects/bicon/keymap' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/keymap' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/keymap' Making install in font gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/font' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/font' gmake[2]: Nothing to be done for 'install-exec-am'. gmake[2]: Nothing to be done for 'install-data-am'. gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/font' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/font' Making install in bin gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/bin' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/bin' .././install-sh -c -d '/usr/local/bin' /usr/bin/install -c bicon '/usr/local/bin' gmake[2]: Nothing to be done for 'install-data-am'. gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/bin' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/bin' Making install in doc gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/doc' Making install in man gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/doc/man' gmake[3]: Entering directory '/home/akaay/gitprojects/bicon/doc/man' gmake[3]: Nothing to be done for 'install-exec-am'. ../.././install-sh -c -d '/usr/local/share/man/man1' /usr/bin/install -c -m 644 bicon.bin.1 bicon.1 '/usr/local/share/man/man1' gmake[3]: Leaving directory '/home/akaay/gitprojects/bicon/doc/man' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/doc/man' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/doc' gmake[3]: Entering directory '/home/akaay/gitprojects/bicon/doc' gmake[3]: Nothing to be done for 'install-exec-am'. gmake[3]: Nothing to be done for 'install-data-am'. gmake[3]: Leaving directory '/home/akaay/gitprojects/bicon/doc' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/doc' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/doc' Making install in testtext gmake[1]: Entering directory '/home/akaay/gitprojects/bicon/testtext' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon/testtext' gmake[2]: Nothing to be done for 'install-exec-am'. gmake[2]: Nothing to be done for 'install-data-am'. gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon/testtext' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon/testtext' gmake[1]: Entering directory '/home/akaay/gitprojects/bicon' gmake[2]: Entering directory '/home/akaay/gitprojects/bicon' gmake[2]: Nothing to be done for 'install-exec-am'. ./install-sh -c -d '/usr/local/lib/pkgconfig' /usr/bin/install -c -m 644 bicon.pc '/usr/local/lib/pkgconfig' gmake[2]: Leaving directory '/home/akaay/gitprojects/bicon' gmake[1]: Leaving directory '/home/akaay/gitprojects/bicon' # Script done on Wed Mar 4 12:09:25 2015 canto shows rtl rss correctly and snownews as well but I needed to change browser to elinks. Quote:
Thanks again ibara ! Last edited by pawaan; 5th March 2015 at 12:56 PM. Reason: + snownews , canto |
Thread Tools | |
Display Modes | |
|
|