DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Packages and Ports

OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD.

Reply
 
Thread Tools Display Modes
Old 4 Days Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

Hello puffymon,
with the parameter "machdep.allowaperture = 1" I have Gnome display but in the parameters it does not recognize the screen and moving windows in the Gnome is very slow I think it lacks some parameters for optimize display !
Reply With Quote
Old 4 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

I'm not sure, but maybe you don't have 2D acceleration. Does Xorg.0.log mention something?
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 4 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

BTW, I had a lack of 2D acceleration in my unsupported radeon graphics card (Kaveri APU R7), but my desktop wasn't so slow, only 2D games were slow (for example, supertux). Try to start X with it's default configuration (if you didn't allready, that means remove your manual configuration). Also that may be a GNOME bug, does that happen if you start any other desktop?
BTW, I forgot to tell what exactly "allowapperture" does: http://man.openbsd.org/xf86
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$

Last edited by puffymon; 4 Days Ago at 10:07 PM.
Reply With Quote
Old 4 Days Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

I use other operating system, linux and BSD, under linux no problems (debian 9.1, centos 7).
BSD is an HPC of 16 cores 12giga of ram and 5 tera of HDD, good machine to compile big programs, you would find if joined my / var / log / Xorg .0.log of OpenBSD, thank you for your help!

Code:
[    23.317] (--) checkDevMem: using aperture driver /dev/xf86
[    23.330] (--) Using wscons driver on /dev/ttyC4
[    23.385] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    23.385] X Protocol Version 11, Revision 0
[    23.385] Build Operating System: OpenBSD 6.1 i386 
[    23.385] Current Operating System: OpenBSD hpc-hapocalipse.my.domain 6.1 GENERIC.MP#291 i386
[    23.385] Build Date: 01 April 2017  02:13:40PM
[    23.385]  
[    23.385] Current version of pixman: 0.34.0
[    23.385] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    23.385] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.385] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 21 21:08:55 2017
[    23.423] (==) Using config file: "/etc/X11/xorg.conf"
[    23.423] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[    23.437] (==) No Layout section.  Using the first Screen section.
[    23.438] (==) No screen section available. Using defaults.
[    23.438] (**) |-->Screen "Default Screen Section" (0)
[    23.438] (**) |   |-->Monitor "<default monitor>"
[    23.439] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    23.439] (**) |   |-->Device "Mga"
[    23.439] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    23.439] (==) Disabling SIGIO handlers for input devices
[    23.440] (==) Automatically adding devices
[    23.440] (==) Automatically enabling devices
[    23.440] (==) Not automatically adding GPU devices
[    23.440] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.537] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[    23.537] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    23.537] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    23.537] (II) Loader magic: 0x36700020
[    23.537] (II) Module ABI versions:
[    23.537] 	X.Org ANSI C Emulation: 0.4
[    23.537] 	X.Org Video Driver: 20.0
[    23.537] 	X.Org XInput driver : 22.1
[    23.537] 	X.Org Server Extension : 9.0
[    23.538] (--) PCI:*(0:3:0:0) 102b:0522:103c:31fa rev 2, Mem @ 0xf9000000/16777216, 0xfbcfc000/16384, 0xfb000000/8388608, BIOS @ 0x????????/65536
[    23.538] (II) LoadModule: "glx"
[    23.556] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    23.602] (II) Module glx: vendor="X.Org Foundation"
[    23.602] 	compiled for 1.18.4, module version = 1.0.0
[    23.602] 	ABI class: X.Org Server Extension, version 9.0
[    23.602] (==) AIGLX enabled
[    23.602] (II) LoadModule: "mga"
[    23.603] (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.so
[    23.607] (II) Module mga: vendor="X.Org Foundation"
[    23.607] 	compiled for 1.18.4, module version = 1.6.5
[    23.607] 	Module class: X.Org Video Driver
[    23.607] 	ABI class: X.Org Video Driver, version 20.0
[    23.607] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
	mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
	mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200 eW3 Nuvoton,
	mgag200eH, mgag400, mgag550
[    23.607] (II) Loading sub module "vgahw"
[    23.607] (II) LoadModule: "vgahw"
[    23.609] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[    23.616] (II) Module vgahw: vendor="X.Org Foundation"
[    23.616] 	compiled for 1.18.4, module version = 0.1.0
[    23.616] 	ABI class: X.Org Video Driver, version 20.0
[    23.616] (--) MGA(0): Chipset: "mgag200 SE A PCI"
[    23.616] (II) MGA(0): HW cursor is not supported with video redirection onG200 server chips.
 If you don't intend to use video redirection enable with Option "HWCursor" "On"
[    23.616] xf86TokenToOptinfo: table is NULL
[    23.616] xf86TokenToOptinfo: table is NULL
[    23.616] (==) MGA(0): Using SW cursor
[    23.616] (--) MGA(0): Linear framebuffer at 0xF9000000
[    23.616] (--) MGA(0): MMIO registers at 0xFBCFC000
[    23.616] (--) MGA(0): Pseudo-DMA transfer window at 0xFB000000
[    23.616] (II) MGA(0): MAPPED Framebuffer F9000000 400000 to 76D25000.
[    23.617] (II) MGA(0): UNMAPPING framebuffer 0x76D25000, 0x400000.
[    23.617] (II) MGA(0): MAPPED Framebuffer F9000000 1000000 to FFFFFFFF8611E000.
[    25.942] (II) MGA(0): UNMAPPING framebuffer 0xFFFFFFFF8611E000, 0x1000000.
[    25.942] (II) MGA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    25.942] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[    25.942] (==) MGA(0): RGB weight 888
[    25.942] (II) MGA(0): Disabling MTRR support.
[    25.943] (==) MGA(0): Using XAA acceleration
[    26.094] (WW) MGA(0): Video BIOS info block not detected!
[    26.094] (--) MGA(0): VideoRAM: 8128 kByte
[    26.094] (II) Loading sub module "ddc"
[    26.094] (II) LoadModule: "ddc"
[    26.094] (II) Module "ddc" already built-in
[    26.094] (II) Loading sub module "i2c"
[    26.094] (II) LoadModule: "i2c"
[    26.094] (II) Module "i2c" already built-in
[    26.094] (II) MGA(0): MAPPED Framebuffer F9000000 7f0000 to 79C2E000.
[    26.094] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    26.454] (II) MGA(0): I2C bus "DDC P1" initialized.
[    26.454] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[    26.518] (II) MGA(0): I2C monitor info
[    26.518] (II) MGA(0): Manufacturer: ACR  Model: c  Serial#: 1937773021
[    26.518] (II) MGA(0): Year: 2007  Week: 38
[    26.518] (II) MGA(0): EDID Version: 1.3
[    26.518] (II) MGA(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    26.518] (II) MGA(0): Sync:  Separate
[    26.518] (II) MGA(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    26.518] (II) MGA(0): Gamma: 2.20
[    26.518] (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    26.518] (II) MGA(0): First detailed timing is preferred mode
[    26.518] (II) MGA(0): redX: 0.636 redY: 0.349   greenX: 0.290 greenY: 0.589
[    26.518] (II) MGA(0): blueX: 0.143 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
[    26.518] (II) MGA(0): Supported established timings:
[    26.518] (II) MGA(0): 720x400@70Hz
[    26.518] (II) MGA(0): 640x480@60Hz
[    26.518] (II) MGA(0): 640x480@67Hz
[    26.518] (II) MGA(0): 640x480@72Hz
[    26.518] (II) MGA(0): 640x480@75Hz
[    26.518] (II) MGA(0): 800x600@56Hz
[    26.518] (II) MGA(0): 800x600@60Hz
[    26.518] (II) MGA(0): 800x600@72Hz
[    26.518] (II) MGA(0): 800x600@75Hz
[    26.518] (II) MGA(0): 832x624@75Hz
[    26.518] (II) MGA(0): 1024x768@60Hz
[    26.518] (II) MGA(0): 1024x768@70Hz
[    26.518] (II) MGA(0): 1024x768@75Hz
[    26.518] (II) MGA(0): 1280x1024@75Hz
[    26.518] (II) MGA(0): 1152x864@75Hz
[    26.518] (II) MGA(0): Manufacturer's mask: 10
[    26.518] (II) MGA(0): Supported standard timings:
[    26.518] (II) MGA(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    26.518] (II) MGA(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    26.518] (II) MGA(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    26.518] (II) MGA(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    26.518] (II) MGA(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    26.519] (II) MGA(0): Supported detailed timing:
[    26.519] (II) MGA(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    26.519] (II) MGA(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    26.519] (II) MGA(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    26.519] (II) MGA(0): Serial No: LAT0C0144004
[    26.519] (II) MGA(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[    26.519] (II) MGA(0): Monitor name: X193W
[    26.519] (II) MGA(0): EDID (in hex):
[    26.519] (II) MGA(0): 	00ffffffffffff0004720c00dd118073
[    26.519] (II) MGA(0): 	2611010308291a78ead7a5a2594a9624
[    26.519] (II) MGA(0): 	145054bfef909500950f81808140714f
[    26.519] (II) MGA(0): 	0101010101019a29a0d0518422305098
[    26.519] (II) MGA(0): 	36009a001100001c000000ff004c4154
[    26.519] (II) MGA(0): 	3043303134343030340a000000fd0032
[    26.519] (II) MGA(0): 	4b1e520e000a202020202020000000fc
[    26.519] (II) MGA(0): 	0058313933570a20202020202020009c
[    26.519] (II) MGA(0): end of monitor info
[    26.832] (II) MGA(0): UNMAPPING framebuffer 0x79C2E000, 0x7F0000.
[    26.833] (II) MGA(0): EDID vendor "ACR", prod id 12
[    26.833] (II) MGA(0): Using EDID range info for horizontal sync
[    26.833] (II) MGA(0): Using EDID range info for vertical refresh
[    26.833] (II) MGA(0): Printing DDC gathered Modelines:
[    26.833] (II) MGA(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)
[    26.833] (II) MGA(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.833] (II) MGA(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.833] (II) MGA(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    26.833] (II) MGA(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    26.833] (II) MGA(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    26.833] (II) MGA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.833] (II) MGA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    26.833] (II) MGA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    26.833] (II) MGA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    26.833] (II) MGA(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    26.833] (II) MGA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.833] (II) MGA(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    26.833] (II) MGA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    26.833] (II) MGA(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    26.833] (II) MGA(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    26.833] (II) MGA(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    26.833] (II) MGA(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    26.833] (II) MGA(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    26.833] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[    26.833] (==) MGA(0): Min pixel clock is 17 MHz
[    26.833] (--) MGA(0): Max pixel clock is 230 MHz
[    26.833] (II) MGA(0): <default monitor>: Using hsync range of 30.00-82.00 kHz
[    26.833] (II) MGA(0): <default monitor>: Using vrefresh range of 50.00-75.00 Hz
[    26.833] (II) MGA(0): <default monitor>: Using maximum pixel clock of 145.00 MHz
[    26.833] (II) MGA(0): Estimated virtual size for aspect ratio 1.5769 is 1440x900
[    26.833] (II) MGA(0): Clock range:  17.75 to 230.00 MHz
[    26.833] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[    26.833] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[    26.833] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    26.833] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    26.833] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    26.833] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
[    26.833] (II) MGA(0): Not using default mode "1152x864" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1280x960" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1280x960" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[    26.833] (II) MGA(0): Not using default mode "1280x1024" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1280x1024" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1280x1024" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[    26.833] (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "1400x1050" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1400x1050" (height too large for virtual size)
[    26.833] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
[    26.833] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
[    26.833] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
[    26.834] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
[    26.834] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
[    26.834] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth)
[    26.834] (II) MGA(0): Not using driver mode "1440x900" (mode requires too much memory bandwidth)
[    26.834] (II) MGA(0): Not using driver mode "1280x1024" (height too large for virtual size)
[    26.834] (II) MGA(0): Not using driver mode "1152x864" (mode requires too much memory bandwidth)
[    26.834] (II) MGA(0): Not using driver mode "1440x900" (mode requires too much memory bandwidth)
[    26.834] (II) MGA(0): Not using driver mode "1280x1024" (height too large for virtual size)
[    26.834] (II) MGA(0): Not using driver mode "1280x960" (height too large for virtual size)
[    26.834] (WW) MGA(0): Shrinking virtual size estimate from 1440x900 to 1024x768
[    26.834] (--) MGA(0): Has SDRAM
[    26.834] (--) MGA(0): Virtual size is 1024x768 (pitch 1024)
[    26.834] (**) MGA(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[    26.834] (II) MGA(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[    26.834] (II) MGA(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[    26.834] (II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz ez)
[    26.834] (**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[    26.834] (II) MGA(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz zd)
[    26.834] (**) MGA(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[    26.834] (II) MGA(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz zd)
[    26.834] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[    26.834] (II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz zd)
[    26.834] (**) MGA(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[    26.834] (II) MGA(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz ez)
[    26.834] (**) MGA(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[    26.834] (II) MGA(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz zd)
[    26.834] (**) MGA(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz ez)
[    26.834] (**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz zd)
[    26.834] (**) MGA(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz zd)
[    26.834] (**) MGA(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz zd)
[    26.834] (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz zd)
[    26.834] (**) MGA(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz zd)
[    26.834] (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[    26.834] (II) MGA(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz zd)
[    26.834] (**) MGA(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
[    26.834] (II) MGA(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz zd)
[    26.834] (**) MGA(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz zd)
[    26.834] (**) MGA(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[    26.834] (**) MGA(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[    26.834] (**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz ez)
[    26.834] (**) MGA(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz ez)
[    26.834] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz zd)
[    26.834] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz zd)
[    26.834] (**) MGA(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[    26.834] (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[    26.834] (II) MGA(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz zd)
[    26.834] (**) MGA(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[    26.834] (II) MGA(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz ez)
[    26.834] (**) MGA(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[    26.834] (**) MGA(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[    26.834] (**) MGA(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[    26.834] (II) MGA(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[    26.834] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[    26.834] (II) MGA(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[    26.835] (**) MGA(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[    26.835] (II) MGA(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[    26.835] (**) MGA(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[    26.835] (II) MGA(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[    26.835] (**) MGA(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[    26.835] (II) MGA(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[    26.835] (**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[    26.835] (II) MGA(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[    26.835] (**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[    26.835] (II) MGA(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[    26.835] (**) MGA(0): Display dimensions: (410, 260) mm
[    26.835] (**) MGA(0): DPI set to (63, 75)
[    26.835] (II) MGA(0): YDstOrg is set to 0
[    26.835] (II) Loading sub module "fb"
[    26.835] (II) LoadModule: "fb"
[    26.836] (II) Loading /usr/X11R6/lib/modules/libfb.so
[    26.837] (II) Module fb: vendor="X.Org Foundation"
[    26.837] 	compiled for 1.18.4, module version = 1.0.0
[    26.837] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    26.837] (--) Depth 24 pixmap format is 32 bpp
[    26.837] (II) MGA(0): MAPPED Framebuffer F9000000 1000000 to 7966D000.
[    26.837] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    27.403] (--) MGA(0): 64 DWORD fifo
[    27.432] (II) MGA(0): Clock           == 78750
[    27.432] (II) MGA(0): BitsPerPixel    == 32
[    27.432] (II) MGA(0): HiPriLvl        == 03
[    27.441] (==) MGA(0): Default visual is TrueColor
[    27.448] (II) MGA(0): Using -512 lines for offscreen memory.
[    27.448] (==) MGA(0): Backing store enabled
[    27.448] (==) MGA(0): Silken mouse disabled
[    27.450] (==) MGA(0): DPMS enabled
[    27.450] (WW) MGA(0): Option "MTRR" is not used
[    27.451] (==) RandR enabled
[    27.466] (II) AIGLX: Screen 0 is not DRI2 capable
[    27.466] (EE) AIGLX: reverting to software rendering
[    27.563] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.564] (II) AIGLX: Loaded and initialized swrast
[    27.564] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    27.863] (II) config/wscons: checking input device /dev/wskbd
[    27.863] (II) wskbd: using layout fr
[    27.863] (II) LoadModule: "kbd"
[    27.864] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    27.869] (II) Module kbd: vendor="X.Org Foundation"
[    27.869] 	compiled for 1.18.4, module version = 1.9.0
[    27.869] 	Module class: X.Org XInput Driver
[    27.869] 	ABI class: X.Org XInput driver, version 22.1
[    27.869] (II) Using input driver 'kbd' for '/dev/wskbd'
[    27.869] (**) /dev/wskbd: always reports core events
[    27.869] (**) /dev/wskbd: always reports core events
[    27.869] (**) Option "Protocol" "standard"
[    27.869] (**) Option "XkbRules" "base"
[    27.869] (**) Option "XkbModel" "pc105"
[    27.869] (**) Option "XkbLayout" "fr"
[    27.869] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[    27.953] (II) config/wscons: checking input device /dev/wsmouse
[    27.953] (II) LoadModule: "ws"
[    27.954] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    27.955] (II) Module ws: vendor="X.Org Foundation"
[    27.955] 	compiled for 1.18.4, module version = 1.3.0
[    27.955] 	Module class: X.Org XInput Driver
[    27.955] 	ABI class: X.Org XInput driver, version 22.1
[    27.955] (II) Using input driver 'ws' for '/dev/wsmouse'
[    27.955] (**) /dev/wsmouse: always reports core events
[    27.955] (II) ws: /dev/wsmouse: debuglevel 0
[    27.955] (**) Option "Device" "/dev/wsmouse"
[    27.955] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    27.955] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    27.955] (**) ws: /dev/wsmouse: associated screen: 0
[    27.958] (II) ws: /dev/wsmouse: minimum x position: 0
[    27.958] (II) ws: /dev/wsmouse: maximum x position: 1023
[    27.958] (II) ws: /dev/wsmouse: minimum y position: 0
[    27.958] (II) ws: /dev/wsmouse: maximum y position: 767
[    27.958] (==) ws: /dev/wsmouse: Buttons: 7
[    27.993] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    27.993] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[    27.996] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    27.996] (**) /dev/wsmouse: (accel) acceleration profile 0
[    27.996] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    27.996] (**) /dev/wsmouse: (accel) acceleration threshold: 4
Reply With Quote
Old 4 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

Quote:
Originally Posted by philo_neo71 View Post
Code:
[    27.466] (II) AIGLX: Screen 0 is not DRI2 capable
[    27.466] (EE) AIGLX: reverting to software rendering
The same error I get at my radeon graphics card, you don't have 2D acceleration. It looks like your graphics card is not supported.
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 4 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

Hm, maybe there's a chance to get support for this graphics card. Send a mail to misc@openbsd.org: write a message like "Hi. Why my Matrox MGA G200 is not supported?" and insert your full dmesg output, full sysctl output and full Xorg.0.log in that message. Note that you should send plain text and write 72 characters per line (dmesg and sysctl outputs and Xorg.0.log are exceptions). The subject should be like "Is Matrox G200 supported?" or "Matrox G200 support" or "Matrox G200: AIGLX: reverting to software rendering". The reason why they don't support that graphics card may be diffrent: irrelevant device (but I don't think this graphics card is irrelevant, because you have it), vendor didn't document device and provides blobs, vendor didn't document device and don't provide firmware, it's driver is distributed under GNU GPL license and so on.
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 4 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

BTW, why whould you run i386 OpenBSD at such machine? Why not amd64 OpenBSD?
Anyway I don't think switching to amd64 OpenBSD would fix your graphics card problem, I recommend to use another videocard or FreeBSD or NetBSD (DragonFlyBSD is an option, but I don't like the way it provides packages)
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 3 Days Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

The HPC is provided with a 16x PCI Express port, but for Stata3 raid cards, I can not mount video cards because the north and south chipsets are not intended to work with an additional graphics card.
Given the official data of the Proliant ML150 G6, the datasheet is not intended to work with video cards, otherwise I damage my, motherboard.
So I have to do with my "Matrox MGA G200e" card which is soldered into the motherboard!
Reply With Quote
Old 3 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

Did you write the issue to misc@openbsd.org? Right now there are only 10 solutions: use minimal GUI (OpenBSD provides keyboard-friendly cwm(1) in base, I love it) or use another *BSD
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 2 Days Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

hello, yes I wrote a misc@openbsd.org!
the procedure is a long one but it is done!
Reply With Quote
Old 2 Days Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

for Mr puffymon :
I wrote a message as you told me, but I do not know how to format my message for it to be processed by the OpenBSD robots, can make me a "frame" of message that I know what to send ?


Result Email :
Quote:
Le samedi 23 septembre 2017 à 00:32 -0600, owner-majordomo@openbsd.org
a écrit :
> > > > > "Why is my Matrox MGA G200e not supported?" on a proliant
> > > > > ML150 G6,
>
> The command ""Why" is invalid.
>
> Use the "help topics" command to see a list of valid commands.
>
> Discarded 7 line(s) of unrecognized text.
>
>
> Valid commands processed: 0
> 0 succeeded, 0 stalled, and 0 failed.
>
>
> Use the following command:
> sessioninfo 847955251d57d8e4b6d46597815b9ed2f5467460
> to see technical information about this session.
>
> > > > > OpenBSD 6.1 (GENERIC.MP) #291: Sat Apr 1 13:53:41 MDT 2017
>
> The command "OpenBSD" is invalid.
>
> Use the "help topics" command to see a list of valid commands.
>
> Discarded 303 line(s) of unrecognized text.
>
>
> Valid commands processed: 0
> 0 succeeded, 0 stalled, and 0 failed.
>
>
> Use the following command:
> sessioninfo 847955251d57d8e4b6d46597815b9ed2f5467460
> to see technical information about this session.
>
> > > > > kern.ostype=OpenBSD
>
> The command "kern.ostype" is invalid.
>
> Use the "help topics" command to see a list of valid commands.
>
> Discarded 579 line(s) of unrecognized text.
>
>
> Valid commands processed: 0
> 0 succeeded, 0 stalled, and 0 failed.
>
>
> Use the following command:
> sessioninfo 847955251d57d8e4b6d46597815b9ed2f5467460
> to see technical information about this session.
>
> > > > > [ 26.461] (--) checkDevMem: using aperture driver
> > > > > /dev/xf86
>
> The command "[" is invalid.
>
> Use the "help topics" command to see a list of valid commands.
>
> Discarded 400 line(s) of unrecognized text.
>
>
> Valid commands processed: 0
> 0 succeeded, 0 stalled, and 0 failed.
>
>
> Use the following command:
> sessioninfo 847955251d57d8e4b6d46597815b9ed2f5467460
> to see technical information about this session.
>
Reply With Quote
Old 2 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

lol, I've read your message and it looks... weird
anyway you've allready got an answer: https://marc.info/?l=openbsd-misc&m=150615418409402&w=2
Quote:
As Xenocara tracks Xorg then this may be related to this bug only
recently fixed in Linux systems

https://bugs.launchpad.net/ubuntu/+s...r/+bug/1316035
So it looks like your graphics card is supported by kernel, just wait when the bug will be fixed in Xenocara. You may try snapshot (maybe they've allready fixed that bug): https://ftp.openbsd.org/pub/OpenBSD/snapshots/
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 2 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

In that message I think you didn't undersand what is the subject. The subject is the name of the thread, for example the subject of this thread is "xfce4 issue". You named that mail "Is Matrox G200e supported?" and that's ok, but I don't understand why would you put in the message diffrent subject names
Also note that you write a message for people, not bots (but that people use simple mail clients, for example, mutt), it looked understandable, but looked as if it was written by bot
Ok, here's my format (don't write it to them, they've allready answered you, writting the same message is insult):
Hi! It seems that my graphics card Matrox G200e is not supported.
I lack 2D acceleration and 3D accelerations, my desktop is literally
unusable because everything is incrediply slow.
So my question is why you don't support MGA G200?
Here's my dmesg, sysctl and Xorg.0.log:
...
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 2 Days Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

i have installed the ports but i don't found the way of port for compiling modprobe, have you know where modprobe's port ? /usr/ports/.....

I'm sorry but it was not my purpose to insult the people of openBSD lol

Last edited by philo_neo71; 2 Days Ago at 01:38 AM.
Reply With Quote
Old 2 Days Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

You didn't write the same (are you learning English?) message to them so you didn't insult. I mean the person which posts questions in mailing lists which allready have answers in man pages or FAQ or the mailing list itself is a person which doesn't make research, in that case they will ignore you or if you are lucky they will give you a link to man page, FAQ or mailing list.
cd /usr/ports
make search key=modprobe
You won't see anything in return because modprobe is not ported to OpenBSD.
BTW, reading https://www.OpenBSD.org/faq/ and https://man.OpenBSD.org/ will make more things clear. I recommend to start from whatis(1) and apropos(1)
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Old 1 Day Ago
philo_neo71 philo_neo71 is offline
Package Pilot
 
Join Date: Jul 2009
Posts: 205
Default

Hello Mr. Puffymon,
yes I can not hide anything, indeed I learn English, and above all the difference between oral and written, because there is a difference for these two occurrences, to say I am always at my age learning to graduate and certifications, not easy to express on an unsafe site no https.
Finally I have nothing to hide I am not a hacker!
It is true that I was not very professional with the people of OpenBSD, but it is due to the fatigue and hours of solitudes ahead of the computers!
I will try the commands you sent me (cd / usr / ports make search key = modprobe), on my HPC, I would delight you with a summary of that.

Regards
Philippe
Reply With Quote
Old 1 Day Ago
puffymon puffymon is offline
Real Name: Leonid
Port Guard
 
Join Date: Apr 2017
Location: Earth
Posts: 25
Default

First, I couldn't find modprobe in ports.
Second, OpenBSD community is really a culture shock
Third, don't say you have nothing to hide, because that also means you don't hide your passwords and anyone can use your account.
Forth, if you use console, you're allready a hacker
Fifth, if you want to find a port by keyword, just go to your ports directory and type make search key=... where ... is what you want to find. Try, for example, make search key=tor
__________________
$ uname -a
OpenBSD puffy.pc 6.2 GENERIC.MP#98 amd64
$
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
xfce4 issue philo_neo71 NetBSD Package System (pkgsrc) 5 1 Week Ago 05:37 AM
xfce4 work fine, but gnome issue philo_neo71 OpenBSD Packages and Ports 10 9th September 2016 01:12 AM
xfce4 issue on sun blade philo_neo71 NetBSD Package System (pkgsrc) 1 30th May 2016 02:56 AM
OpenBSD xfce4 kaschei OpenBSD General 5 28th June 2009 08:45 PM
XFCE4 on 7.0 TMD3 FreeBSD Ports and Packages 3 26th July 2008 03:22 AM


All times are GMT. The time now is 12:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick