|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
My iBook G4 is so happy with Puffy :-)
Theo & Puffy Team : Thank you so much !! dmesg: Code:
[ using 501268 bytes of bsd ELF symbol table ] console out [ATY,Via_A]console in [keyboard] , using ADB using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.3 (GENERIC) #36: Tue Mar 12 20:52:24 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 1342177280 (1280MB) avail mem = 1287770112 (1228MB) mainbus0 at root: model PowerBook6,5 cpu0 at mainbus0: 7447A (Revision 0x101): 1066 MHz: 512KB L2 cache mem0 at mainbus0 spdmem0 at mem0: no EEPROM found spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5 memc0 at mainbus0: uni-n rev 0xd2 "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 adt0 at iic0 addr 0xae: adt7467 rev 0x71 mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 appleagp0 at pchb0 agp0 at appleagp0: aperture at 0x0, size 0x10000000 vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address 00:0d:93:ee:95:91 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 "modem-reset" at macgpio0 offset 0x1d not configured "modem-power" at macgpio0 offset 0x1c not configured macgpio1 at macgpio0 offset 0x9 irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured dfs0 at macgpio0 offset 0x6b: speeds: 1066, 533 MHz "gpio4" at macgpio0 offset 0x1e not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons apm0 at adb0: battery flags 0x5, 0% charged piic0 at adb0 iic1 at piic0 "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8123, CA0T> ATAPI 5/cdrom removable cd0(wdc0:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci2: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci3: USB revision 1.0 uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci4: USB revision 1.0 uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <HTS421260H9AT00> wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:b3:df:b0 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd root on wd0a (5bf2d6abe0cbee49.a) swap on wd0b dump on wd0b WARNING: / was not properly unmounted WARNING: clock lost 9822 days, using FS time -- CHECK AND RESET THE DATE! rum0 at uhub0 port 1 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e ehci_idone: ex=0xe010cc00 is done! rum0 detached umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr 2 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable serial.0951160300000000022B sd0: 953MB, 512 bytes/sector, 1952768 sectors sd0 detached scsibus3 detached umass0 detached umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr 2 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable serial.0951160300000000022B sd0: 953MB, 512 bytes/sector, 1952768 sectors Code:
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured Last edited by daemonfowl; 21st March 2013 at 12:49 AM. Reason: +bwi issue |
|
|||
So I listed my hardware setups running OpenBSD in this thread back in 2010 when I was starting out. Since then, I have moved away from the older single-core Athlon XP CPUs (except my trusty XP 2900) and replaced my dev setup with Core2Quad Q8200 & Core2Duo E8400 machines.
With these I am running pf along with DHCP & BIND and wireless on a separate subnet. I have added Squid & SquidGuard to the mix and I am currently evaluating NoSQL dBs to add. So here is the current list - all running OpenBSD 5.2 / i386: Physical boxes: Core2Quad Q8200 w/4GB + 128GB SSD - this is my ports build box Core2Duo E8400 w/4GB + 40GB SSD + Syba Dual-GigabitE NIC + wireless - firewall Celeron 847 (Sandy Bridge 1.1GHz) m-ITX w/Dual-GigabitE NIC + wireless + 6GB SATA SSD - firewall appliance dev This thing is really fast when it comes to disk I/O. The other Core2 boxes have 3GB SATA and only 1 has AHCI. When I do a squidGuard dB rebuild - systat reports about 30M/s on mechanical HDD (takes 20+ min) and 60MB/s on SSD (takes 8-10min). The E8400 will do 115MB/s sustaned during the rebuild (takes about 2min). When I get to the Cel 847 mentioned above with 6GB SATA and AHCI - I get 180MB/s sustained during the dB rebuild (takes 1m 10sec). Quite impressive indeed. Last edited by zizzo; 21st March 2013 at 12:14 PM. |
|
|||
My current hw:
over powered firewall acting as 'AIO-server' em0 connected to vhdsl2 modem with 100/10 connection, em1 1gb switch for local net, and run0 as a backup connection into 4g lte modem. I plugged in re0 for testing only, and forgot it there. Code:
OpenBSD 5.3-current (GENERIC.MP) #0: Tue Apr 23 23:25:31 EEST 2013 root@tfort.local.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2120810496 (2022MB) avail mem = 2056704000 (1961MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.2 @ 0xf0800 (39 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/17/2008 bios0: OEM OEM acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP MCFG APIC SSDT acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S5) UAR2(S5) IGBE(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC1(S3) EHC2(S3) AZAL(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2400.37 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 309MHz cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2784.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu1: 4MB 64b/line 16-way L2 cache cpu2 at mainbus0: apid 3 (application processor) cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2784.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu2: 4MB 64b/line 16-way L2 cache cpu3 at mainbus0: apid 1 (application processor) cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2784.00 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu3: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX0) acpiprt2 at acpi0: bus 2 (PEX1) acpiprt3 at acpi0: bus 3 (PEX2) acpiprt4 at acpi0: bus -1 (PEX3) acpiprt5 at acpi0: bus -1 (PEX4) acpiprt6 at acpi0: bus -1 (PEX5) acpiprt7 at acpi0: bus 4 (HUB0) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS acpitz0 at acpi0: critical temperature is 70 degC acpibtn0 at acpi0: PWRB cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2400, 1600 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 intel_overlay_map_regs partial stub inteldrm0: 1920x1080 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82Q965 Video" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 4 int 21 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi azalia0: codecs: Realtek ALC260 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi, address 00:03:1d:05:c6:be ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi pci3 at ppb2 bus 3 em1 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi, address 00:03:1d:05:c6:bf uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 4 int 23 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 4 int 19 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci4 at ppb3 bus 4 pcib0 at pci4 dev 6 function 0 vendor "Winbond", unknown product 0x0628 rev 0x00 ohci0 at pci4 dev 13 function 0 "NEC USB" rev 0x43: apic 4 int 19, version 1.0, legacy support ohci1 at pci4 dev 13 function 1 "NEC USB" rev 0x43: apic 4 int 16, version 1.0, legacy support ehci2 at pci4 dev 13 function 2 "NEC USB" rev 0x04: apic 4 int 17 usb2 at ehci2: USB revision 2.0 uhub2 at usb2 "NEC EHCI root hub" rev 2.00/1.00 addr 1 re0 at pci4 dev 14 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), apic 4 int 18, address c8:3a:35:d8:ec:0b rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x4e/2: W83627DHG rev 0x25 lm1 at wbsio0 port 0x290/8: W83627DHG usb3 at ohci0: USB revision 1.0 uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci1: USB revision 1.0 uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1 pcib1 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: msi, AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 1 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI3 0/direct fixed naa.50014ee1009b166c sd0: 305245MB, 512 bytes/sector, 625142448 sectors ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 4 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 usb5 at uhci0: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci1: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci2: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb8 at uhci3: USB revision 1.0 uhub8 at usb8 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb9 at uhci4: USB revision 1.0 uhub9 at usb9 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa at pcib1 not configured mtrr: Pentium Pro MTRR support run0 at uhub1 port 4 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2 run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address 00:1c:f0:99:3f:a3 uhidev0 at uhub8 port 1 configuration 1 interface 0 "Lite-On Technology Corp. HP Basic USB Keyboard" rev 1.10/1.03 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (14f181a4b15719c3.a) swap on sd0b dump on sd0b Code:
OpenBSD 5.3-current (GENERIC.MP) #2: Tue Apr 23 19:12:57 EEST 2013 root@tfort.local.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8530690048 (8135MB) avail mem = 8295895040 (7911MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfc890 (29 entries) bios0: vendor American Megatrends Inc. version "1.25.2415" date 06/25/2010 bios0: FUJITSU ESPRIMO P1510 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET SSDT acpi0: wakeup devices P0P4(S4) P0P5(S4) P0P6(S4) BR1E(S4) PS2K(S4) PS2M(S4) EUSB(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) GBE_(S4) BR20(S4) BR21(S4) BR22(S4) BR23(S4) BR24(S4) BR25(S4) BR26(S4) BR27(S4) P0P1(S4) P0P3(S4) USBE(S4) SLPB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.42 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 132MHz cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu4 at mainbus0: apid 1 (application processor) cpu4: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu4: 256KB 64b/line 8-way L2 cache cpu5 at mainbus0: apid 3 (application processor) cpu5: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu5: 256KB 64b/line 8-way L2 cache cpu6 at mainbus0: apid 5 (application processor) cpu6: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu6: 256KB 64b/line 8-way L2 cache cpu7 at mainbus0: apid 7 (application processor) cpu7: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, 2926.00 MHz cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC cpu7: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 1, remapped to apid 8 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (BR1E) acpiprt2 at acpi0: bus 2 (BR20) acpiprt3 at acpi0: bus -1 (BR21) acpiprt4 at acpi0: bus -1 (BR22) acpiprt5 at acpi0: bus -1 (BR23) acpiprt6 at acpi0: bus 3 (BR24) acpiprt7 at acpi0: bus 4 (BR25) acpiprt8 at acpi0: bus -1 (BR26) acpiprt9 at acpi0: bus -1 (BR27) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpicpu2 at acpi0: C3, C2, C1, PSS acpicpu3 at acpi0: C3, C2, C1, PSS acpicpu4 at acpi0: C3, C2, C1, PSS acpicpu5 at acpi0: C3, C2, C1, PSS acpicpu6 at acpi0: C3, C2, C1, PSS acpicpu7 at acpi0: C3, C2, C1, PSS acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2934, 2933, 2800, 2667, 2533, 2400, 2267, 2133, 2000, 1867, 1733, 1600, 1467, 1333, 1200 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11 ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon HD 5670" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5600 Audio" rev 0x00: msi azalia0: no supported codecs "Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured "Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured "Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured "Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured "Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured "Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 8 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia1 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi azalia1: codecs: Realtek ALC888, Intel/0x2804, using Realtek ALC888 audio0 at azalia1 ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: msi pci4 at ppb3 bus 4 ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 8 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6 pci5 at ppb4 bus 5 re0 at pci5 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), apic 8 int 16, address c8:3a:35:da:0b:89 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 re1 at pci5 dev 1 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd (0x1800), apic 8 int 17, address 6c:62:6d:8d:c0:13 rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2 pcib0 at pci0 dev 31 function 0 "Intel H55 LPC" rev 0x06 ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, BD-RE BH30N, 1.02> ATAPI 5/cdrom removable sd0 at scsibus0 targ 2 lun 0: <ATA, ST31500541AS, CC35> SCSI3 0/direct fixed naa.5000c5002ad1e776 sd0: 1430799MB, 512 bytes/sector, 2930277168 sectors cd1 at scsibus0 targ 3 lun 0: <Optiarc, DVD RW AD-7250H, 1.81> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 8 int 18 iic0 at ichiic0 iic0: addr 0x28 01=00 02=00 03=00 04=01 05=80 06=00 07=03 41=00 42=00 43=00 44=01 45=80 46=00 47=03 81=00 82=00 83=00 84=01 85=80 86=00 87=03 c1=00 c2=00 c3=00 c4=01 c5=80 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=01ff 05=80ff 06=00ff 07=ffff spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 umass0 at uhub2 port 4 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/51.95 addr 3 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 0/direct removable sd2 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 0/direct removable sd3 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable sd4 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct removable uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (4ae412dcefa0a69d.a) swap on sd0b dump on sd0b Also identical in between each other for running ooold current Code:
OpenBSD 5.3 (GENERIC.MP) #49: Tue Feb 26 09:07:33 MST 2013 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF real mem = 1064693760 (1015MB) avail mem = 1036288000 (988MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/22/07, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.4 @ 0xf4724 (21 entries) bios0: vendor Hewlett-Packard version "68YOP Ver. F.0A" date 01/22/2007 bios0: Hewlett-Packard HP Compaq nc2400(#ABU) acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C094(S5) C1DE(S5) C0EF(S3) C0F6(S3) C0F7(S3) C0F8(S3) C0F9(S3) C100(S5) C1EA(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 2 (C094) acpiprt1 at acpi0: bus 8 (C100) acpiprt2 at acpi0: bus 0 (C002) acpiec0 at acpi0 acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpipwrres0 at acpi0: C1D6 acpipwrres1 at acpi0: C2C9 acpipwrres2 at acpi0: C2CA acpipwrres3 at acpi0: C2CB acpipwrres4 at acpi0: C2CC acpitz0 at acpi0: critical temperature is 105 degC acpitz1 at acpi0: critical temperature is 105 degC acpitz2 at acpi0: critical temperature is 105 degC acpitz3 at acpi0: critical temperature is 105 degC acpitz4 at acpi0: critical temperature is 110 degC acpibat0 at acpi0: C1B6 model "Primary" serial 32984 2008/03/07 type LIon oem "Hewlett-Packard" acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C1F1 acpibtn1 at acpi0: C1EE acpivideo0 at acpi0: C081 bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1800 cpu0: Enhanced SpeedStep 1198 MHz: speeds: 1200, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1: apic 1 int 16 drm0 at inteldrm0 "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices AD1981HD audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 22 pci1 at ppb0 bus 8 8:0:0: mem address conflict 0xf0000000/0x1000 wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:6f:2a:fd uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 21 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 22 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 22 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): apic 1 int 17, address 00:1b:24:02:4d:5a brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 cbb0 at pci2 dev 9 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18 "TI PCIXX12 FireWire" rev 0x00 at pci2 dev 9 function 1 not configured "TI PCIXX12 Smart Card" rev 0x00 at pci2 dev 9 function 4 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4008GAH> wd0: 16-sector PIO, LBA48, 38147MB, 78126048 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-842S, 1.10> ATAPI 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (ac03c805b70d295d.a) swap on wd0b dump on wd0b |
|
|||
Sun Blade 100 @ 500 mhz
OpenBSD 5.3 2 GB of Ram (2) 15 GB disks I originally used Solaris 9 on this machine back in 2003. |
|
||||
I moved my home, recently, and took the opportunity to install a new pair of low power, solid-state OpenBSD firewalls when I made the transition. The outer LAN's availability is managed by ifstated(8), the inner LAN uses carp(4). The firewalls keep pf(4) and dhcpd(8) in sync via Ethernet crossover.
Left to right on the shelf: a switch for the outer LAN, a cable modem, a pair of PC Engines Alix2d13 systems running OpenBSD, a switch for the inner LAN, and a wireless AP. This photo is being served to you from one of the Alix machines.. Last edited by jggimi; 6th October 2013 at 10:36 PM. |
|
||||
Proliant ML370 G4
I recently acquired an HP-Proliant ML370-G4 with a PCI-X Smart Array 6404 SCSI U320 controller card that has a 192MB cache. It currently has two 146GB U320 10kRPM drives configured as a RAID0 array. I plan to add four more 146GB drives configured as a RAID5 array (it has a six disk drive cage).
http://pastebin.com/BTV4atTD The machine is built like a tank - redundant power supplies, ECC RAM throughout, hot-swap drives, six hot-swap fans, SDLT320 tape drive, etc. The quality of the hardware and thoughtfulness of the design are very impressive, especially considering that I snagged this sweet box for $200. OpenBSD is a perfect fit. Last edited by ocicat; 13th December 2013 at 01:50 AM. Reason: Your account has been enabled to post URL's. |
|
|||
I just recieved my new (to me) machine. A nice Dell 1U labeled as PowerEdge C1100.
Code:
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014 deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP real mem = 25743458304 (24550MB) avail mem = 25049563136 (23889MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9e000 (81 entries) bios0: vendor Dell Computer Corporation version "DS993B22" date 06/21/2012 bios0: Dell CS24-TY acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP APIC SPCR MCFG SSDT OEMB HPET SSDT EINJ BERT ERST HEST acpi0: wakeup devices P0P1(S4) UAR1(S4) UAR2(S4) USB0(S4) EUSB(S4) GBE_(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) GBE3(S5) P0P9(S4) GBE4(S5) NPE1(S5) NPE2(S5) NPE3(S5) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.69 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 18 (application processor) cpu2: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 9, package 0 cpu3 at mainbus0: apid 20 (application processor) cpu3: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.42 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 0, core 10, package 0 cpu4 at mainbus0: apid 32 (application processor) cpu4: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu4: 256KB 64b/line 8-way L2 cache cpu4: smt 0, core 0, package 1 cpu5 at mainbus0: apid 34 (application processor) cpu5: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.42 MHz cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu5: 256KB 64b/line 8-way L2 cache cpu5: smt 0, core 1, package 1 cpu6 at mainbus0: apid 50 (application processor) cpu6: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.42 MHz cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu6: 256KB 64b/line 8-way L2 cache cpu6: smt 0, core 9, package 1 cpu7 at mainbus0: apid 52 (application processor) cpu7: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu7: 256KB 64b/line 8-way L2 cache cpu7: smt 0, core 10, package 1 cpu8 at mainbus0: apid 1 (application processor) cpu8: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu8: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu8: 256KB 64b/line 8-way L2 cache cpu8: smt 1, core 0, package 0 cpu9 at mainbus0: apid 3 (application processor) cpu9: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu9: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu9: 256KB 64b/line 8-way L2 cache cpu9: smt 1, core 1, package 0 cpu10 at mainbus0: apid 19 (application processor) cpu10: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu10: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu10: 256KB 64b/line 8-way L2 cache cpu10: smt 1, core 9, package 0 cpu11 at mainbus0: apid 21 (application processor) cpu11: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu11: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu11: 256KB 64b/line 8-way L2 cache cpu11: smt 1, core 10, package 0 cpu12 at mainbus0: apid 33 (application processor) cpu12: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu12: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu12: 256KB 64b/line 8-way L2 cache cpu12: smt 1, core 0, package 1 cpu13 at mainbus0: apid 35 (application processor) cpu13: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu13: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu13: 256KB 64b/line 8-way L2 cache cpu13: smt 1, core 1, package 1 cpu14 at mainbus0: apid 51 (application processor) cpu14: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu14: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu14: 256KB 64b/line 8-way L2 cache cpu14: smt 1, core 9, package 1 cpu15 at mainbus0: apid 53 (application processor) cpu15: Intel(R) Xeon(R) CPU L5630 @ 2.13GHz, 2133.41 MHz cpu15: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu15: 256KB 64b/line 8-way L2 cache cpu15: smt 1, core 10, package 1 ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 4, remapped to apid 6 ioapic1 at mainbus0: apid 7 pa 0xfec8a000, version 20, 24 pins ioapic1: misconfigured as apic 6, remapped to apid 7 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 7 (P0P1) acpiprt2 at acpi0: bus -1 (P0P8) acpiprt3 at acpi0: bus -1 (P0P9) acpiprt4 at acpi0: bus 1 (NPE1) acpiprt5 at acpi0: bus 2 (NPE2) acpiprt6 at acpi0: bus 3 (NPE3) acpiprt7 at acpi0: bus -1 (NPE4) acpiprt8 at acpi0: bus -1 (NPE5) acpiprt9 at acpi0: bus -1 (NPE6) acpiprt10 at acpi0: bus 4 (NPE7) acpiprt11 at acpi0: bus -1 (NPE8) acpiprt12 at acpi0: bus 5 (NPE9) acpiprt13 at acpi0: bus -1 (NPEA) acpiprt14 at acpi0: bus 6 (P0P4) acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpicpu4 at acpi0: C3, C1, PSS acpicpu5 at acpi0: C3, C1, PSS acpicpu6 at acpi0: C3, C1, PSS acpicpu7 at acpi0: C3, C1, PSS acpicpu8 at acpi0: C3, C1, PSS acpicpu9 at acpi0: C3, C1, PSS acpicpu10 at acpi0: C3, C1, PSS acpicpu11 at acpi0: C3, C1, PSS acpicpu12 at acpi0: C3, C1, PSS acpicpu13 at acpi0: C3, C1, PSS acpicpu14 at acpi0: C3, C1, PSS acpicpu15 at acpi0: C3, C1, PSS acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2134, 2133, 2000, 1867, 1733, 1600 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x22 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" rev 0x22: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x22: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x22: msi pci5 at ppb4 bus 5 "Intel X58 IOxAPIC" rev 0x22 at pci0 dev 19 function 0 not configured "Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured "Intel X58 Throttle" rev 0x22 at pci0 dev 20 function 3 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 23 uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 22 uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 21 ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi pci6 at ppb5 bus 6 em0 at pci6 dev 0 function 0 "Intel 82576" rev 0x01: msi, address em1 at pci6 dev 0 function 1 "Intel 82576" rev 0x01: msi, address uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 6 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 6 int 22 uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 6 int 21 ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 6 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci7 at ppb6 bus 7 vga1 at pci7 dev 11 function 0 "ASPEED Technology AST2000" rev 0x10 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 6 int 18 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD2502ABYS-18B7A0> wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 6 int 18 iic0 at ichiic0 iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000 pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 6 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25 wbsio0 port 0xa10/2 not configured uhidev0 at uhub0 port 4 configuration 1 interface 0 "Avocent USB Composite Device-0" rev 2.00/0.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 4 configuration 1 interface 1 "Avocent USB Composite Device-0" rev 2.00/0.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse1 at ums0 mux 0 uhidev2 at uhub0 port 4 configuration 1 interface 2 "Avocent USB Composite Device-0" rev 2.00/0.00 addr 2 uhidev2: iclass 3/1 ums1 at uhidev2: 3 buttons, Z dir wsmouse2 at ums1 mux 0 uhub8 at uhub1 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2 uhub9 at uhub8 port 4 "Logitech Logitech G15 Keyboard" rev 1.10/1.03 addr 3 uhidev3 at uhub9 port 1 configuration 1 interface 0 "Logitech Logitech Gaming Keyboard" rev 2.00/1.70 addr 4 uhidev3: iclass 3/1 ukbd1 at uhidev3: 8 variable keys, 6 key codes wskbd2 at ukbd1 mux 1 wskbd2: connecting to wsdisplay0 uhidev4 at uhub9 port 1 configuration 1 interface 1 "Logitech Logitech Gaming Keyboard" rev 2.00/1.70 addr 4 uhidev4: iclass 3/0, 3 report ids uhid0 at uhidev4 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev4 reportid 2: input=7, output=0, feature=0 uhid2 at uhidev4 reportid 3: input=1, output=20, feature=1 uhidev5 at uhub9 port 3 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 5 uhidev5: iclass 3/1 ums2 at uhidev5: 3 buttons, Z dir wsmouse3 at ums2 mux 0 uhidev6 at uhub9 port 4 configuration 1 interface 0 "G15 Keyboard G15 Keyboard" rev 2.00/1.03 addr 6 uhidev6: iclass 3/0, 3 report ids uhid3 at uhidev6 reportid 1: input=8, output=0, feature=0 uhid4 at uhidev6 reportid 2: input=8, output=18, feature=3 uhid5 at uhidev6 reportid 3: input=0, output=991, feature=0 vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (00182b74aa50c72c.a) swap on wd0b dump on wd0b arp info overwritten for 192.168.0.26 by 80:1f:02:cc:67:9f on em0 |
|
|||
I know there is a PCIe-2.0 x16 on it... but is there enough room to fit a video card?
Anyhow, make sure to get a Radeon. |
|
|||
Seems to be enough for at least a "sane" card. Been a long time since I've looked into video cards for PCs at all, let alone tracking down *nix supported cards. Time to hit the forums
|
|
|||
OpenBSD current
OpenBSD 5.6-current on my HP 625 :
dmesg : Quote:
|
|
||||
I have a few new additions (BeagleBone Black, new Dell laptop, etc...), but the Ultra5 and gang are all still chugging along like they always have. If I'm not mistaken, I've run the same firewall hardware since 2008, which has survived hard drive failures, fan failures, two moves (one cross country), and the like.
The only real change (aside from adding a few OpenBSD machines) is that I have more machines running STABLE than CURRENT now. Go figure.
__________________
Linux/Network-Security Engineer by Profession. OpenBSD user by choice. |
|
|||
My router is now a Dell Optiplex 760, 4Gb ram, 160Gb SATA HDD, Broadcom 1Gbps PCIe NIC (for Lan) salvaged from our "to be disposed of from customer junk pile" running OpenBSD 5.7, it replaced my BT Homehub 5 which is now acting as a Wireless Access point.
|
|
|||
An older Compaq Presario from early 2006 with an AMD Processor, 64bit with 3GB of memory and a 100GB HD.
Code:
OpenBSD 5.7 (RAMDISK_CD) #806: Sun Mar 8 11:08:49 MDT 2015 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 3404660736 (3246MB) avail mem = 3312402432 (3158MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (53 entries) bios0: vendor Phoenix Technologies, LTD version "3.13" date 11/15/2005 bios0: Compaq Presario 061 EL426AA-ABA SR1710NX NA611 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT SRAT MCFG APIC acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Sempron(tm) Processor 3400+, 1990.14 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 128KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: AMD erratum 89 present, BIOS upgrade may be required cpu0: apic clock running at 198MHz Last edited by ocicat; 13th August 2015 at 09:26 PM. Reason: Please use [code] & [/code] tags when posting console output. |
|
|||
(Helpful reminder for everyone to also posts their dmesgs to http://dmesgd.nycbug.org -- every dmesg counts! And not just for OpenBSD, but all of them.)
|
|
|||
Broadwell Intel NUC. Home workstation. So tiny sitting next to my Mini-ITX FreeNAS server.
Running -current; UEFI disabled, Legacy Boot enabled. The wifi works, but I'm physically plugged into a gigabit switch. Code:
OpenBSD 5.8-current (GENERIC.MP) #1537: Tue Oct 20 09:44:09 MDT 2015 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16027291648 (15284MB) avail mem = 15537426432 (14817MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec7b0 (86 entries) bios0: vendor Intel Corporation version "RYBDWi35.86A.0130.2014.1203.1639" date 12/03/2014 bios0: \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI SSDT ASF! SSDT SSDT SSDT DMAR acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PS2K(S3) PS2M(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.49 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.16 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.16 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 2095.16 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpimadt0: bogus nmi for apid 0 acpimadt0: bogus nmi for apid 2 acpimadt0: bogus nmi for apid 3 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus 1 (RP01) acpiprt5 at acpi0: bus -1 (RP02) acpiprt6 at acpi0: bus -1 (RP03) acpiprt7 at acpi0: bus 2 (RP04) acpiprt8 at acpi0: bus -1 (RP05) acpiprt9 at acpi0: bus -1 (RP06) acpiprt10 at acpi0: bus -1 (RP07) acpiprt11 at acpi0: bus -1 (RP08) acpiec0 at acpi0: not present acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x31), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PG00, resource for PEG0 acpipwrres1 at acpi0: PG01, resource for PEG1 acpipwrres2 at acpi0: PG02, resource for PEG2 acpipwrres3 at acpi0: FN00, resource for FAN0 acpipwrres4 at acpi0: FN01, resource for FAN1 acpipwrres5 at acpi0: FN02, resource for FAN2 acpipwrres6 at acpi0: FN03, resource for FAN3 acpipwrres7 at acpi0: FN04, resource for FAN4 acpitz0 at acpi0: critical temperature is 110 degC acpitz1 at acpi0: critical temperature is 110 degC acpibat0 at acpi0: BAT0 not present acpibat1 at acpi0: BAT1 not present acpibat2 at acpi0: BAT2 not present acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: SLPB acpibtn2 at acpi0: PWRB acpivideo0 at acpi0: GFX0 cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1200, 1100, 1000, 900, 800, 700, 600, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 intagp at vga1 not configured inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1920x1200 error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel I218-V" rev 0x03: msi, address b8:ae:ed:71:9d:00 azalia0 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia0: codecs: Realtek/0x0283 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 2 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3 ahci0: port 3: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 3 lun 0: <ATA, Crucial_CT500MX2, MU01> SCSI3 0/direct fixed naa.500a07510e6f4572 sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x4e/2: NCT6776F rev 0x33 lm1 at wbsio0 port 0xa00/8: NCT6776F uhidev0 at uhub0 port 3 configuration 1 interface 0 "Logitech USB Trackball" rev 1.10/14.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 5 buttons wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/2.09 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev2 at uhub0 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/2.09 addr 3 uhidev2: iclass 3/1, 2 report ids uhid0 at uhidev2 reportid 1: input=6, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0 ugen0 at uhub0 port 7 "Intel product 0x0a2a" rev 2.01/0.01 addr 4 uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd1: 468740MB, 512 bytes/sector, 959979612 sectors softraid0: volume sd1 is roaming, it used to be sd2, updating metadata root on sd1a (b7304074f7f66bad.a) swap on sd1b dump on sd1b iwm0: could not read firmware iwm-7265-9 (error 2) error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid11661:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP idle patterns |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Your NetBSD hardware | PhotoJim | NetBSD General | 22 | 4th October 2023 01:55 PM |
Your FreeBSD Hardware | FloridaBSD | FreeBSD General | 77 | 18th February 2019 03:33 AM |
Hardware recommendation: what hardware to buy for my new FreeBSD desktop? | Broodjegehaktmetmayo | General Hardware | 92 | 11th February 2009 10:43 PM |
upgrading/new hardware from 4.0 | knasbas | OpenBSD Installation and Upgrading | 1 | 7th January 2009 02:55 AM |
What Sun hardware do you have | revzalot | General Hardware | 7 | 22nd August 2008 01:44 PM |