DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 11th October 2019
xchris's Avatar
xchris xchris is offline
Port Guard
 
Join Date: Mar 2011
Posts: 11
Default brightness stuck on high..

Hi,

I am trying the OpenBSD with a Thinkpad yoga 11e.
most of the things are working, with the exception of the brightness (stays
on the highest)
utils like xbacklght or wsconsctl display.brightness are not working.
- note that I did the "fw_update" too..

if any ideas pls let me know, like if I need any special config for the xorg...

thanks in advance!


dmesg :

Code:
OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4008706048 (3823MB)
avail mem = 3877572608 (3697MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0840 (39 entries)
bios0: vendor LENOVO version "N15ET77W (1.37)" date 05/23/2019
bios0: LENOVO 20D9000QUK
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT UEFI MSDM BATB FPDT UEFI
acpi0: wakeup devices XHC1(S3) RP01(S4) RP03(S4) RP04(S4) LID_(S4) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz, 1833.68 MHz, 06-37-08
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz, 1833.34 MHz, 06-37-08
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz, 1833.34 MHz, 06-37-08
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz, 1833.34 MHz, 06-37-08
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 87 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 4 (RP03)
acpiprt3 at acpi0: bus 5 (RP04)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: USBC, resource for OTG1, EHC1
acpitz0 at acpi0: critical temperature is 100 degC
"INT3396" at acpi0 not configured
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
acpithinkpad0 at acpi0
"LEN0049" at acpi0 not configured
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT1 model "45N1749" serial  4186 type LiP oem "LGC"
acpibtn0 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
"MSFT9000" at acpi0 not configured
"MSFT9001" at acpi0 not configured
bytgpio0 at acpi0: GPO2 uid 3 addr 0xfed0e000/0x1000 irq 50, 44 pins
"INTL9C60" at acpi0 not configured
"BCM2E1A" at acpi0 not configured
"BCM4752" at acpi0 not configured
dwiic0 at acpi0 I2C1 addr 0x90909000/0x1000 irq 32
iic0 at dwiic0
ihidev0 at iic0 addr 0x50 gpio 1, vendor 0x48d product 0x8380, ITE8386
ihidev0: 90 report ids
hid at ihidev0 reportid 1 not configured
hid at ihidev0 reportid 2 not configured
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 5 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 90 not configured
dwiic1 at acpi0 I2C2 addr 0x9090f000/0x1000 irq 33
iic1 at dwiic1
ihidev1 at iic1 addr 0x4a gpio 4, vendor 0x3eb product 0x8c1f, ATML1000
ihidev1: 6 report ids
ims0 at ihidev1 reportid 1: 1 button, tip
wsmouse0 at ims0 mux 0
hid at ihidev1 reportid 2 not configured
hid at ihidev1 reportid 5 not configured
hid at ihidev1 reportid 6 not configured
"INT33BD" at acpi0 not configured
"INT3401" at acpi0 not configured
"INT3400" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 1833 MHz: speeds: 1827, 1826, 1660, 1494, 1328, 1162, 996, 830, 664, 498 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SATA SSD, SAFM> SCSI3 0/direct fixed t10.ATA_SATA_SSD_2FA607650E0804473535
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0e: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e: msi
azalia0: codecs: Realtek/0x0283, Intel/0x2882, using Realtek/0x0283
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x0e: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x83, msi
ppb2 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 5
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 2c:60:0c:67:f0:9d
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 2 int 18
iic2 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x840300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhidev0 at uhub0 port 1 configuration 1 interface 0 "IBM Wheel" rev 2.00/1.60 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse2 at ums0 mux 0
umass0 at uhub0 port 2 configuration 1 interface 0 "Western Digital External HDD" rev 2.00/2.40 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <WDC WD80, 0UE-22HCT0, 0000> SCSI0 0/direct fixed serial.10580701DEF10AB9D6C8
sd1: 76319MB, 512 bytes/sector, 156301488 sectors
uhub1 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 4
ugen0 at uhub1 port 1 "Intel product 0x07dc" rev 2.00/0.01 addr 5
uvideo0 at uhub1 port 2 configuration 1 interface 0 "SunplusIT Inc Integrated Camera" rev 2.00/37.05 addr 6
video0 at uvideo0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (7232b1d10d2d4ca1.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
iwm0: hw rev 0x140, fw ver 16.242414.0, address 5c:c5:d4:c9:b2:97
Reply With Quote
  #2   (View Single Post)  
Old 12th October 2019
Head_on_a_Stick's Avatar
Head_on_a_Stick Head_on_a_Stick is offline
Real Name: Matthew
Bitchy Nerd Elitist
 
Join Date: Dec 2015
Location: London
Posts: 461
Default

Have you tried -current? Perhaps the support for that card has improved.
__________________
Are you infected with Wetiko?
Reply With Quote
  #3   (View Single Post)  
Old 12th October 2019
xchris's Avatar
xchris xchris is offline
Port Guard
 
Join Date: Mar 2011
Posts: 11
Default

thanks, just tried and the same results, I will better stay with ClearLinux with that laptop -designed for windoze anyway...
Reply With Quote
Reply

Tags
brightness, openbsd, yoga 11e

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stuck on CD installation DuneyWall OpenBSD Installation and Upgrading 19 4th August 2019 08:48 PM
Thinkpad auto brightness on boot Funkygoby OpenBSD General 4 27th March 2019 06:42 PM
I would like to understand how brightness works attilio OpenBSD General 4 1st January 2018 12:38 PM
Latop adjust brightness psypro OpenBSD General 3 31st March 2017 09:06 PM
openBSD on toshiba sat c75d-b brightness sidney256 OpenBSD General 10 7th November 2015 04:48 PM


All times are GMT. The time now is 11:59 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick