|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
openBSD 6.2 Problem kelnerage fault trap Code=0
first trouble during installation.Have any knowledge what would be my installation problem.After installation I got some noticed after start openBSD 6.2 .First time I have this issue 6.1 worked fine.I got iso from website and install Opebsd by internet.
I can't do nothing because after system start then stop and stop wait .When I reboot the situation is the same.This is a New installation 6.2 Code:
Problem kelnerage fault trap Code=0 Stopped at uvm_pmr_get1 page+0x380:movl%ecx,0(%edi,%eax,1ddb{0}> Last edited by ocicat; 13th October 2017 at 05:49 PM. Reason: Please use [code] & [/code] tags when posting screen output. |
|
|||
Hi I can't install my stick usb .When i tried use command .
mkdir /mnt/pen mount /dev/sd0i /mnt/pen and copy by cp dmesg /mnt.pen after it I didn't see this file on my stick .I probably should use monunt msdos -t but shell see problem. ####################################### I write what i saw during start openbsd 6.2 I have Nividia card and my Intel i7 has also one card on processor .But I have never had a this issue happened. Vga1 at pci1 dev 0 function 0 Vendor NVIDIA unknow produt 0x1402 rev 0xa1 azalia 0 :no supported codecs inteldrom 0 at pci0 dev 2 function 0 intel HD Graphics 3000 rev 0x89 and system stop and wait . What is """azalia 0'''' this is NSA product maybe .??? My graphic card work fine .And what I can do without Ubuntu stick . |
|
|||
I install again my old openbsd 5.9 and works .Then I upgrade for 6.2 and situation is the same.
Conclusion. I suppose Openbsd 6.2 has some problem https://ftp.openbsd.org/pub/OpenBSD/.../install62.iso or Openbsd 6.2 doesn't support my graphic card or something else . |
|
||||
|
|
||||
I have time to answer your last question:
Quote:
http://man.openbsd.org/OpenBSD-6.1/azalia |
|
|||
Now from Windows .I will be try again install openbsd 6.2 and put this outcome on my stick and update on this forum.For my is surprise why this mistake isn't on Old version 5.9
all what i copy us my keyboard I see when OpenBSD 6.2 start and stop(blue color).This second information was before previous. |
|
|||
Code:
# mount /dev/sd0i /mnt # dmesg > /mnt/my.dmesg # umount /mnt How to send it from shell console maybe it is possible . This file is not at my stick. Last edited by ocicat; 13th October 2017 at 05:50 PM. Reason: Please use [code] & [/code] tags when posting commands. |
|
|||
When openbsd 6.2 start before start I write how you said me
boot bsd.rd and next start Shell all command mount and copy .I see this file dmesg at /mnt But USB stick don't have this .When I use my Ubuntu to see this stick.USB pen is empty. |
|
|||
Now I see this information
Warming R/W mount of /mnt denied filesystem is not clean run fsck mount ffs /sev/sd0i on /mnt mount read-only WHo said OpenBSD is very easy system to use .I can't start ######################## GENERIC in standalone mode? RAMDISK in shell? ########### I use boot bsd.rd boot -s standing and stop during system run .The same situation. only bsd.rd |
|
||||
I'm sorry we continue to have problems communicating. At least I have now learned you are using the RAMDISK kernel. But that is almost all I have learned.
My best guess, from the information you have been able to provide: your mount command is not successful. If my guess is correct:
Here is a test you can make yourself, to confirm if my guess is correct: After booting bsd.rd and selecting the shell, insert your USB device. If the device is recognized, you will see kernel messages when the device is inserted. Look for a umass(4) driver message and the assignment of an sd(4) device number for the inserted drive. It might be sd0, but it may also be sd1, or sd2, or sd3 ... If it is a device number OTHER than sd0, that will explain why your mount fails.You will next want to learn if there is a FAT filesystem at virtual disklabel partition "i" on that assigned device number. If the device is sd4, you would do this with # disklabel sd4 - and then look to see if there is an MS_DOS filesystem at partition "i". If not, the USB device does not have an MBR or GPT partition table with a FAT partition defined.--- I have a second guess, but that involves having a different sd0 drive with a mountable "i" partition. If that is the situation, then you have been ignoring the device number messages the kernel provides to you when you insert the USB device. And you have not issued ls(1) commands to confirm the correct filesystem is mounted. Unfortunately, I have no idea which of my two guesses is correct. They might both be wrong, but I can only work with the limited information you have provided. --- I have asked several questions that you have been unable to answer. I will ask them again.
Last edited by jggimi; 12th October 2017 at 07:56 PM. Reason: typos, clarity |
|
|||
Answered you for last issue .Openbsd 6.2 was by me correct installed.After reboot system start but not finish and stop during chck hardware (blue color we cans see)..in my case BSD after check hardware stop in the half check after few second .And not finish his check .
Now I still fight with Stick/USB//PEN I see unmass sd1 I made sh mkedev sd 1 I made dislabel sd 1 I see 2 particion I and c msdos Now this issue mount_ffs /dev/rsd1c /mnt Block device required |
|
||||
I see three commands with three errors.
1. The MAKEDEV program is called in upper case: MAKEDEV, not makedev. 2. There should be no whitespace between sd and 1: sd1. 3. You selected the wrong partition. "c" is the physical disk drive, "i" is the filesystem. These first two commands must have generated errors. But you have not reported any. Try these three commands. Pay attention to the commands you enter, and actually note any errors. Code:
# cd /dev # sh MAKEDEV sd1 # mount /dev/sd1i /mnt If you get no error message, try # ls /mnt If you see files and directories you recognize from your USB device, you will now have finally successfully mounted the device. Now, you can reissue your dmesg(8) command, and route the output to a file on the device. Then, you can unmount it, and share the dmesg buffer with the world. |
|
||||
Quote:
After you noted error message, please report it. And if you note it manually, be careful to the exact syntax. Or take a picture with a camera (i.e. smartphone), it'll be possible to share it. You could also take a picture of your problem, when OpenBSD hangs while booting... ------------------------------------------------------------------------------------ Can I make some guess too ? Looks like your video card is a GTX 950, right ? Quote:
My guess : you have hybrid video. Could you please tell exactly what is your computer ? the brand, the model... And if I'm right about hybrid video, remember your first thread... back in 2015... Obviously not the same computer and not the same problem, but shep's advice is still relevant... http://daemonforums.org/showthread.php?t=9100#post54694
__________________
ThinkPad W500 P8700 6GB HD3650 - faultry ThinkStation P700 2x2620v3 32GB 1050ti 3xSSD 1xHDD Last edited by LeFrettchen; 12th October 2017 at 11:23 PM. Reason: Clarity |
|
|||
Hello this is my second day fight .OpenBSD isn't for everyone.
jggimi this works !!!!!!!!!!!!!!!!!!!!!!!!!! Code:
# cd /dev # sh MAKEDEV sd1 # mount /dev/sd1i /mnt ################# Now this my.dmesg Code:
OpenBSD 6.2 (RAMDISK_CD) #165: Tue Oct 3 20:05:31 MDT 2017 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz ("GenuineIntel" 686-class) 3.51 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,AES,XSAVE,AVX,LAHF,PERF,ITSC,SENSOR,ARAT real mem = 3375058944 (3218MB) avail mem = 3301220352 (3148MB) mainbus0 at root bios0 at mainbus0: date 05/03/12, SMBIOS rev. 2.7 @ 0xee7f0 (26 entries) bios0: vendor American Megatrends Inc. version "P2.90M" date 06/09/2015 bios0: ASRock Z77 Extreme4 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC FPDT MCFG SSDT AAFT HPET SSDT SSDT SSDT BGRT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 100MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus -1 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus 3 (RP04) acpiprt6 at acpi0: bus 4 (RP05) acpiprt7 at acpi0: bus 5 (RP06) acpiprt8 at acpi0: bus 6 (BR40) acpiprt9 at acpi0: bus -1 (RP07) acpiprt10 at acpi0: bus 7 (RP08) acpiprt11 at acpi0: bus 1 (PEG0) acpiprt12 at acpi0: bus -1 (PEG1) acpiprt13 at acpi0: bus -1 (PEG2) acpiprt14 at acpi0: bus -1 (PEG3) acpiec0 at acpi0: not present acpicpu at acpi0 not configured "INT3F0D" at acpi0 not configured "pnp0c14" at acpi0 not configured "PNP0C0C" at acpi0 not configured "INT33A0" at acpi0 not configured bios0: ROM list: 0xc0000/0xe600 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: apic 2 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x1402 rev 0xa1 vga1: aperture needed wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) vendor "NVIDIA", unknown product 0x0fba (class multimedia subclass hdaudio, rev 0xa1) at pci1 dev 0 function 1 not configured "Intel HD Graphics 3000" rev 0x09 at pci0 dev 2 function 0 not configured xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured ppb1 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 19 pci3 at ppb2 bus 3 ahci0 at pci3 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI 1.2 ahci0: port 1: 6.0Gb/s scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 1 lun 0: <ATA, ADATA SP900, C3G> SCSI3 0/direct fixed naa.0000000000000000 sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin ppb3 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16 pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM57781" rev 0x10, BCM57765 B0 (0x57785100): msi, address bc:5f:f4:4b:63:3e brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 4 ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 17 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x03 pci6 at ppb5 bus 6 ppb6 at pci0 dev 28 function 7 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 19 pci7 at ppb6 bus 7 xhci1 at pci7 dev 0 function 0 "ASMedia ASM1042 xHCI" rev 0x00: msi usb2 at xhci1: USB revision 3.0 uhub2 at usb2 configuration 1 interface 0 "ASMedia xHCI root hub" rev 3.00/1.00 addr 1 ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 usb3 at ehci1: USB revision 2.0 uhub3 at usb3 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel Z77 LPC" rev 0x04 ahci1 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci1: port 3: 1.5Gb/s scsibus1 at ahci1: 32 targets cd0 at scsibus1 targ 3 lun 0: <TSSTcorp, CDDVDW SH-222BB, SB00> ATAPI 5/cdrom removable "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech G100s Optical Gaming Mouse" rev 2.00/82.00 addr 2 uhidev0: iclass 3/1 uhid at uhidev0 not configured uhub4 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 uhub5 at uhub3 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 softraid0 at root scsibus2 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b umass0 at uhub4 port 3 configuration 1 interface 0 "TOSHIBA TransMemory" rev 2.10/1.10 addr 3 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd1 at scsibus3 targ 1 lun 0: <TOSHIBA, TransMemory, PMAP> SCSI4 0/direct removable serial.09306545E0C070020486 sd1: 7446MB, 512 bytes/sector, 15249408 sectors Last edited by ocicat; 13th October 2017 at 05:51 PM. Reason: Please use [code] & [/code] tags when posting command output. |
|
||||
Thank you, Pawkolor, for posting a dmesg buffer! These are of interest:
Code:
OpenBSD 6.2 (RAMDISK_CD) #165: Tue Oct 3 20:05:31 MDT 2017 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD Code:
cpu0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz ("GenuineIntel" 686-class) 3.51 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,... Code:
real mem = 3375058944 (3218MB) avail mem = 3301220352 (3148MB) Code:
vendor "NVIDIA", unknown product 0x0fba (class multimedia subclass hdaudio, rev 0xa1) at pci1 dev 0 function 1 not configured "Intel HD Graphics 3000" rev 0x09 at pci0 dev 2 function 0 not configured My recommendations:
Last edited by jggimi; 13th October 2017 at 02:11 PM. Reason: clarity |
|
|||
Ok I fully understand you .For my surprise is question why old Openbsd work on this both card but new one Openbsd 6.2 doesn't.
########### and the last question if I would like install Gnome Package .Do you know how to doing it.I install usually KDE full package from website and command start KDE .How to do it with Gnome. Thanks |
|
||||
Quote:
Quote:
Last edited by jggimi; 13th October 2017 at 02:30 PM. Reason: typos |
|
|||
I have some additional question .AMD64 works in my computer.
1.When I tried install use ftp system don't see it 2.i386 ISO file install well from internet they know link for file and conform SHA256.sig 3.AMD64 didn't connect me thru http .I gave number 7 server in Alberta but don't see. I can install from CD .CD pack file didn't conform SHA256.sig 4.Now I can't connect for packages.What way is correct in your opinion. http://ftp.OpenBSD.org/pub/OpenBSD https://ftp.openbsd.org/pub/OpenBSD/6.2/amd64/ ---shell can't do https may be this: ftp.openbsd.org/pub/OpenBSD/6.2/amd64/ https://ftp.openbsd.org/pub/OpenBSD/6.2/packages/amd64/ ftp.openbsd.org/pub/OpenBSD/6.2/packages/amd64/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
why does this simple assembly program abort trap? | billy_bazooka | Programming | 1 | 26th July 2017 04:45 AM |
PF dynamic adding of ips to table (booby trap port) | irukandji | FreeBSD Security | 8 | 5th December 2013 12:09 AM |
New Open DRM code for OpenBSD | shep | News | 0 | 22nd March 2013 02:32 AM |
opera bug in openbsd 5.1 release with Abort Trap message | daemonfowl | OpenBSD Packages and Ports | 2 | 26th May 2012 06:42 AM |
Fatal trap 12: page fault while in kernel mode | sixshot | FreeBSD General | 11 | 18th July 2008 12:53 AM |