DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 31st July 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default upgrade failure: wd0 is not a valid root disk

For the last couple of days attempts to upgrade -current have failed when trying to mount the system, with the message: wd0 is not a valid root disk.

I tried 3 different versions of bsd.rd with the same result. I can't find anything about this message with Google. The system still starts normally if I don't try an upgrade. I haven't changed anything as far as I know. Very odd.

Forgot to say, this is amd64. On a different macheine (i386) there is no problem

Last edited by acampbell; 31st July 2017 at 09:27 AM. Reason: further info
Reply With Quote
  #2   (View Single Post)  
Old 31st July 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,884
Default

Would you be so kind as to post additional information? There isn't enough information in your post to provide you with help.
  1. What is the exact wording of the message?
  2. Where in the upgrade process does it occur? (After which script prompt, specifically?)
  3. On the running, non-upgraded system, what device number is the boot drive? (wd0, wd1, sd0, sd1, sd2...)
  4. What exactly is the release/flavor of the system being upgraded? (Hint: posting a dmesg would be ideal, because it may answer many follow-on questions.)
  5. Would you please also post disklabel output for all attached drives on the running, non-upgraded system? Include the boot drive, and any other drives normally attached to the running system. (You may ignore any attached install media, if you happen to use it.)
Reply With Quote
  #3   (View Single Post)  
Old 31st July 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default

Thanks iggimi. (BTW I just tried fdisk -u but it made no difference.)

1 & 2
The boot process starts normally. I choose upgrade and my keyboard (uk). It then says:
Code:
Available disks are: wd0 (which is correct)
Pressing return or typing wd0 gives the error message: wd0 is not a valid root disk.
I then have to abort the upgrade.

3. boot is on wd0a

4. dmesg:
Code:
OpenBSD 6.1-current (RAMDISK_CD) #23: Sun Jul 30 21:21:28 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4268425216 (4070MB)
avail mem = 4135313408 (3943MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfc670 (18 entries)
bios0: vendor American Megatrends Inc. version "R01-A3" date 08/28/2007
bios0: ACER Veriton M460
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET GSCI SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2194.80 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LONG,LAHF,PERF,SENSOR
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0400" at acpi0 not configured
"PNP0F03" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x02
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), msi, address 00:19:21:4f:2e:c3
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
"Intel 82801GH LPC" rev 0x01 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD5000AAKX-08U6AA0>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD A DH16A3S, 3A12> ATAPI 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub1 port 1 configuration 1 interface 0 "BTC USB Keyboard" rev 1.10/1.80 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "BTC USB Keyboard" rev 1.10/1.80 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhidev2 at uhub4 port 1 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 2
uhidev2: iclass 3/1
uhid at uhidev2 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
OpenBSD 6.1-current (GENERIC.MP) #115: Sat Jul 22 09:58:21 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 4268425216 (4070MB)
avail mem = 4133269504 (3941MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfc670 (18 entries)
bios0: vendor American Megatrends Inc. version "R01-A3" date 08/28/2007
bios0: ACER Veriton M460
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2M(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) EUSB(S3) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2194.78 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LONG,LAHF,PERF,SENSOR
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2194.50 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LONG,LAHF,PERF,SENSOR
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 110 degC
"PNP0700" at acpi0 not configured
"PNP0400" at acpi0 not configured
"PNP0F03" at acpi0 not configured
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2194 MHz: speeds: 2200, 1600, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x1024, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), msi, address 00:19:21:4f:2e:c3
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel 82801GH LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD5000AAKX-08U6AA0>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <ATAPI, DVD A DH16A3S, 3A12> ATAPI 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0xa10
uhidev0 at uhub1 port 1 configuration 1 interface 0 "BTC USB Keyboard" rev 1.10/1.80 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "BTC USB Keyboard" rev 1.10/1.80 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub4 port 1 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev 1.10/1.10 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (eb4c008e57d75491.a) swap on wd0b dump on wd0b
5. Disklabel
Code:
pelican~$ disklabel wd0 
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: WDC WD5000AAKX-0
duid: eb4c008e57d75491
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 60801
total sectors: 976773168
boundstart: 64
boundend: 976768065
drivedata: 0 

16 partitions:
#                size           offset  fstype [fsize bsize   cpg]
  a:          2097152               64  4.2BSD   2048 16384     1 # /
  b:          8861056          2097216    swap                    # none
  c:        976773168                0  unused                    
  d:          8388608         10958272  4.2BSD   2048 16384     1 # /tmp
  e:         25062144         19346880  4.2BSD   2048 16384     1 # /var
  f:          4194304         44409024  4.2BSD   2048 16384     1 # /usr
  g:          2097152         48603328  4.2BSD   2048 16384     1 # /usr/X11R6
  h:        104856896         50700480  4.2BSD   2048 16384     1 # /usr/local
  i:          4192960        155557376  4.2BSD   2048 16384     1 # /usr/src
  j:        251658240        159750336  4.2BSD   2048 16384     1 # /home
pelion~$

Last edited by ocicat; 31st July 2017 at 11:04 PM. Reason: Please use [code] & [/code] tags when posting command output.
Reply With Quote
  #4   (View Single Post)  
Old 31st July 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,884
Default

Thank you! This eliminates a number of possibilities, such as some sort of issue with full disk encryption, or a "jump" upgrade. You are attempting to upgrade a -current system from July 22.

There were two changes to the install.sub script since July 22, but neither seem to apply to this. And there was a single change to the amd64-specific install.md on July 28, which also doesn't appear to apply.

Based on the information you provided, I believe your best bet is to submit a problem report to the bugs@ mailing list. Here are two links that can help:

http://www.openbsd.org/report.html

http://www.openbsd.org/mail.html
Reply With Quote
  #5   (View Single Post)  
Old 31st July 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default

OK will do. Thanks.
Reply With Quote
  #6   (View Single Post)  
Old 31st July 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,884
Default

Hrmmm... your problem might be related to this:

http://marc.info/?t=150144528300001&r=1&w=2
Reply With Quote
  #7   (View Single Post)  
Old 31st July 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,884
Default

On second thought, that problem is specific to EFI booting, and you aren't using EFI on that hardware.

(If you're not sure, then you aren't using EFI. You'd know if you were using EFI/GPT booting instead of BIOS/MBR booting.)

Last edited by jggimi; 31st July 2017 at 11:53 PM. Reason: clarity
Reply With Quote
  #8   (View Single Post)  
Old 1st August 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default

Yes, I'd seen that too, but I'm not using EFI.
Reply With Quote
  #9   (View Single Post)  
Old 1st August 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default

Something else odd: I tried bsd.rd from the 6.1 release and this also failed (without the message), even though I have successfully done several upgrades which were later than the release.

I had to go back to 6.0 to find a bsd.rd that worked. I don't understand this. Some hardware fault??? Try reinstall???
Reply With Quote
Old 1st August 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,884
Default

The install and upgrade scripts are both Bourne shell scripts that use the same underlying shell script functions. So, while it's possible a fresh install would work, it's also possible it won't. The root cause has not been determined.

You may be able to watch the script run, with # sh -x upgrade but I've never done this myself, as I haven't had this sort of issue. The rescue kernel has many reduced-function tools to save real estate, and I don't know if the shell has had any function reductions.

I'd report the problem, as recommended earlier.

Last edited by jggimi; 1st August 2017 at 04:27 PM. Reason: clarity, possible debug with -x
Reply With Quote
Old 1st August 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default

Yes, I've repoorted it, so I'll see what haopens. I'm reluctant to try reinstall because at least I have a working system at present.
Reply With Quote
Old 3rd August 2017
acampbell acampbell is offline
Real Name: Anthony Campbell
Fdisk Soldier
 
Join Date: Sep 2014
Location: London, UK
Posts: 76
Default upgrade failure: wd0 is not a valid root disk - Solved

Thanks to Robert Peichaer on the OBSD bugs list, I found the error: /mnt was missing on the boot drive. Repairing this has made bsd.work again.
Reply With Quote
Old 3rd August 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,884
Default

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
QT5 install failure philo_neo71 NetBSD Package System (pkgsrc) 1 26th March 2016 10:52 PM
kernel build failure jjstorm OpenBSD Installation and Upgrading 2 1st March 2016 02:07 PM
The Failure of the GPL vermaden Off-Topic 9 6th September 2009 05:11 PM
Disk geometry for Seagate disk phreud FreeBSD Installation and Upgrading 5 8th November 2008 10:51 PM
link: `libtheora_la-common.lo' is not a valid libtool object error during compilation pax FreeBSD Ports and Packages 2 29th July 2008 11:30 AM


All times are GMT. The time now is 09:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick