DaemonForums  

Go Back   DaemonForums > Miscellaneous > General Hardware

General Hardware General hardware related questions.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 27th July 2008
twisted_steel twisted_steel is offline
Port Guard
 
Join Date: May 2008
Posts: 12
Default

My new box is up and running. I used the VIA EPIA LN10000EG Mini-ITX Mainboard with 1GB of RAM and a 160GB 2.5" HDD. Installation was done using PXE Boot and the 4.3 'pxeboot' image. I did a full recompile for 4.3-stable on the box in just over 3 hours.

Here is the dmesg:

Quote:
OpenBSD 4.3-stable (GENERIC) #0: Sat Jul 26 13:50:52 UTC 2008
root@<host.domain>:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,S SE3,EST,TM2
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 1005023232 (958MB)
avail mem = 963633152 (918MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/19/07, BIOS32 rev. 0 @ 0xf9440, SMBIOS rev. 2.3 @ 0xf0000 (24 entries)
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc594
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc500/144 (7 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x2000
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1000, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
agp0 at pchb0: v3, aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 1 drive 0: <WDC WD1600BEVS-07RST0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x56494183 (VIA Technologies <83>)
ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address 00:40:63:f6:32:3b
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ff6d netmask ff6d ttymask ffef
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Last edited by twisted_steel; 27th July 2008 at 12:40 PM. Reason: Added some more info to the top
Reply With Quote
 

Tags
alix, hardware, mini-itx, soekris, via epia

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need suggestions on what to name this project TerryP Off-Topic 10 6th November 2010 03:13 PM
Thin Client cases and Mini ITX boards Oko General Hardware 2 15th April 2009 02:25 AM
Cheap, FreeBSD compatible mini PC? chris General Hardware 2 26th September 2008 06:28 AM
Mac Mini aleunix Other BSD and UNIX/UNIX-like 6 18th August 2008 12:35 PM
Software suggestions rex FreeBSD General 10 17th May 2008 12:00 AM


All times are GMT. The time now is 06:30 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick