DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD General

NetBSD General Other questions regarding NetBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 9th September 2008
vermaden's Avatar
vermaden vermaden is offline
Administrator
 
Join Date: Apr 2008
Location: pl_PL.lodz
Posts: 1,056
Default Your NetBSD Laptop

So this is the thread for info about working (or not) laptops with NetBSD.

I do not have any NetBSD running laptop so I will not share any info currently

As for startup info about running NetBSD on laptop you may check this info:
http://www.tumfatig.net/dmesg/
http://www.netbsd.org/~jlam/cgd_laptop.html
http://tuxmobil.org/mobile_bsd.html
http://wiki.netbsd.se/IBM_Thinkpad_T23
http://wiki.netbsd.se/IBM_Thinkpad_X40
http://wiki.netbsd.se/IBM_Thinkpad_T43p
http://wiki.netbsd.se/Compaq_Presario_M2005US
http://google.com/search?q=netbsd+laptop

Other laptop threads:
*BSD Laptops
Alternative Architecture Laptops

(if you have any other interesting resources for NetBSD laptop then let me know or just add a post to this thread with them)
__________________
religions, worst damnation of mankind
"If 386BSD had been available when I started on Linux, Linux would probably never had happened." Linus Torvalds

Linux is not UNIX! Face it! It is not an insult. It is fact: GNU is a recursive acronym for “GNU's Not UNIX”.
vermaden's: links resources deviantart spreadbsd
Reply With Quote
  #2   (View Single Post)  
Old 27th September 2008
Pjoter's Avatar
Pjoter Pjoter is offline
Shell Scout
 
Join Date: Sep 2008
Posts: 92
Default

1. Almos fully working is Thinkpad T61. Below please find attached dmesg.

From the hardware range following are working great:

WiFi (Intel 3945ABG)
Sound
Networkcard
Graphic crad (3D is working)
Mulitimedia buttons

Unfortunately these are not working or haven't been checked:

SD reader (not working)
Modem (not checked)
Firewire (noy checked)


Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.72 (THINKPAD) #8: Thu Aug  7 22:37:29 CEST 2008
        root@thinkpad.localhost.org:/usr/obj/sys/arch/i386/compile/THINKPAD
total memory = 982 MB
avail memory = 959 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 6463Y1K (ThinkPad T61)
PCI BIOS rev. 3.0 found at 0xfdda7
pcibios: config mechanism [1][x], special cycles [x][x], last bus 24
PCI IRQ Routing Table rev. 1.0 found at 0xfde40, size 368 bytes (21 entries)
pcibios_pir_init: bad IRQ table checksum
PCI BIOS has 21 Interrupt Routing table entries
pci_intr_fixup: no compatible PCI ICU found
Warning: unable to fix up PCI interrupt routing
mainbus0 (root)
pci_addr_fixup: 000:31:2 0x8086 0x2828 new address 0x00005800
pci_addr_fixup: 000:31:2 0x8086 0x2828 new address 0x00005808
pci_addr_fixup: 000:31:2 0x8086 0x2828 new address 0x00005810
pci_addr_fixup: 000:31:2 0x8086 0x2828 new address 0x0000580c
cpu0 at mainbus0 apid 0: Intel 686-class, 1795MHz, id 0x6fd
cpu0: Enhanced SpeedStep (1420 mV) 2000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1800 1600 1400 1200
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu1 at mainbus0 apid 1: Intel 686-class, 1795MHz, id 0x6fd
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <LENOVO,TP-7L   ,00002190>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer0 at acpi0 (TIMR, PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc0 at acpi0 (KBD, PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (MOU, IBM0057): aux port
pckbc1: irq 12
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): ACPI Embedded Controller (disabled)
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, 42T4504 21367
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using CMOS at \UCMS
thinkpad0: using EC at acpiecdt0
WMI0 (PNP0C14) at acpi0 not configured
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 100.0C passive 40.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer0: attached to pcppi0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82965PM Host Bridge (rev. 0x0c)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga0 at pci0 dev 2 function 0: Intel 82965PM Integrated Graphics Device (rev. 0x0c)
vga0: WARNING: ignoring 64-bit BAR @ 0x10
vga0: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
i915drm0 at vga0: Intel i965PM (unit 0)
i915drm0: AGP at 0xe0000000 256MB
i915drm0: Initialized i915 1.5.0 20060119
Intel 82965PM Integrated Graphics Device (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
Intel 82965PM MEI Controller (miscellaneous communications, revision 0x0c) at pci0 dev 3 function 0 not configured
Intel 82965PM IDE Interface (IDE mass storage, interface 0x85, revision 0x0c) at pci0 dev 3 function 2 not configured
Intel 82965PM Serial Interface (serial communications, interface 0x02, revision 0x0c) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1e:37:18:9f:ef
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17
wpi0: MoW2, address 00:1c:bf:0f:1b:ce
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: Intel 82801H PCI Express Port #3 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x03)
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x03)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xba)
fwohci0 at pci6 dev 0 function 1: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:17:0c:b2
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Ricoh 5C822 PCI-CardBus bridge/MS/SD/MMC/SC (SD Host Controller system, revision 0x21) at pci6 dev 0 function 2 not configured
Ricoh 5C843 PCI-CardBus bridge/SD/MMC/MMC+/MS/xD/Firewire (miscellaneous system, revision 0x11) at pci6 dev 0 function 3 not configured
Ricoh 5C592 PCI-CardBus bridge/MS/SD/Firewire (miscellaneous system, revision 0x11) at pci6 dev 0 function 4 not configured
Ricoh xD-Picture Card Controller (miscellaneous system, revision 0x11) at pci6 dev 0 function 5 not configured
cbb0: cacheline 0x0 lattimer 0x20
cbb0: bhlc 0x822000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801HEM LPC (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: HPET window not mapped, skipping
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801HEM Serial ATA Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1795659930 Hz quality 3000
azalia0: codec[0]: Analog Devices AD1984 (rev. 4.0), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
uhub3 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ubt0 at uhub3 port 1
ubt0: Cambridge Silicon Radio BT2.0, rev 2.00/31.64, addr 2
wd0 at atabus0 drive 0: <WDC WD1600BEVS-08RST2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <DVD/CDRW UJDA775, , CB03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/dev/cgd0g: file system not clean (fs_clean=0); please fsck(8)
/dev/cgd0g: lost blocks 0 files 0
bthub0 at ubt0 local-bdaddr 00:09:dd:60:7a:fa
i915drm0: interrupting at ioapic0 pin 16
info: [drm] had to remove pid 1461 still in file list
info: [drm] had to remove pid 956 still in file list
i915drm0: interrupting at ioapic0 pin 16
Reply With Quote
  #3   (View Single Post)  
Old 19th October 2008
mateo319 mateo319 is offline
New User
 
Join Date: Oct 2008
Posts: 8
Default

I have a Sony VAIO VGN-S560P laptop which is 100% working since NetBSD 3.0. For those not familiar with the specs, it's about 3 years old, has a 1.86 Ghz Centrino processor, 1GB RAM, 100GB hard drive, NVIDIA semi-integrated graphics, B/G wireless.

In short, the machine runs like a dream, snappy and responsive. I dual boot with XP for games.
Reply With Quote
  #4   (View Single Post)  
Old 6th June 2009
Mr-Biscuit Mr-Biscuit is offline
Banned
 
Join Date: May 2008
Posts: 272
Default

Sony Vaio PCG-GRZ530. P4 2.4 GHz. 512M RAM. NetBSD 5.0. It runs.
I have to compile programs in tty and not gui to prevent overworking and overheating. Stays on 24 to 49 hours before shutdown in tty mode and 4 to 8 hours in gui mode. Using WindowMaker and Xfce4 as desktops with kde and gnome applications. JIbbed live cd was used whenever had trouble with X. I'll enable Linux compat later.
Reply With Quote
  #5   (View Single Post)  
Old 8th June 2009
SPlissken SPlissken is offline
Port Guard
 
Join Date: Oct 2008
Posts: 10
Thumbs up

Actully posting from my eeePC 701 4G
Every thing work fine except wireless, have to see how to make it work

SPeeeNetBSD$ uname -a
NetBSD SPeeeNetBSD.SP.net 5.0_STABLE NetBSD 5.0_STABLE (GENERIC) #0: Sat Jun 6 06:40:31 PDT 2009 builds@wb24:/home/builds/ab/netbsd-5/i386/200906060002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC i386
SPeeeNetBSD$

Using fluxbox, pidgin, firefox3, mrxvt, mplayer , have compiled all of them

Here is dmesg

Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Sat Jun  6 06:40:31 PDT 2009
        builds@wb24:/home/builds/ab/netbsd-5/i386/200906060002Z-obj/home/builds/
ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK Computer INC. 701 (x.x)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 630MHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,03000803>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A00) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: ASUS, LION, 701
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
asus0 at acpi0 (ATKD, ASUS010-16843008)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
pchb0: returns constant 0xff stream, RNG disabled.
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev
2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04)
pci1 at ppb0 bus 4
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04)
pci2 at ppb1 bus 3
pci2: memory space enabled, rd/line, wr/inv ok
lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet
lii0: Ethernet address 00:1f:c6:52:fa:cd
lii0: interrupting at ioapic0 pin 17
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0002, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04)
pci3 at ppb2 bus 1
pci3: memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci4 at ppb3 bus 5
pci4: no spaces enabled!
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: ENE UB6225, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable
sd0: fabricating a geometry
sd0: 3904 MB, 3904 cyl, 64 head, 32 sec, 512 bytes/sect x 7995392 sectors
sd0: fabricating a geometry
wd0 at atabus1 drive 0: <SILICONMOTION SM223AC>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 3815 MB, 7753 cyl, 16 head, 63 sec, 512 bytes/sect x 7815024 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Reply With Quote
  #6   (View Single Post)  
Old 8th June 2009
s0xxx's Avatar
s0xxx s0xxx is offline
Package Pilot
 
Join Date: May 2008
Posts: 192
Default

@SPlissken

There is a patch to make the wireless working, see this page for more details: http://www.netbsd.org/ports/i386/netbook.html

This thread also: http://mail-index.netbsd.org/netbsd-...msg003585.html

Let us know if it works.
__________________
The best way to learn UNIX is to play with it, and the harder you play, the more you learn.
If you play hard enough, you'll break something for sure, and having to fix a badly broken system is arguably the fastest way of all to learn. -Michael Lucas, AbsoluteBSD
Reply With Quote
  #7   (View Single Post)  
Old 28th June 2009
SPlissken SPlissken is offline
Port Guard
 
Join Date: Oct 2008
Posts: 10
Default

well , i had several problem when trying to patch ath-0.10.5.10.patch
And kernel does not compile

I had several time this message
The text leading up to this was:
--------------------------
|Index: dev/ic/athrate.h
|================================================= ==================
|RCS file: /cvsroot/src/sys/dev/ic/athrate.h,v
|retrieving revision 1.2
|diff -u -r1.2 athrate.h
|--- dev/ic/athrate.h 5 Feb 2006 06:03:26 -0000 1.2
|+++ dev/ic/athrate.h 21 Sep 2008 22:38:58 -0000
--------------------------
File to patch:
No file found--skip this patch? [n] y
Skipping patch...
Hunk #1 ignored at 138.

And when trying to compile kernel i had link problem because usr/src was on external hard drive on fat file system because i have size issue on my 4Go SSD
ln: libintl.h: Operation not supported
configure: error: can not link libintl.h to /mnt/archos/usr/src/tools/binutils/../../gnu/dist/binutils/intl/libgettext.h
Reply With Quote
  #8   (View Single Post)  
Old 29th June 2009
s0xxx's Avatar
s0xxx s0xxx is offline
Package Pilot
 
Join Date: May 2008
Posts: 192
Default

Quote:
Originally Posted by SPlissken View Post
well , i had several problem when trying to patch ath-0.10.5.10.patch
Sorry, my fault, it should be:
Code:
# cd /usr/src/sys
# patch < /path/ath-0.10.5.10.patch
Quote:
Originally Posted by SPlissken View Post
And when trying to compile kernel i had link problem because usr/src was on external hard drive on fat file system because i have size issue on my 4Go SSD
ln: libintl.h: Operation not supported
configure: error: can not link libintl.h to /mnt/archos/usr/src/tools/binutils/../../gnu/dist/binutils/intl/libgettext.h
It fails most likely because FAT file system doesn't support symlinks. You would need FFS for that.
But, maybe you could try something like this:
Code:
BSDSRCDIR=/mnt/archos/usr/src                # <- Put that entry in /etc/mk.conf

# build.sh -T /ffs_system/test/tools \
           -D /ffs_system/test/destdir \
           -R /ffs_system/test/release \
           -O /ffs_system/test/obj tools kernel=GENERIC
Of course you would need to create those directories before starting build.sh, and they have to reside on a FFS partition.
I'm not on a NetBSD system and cannot check this right now, so I cannot tell you if this works. Experiment with options and see if it helps.
__________________
The best way to learn UNIX is to play with it, and the harder you play, the more you learn.
If you play hard enough, you'll break something for sure, and having to fix a badly broken system is arguably the fastest way of all to learn. -Michael Lucas, AbsoluteBSD
Reply With Quote
  #9   (View Single Post)  
Old 29th June 2009
SPlissken SPlissken is offline
Port Guard
 
Join Date: Oct 2008
Posts: 10
Default

Ok thanks, i will try
may be some forum admin could create one topic "NetBSD on eeePC" so that this thread will not be spoiled by our discussion
Reply With Quote
Old 30th June 2009
s0xxx's Avatar
s0xxx s0xxx is offline
Package Pilot
 
Join Date: May 2008
Posts: 192
Default

Quote:
Originally Posted by SPlissken View Post
may be some forum admin could create one topic "NetBSD on eeePC" so that this thread will not be spoiled by our discussion
Not a bad idea.
Glad to hear everything works on your eeePC 701 4G. Did you actually try to use ath and did you get the ppb-hotplug patch?
__________________
The best way to learn UNIX is to play with it, and the harder you play, the more you learn.
If you play hard enough, you'll break something for sure, and having to fix a badly broken system is arguably the fastest way of all to learn. -Michael Lucas, AbsoluteBSD
Reply With Quote
Old 30th June 2009
SPlissken SPlissken is offline
Port Guard
 
Join Date: Oct 2008
Posts: 10
Default

No i didn't try to use ath for the moment
And no i didn't patch for ppb-hotplug , i don't see what it is for...
Reply With Quote
Old 30th June 2009
SPlissken SPlissken is offline
Port Guard
 
Join Date: Oct 2008
Posts: 10
Default

Ok , so, i achieved to patch and added also graphic hardware acceleration by adding
i915drm* at vga? # Intel i915, i945 DRM driver
in kernel conf file

Here is the new uname
SPeeeNetBSD$ uname -a
NetBSD SPeeeNetBSD.SP.net 5.0.0_PATCH NetBSD 5.0.0_PATCH (KERNSP) #0: Mon Jun 29 23:34:52 CEST 2009 splissken@SPeeeNetBSD.SP.net:/mnt/archos/usr/obj/sys/arch/i386/compile/KERNSP i386
SPeeeNetBSD$

and new dmesg
Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.0_PATCH (KERNSP) #0: Mon Jun 29 23:34:52 CEST 2009
	splissken@SPeeeNetBSD.SP.net:/mnt/archos/usr/obj/sys/arch/i386/compile/KERNSP
total memory = 503 MB
avail memory = 482 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK Computer INC. 701 (x.x)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 630MHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,03000803>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A00): aux port
pckbc2: irq 12
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: ASUS, LION, 701  
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
asus0 at acpi0 (ATKD, ASUS010-16843008)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
pchb0: returns constant 0xff stream, RNG disabled.
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i915GM (unit 0)
i915drm0: AGP at 0xd0000000 256MB
i915drm0: Initialized i915 1.5.0 20060119
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04)
pci1 at ppb0 bus 4
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04)
pci2 at ppb1 bus 3
pci2: memory space enabled, rd/line, wr/inv ok
lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet
lii0: Ethernet address 00:1f:c6:52:fa:cd
lii0: interrupting at ioapic0 pin 17
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0002, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04)
pci3 at ppb2 bus 1
pci3: memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 14.2 phy 7.0 radio 10.2
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci4 at ppb3 bus 5
pci4: no spaces enabled!
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: ENE UB6225, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable
sd0: fabricating a geometry
sd0: 3904 MB, 3904 cyl, 64 head, 32 sec, 512 bytes/sect x 7995392 sectors
sd0: fabricating a geometry
wd0 at atabus1 drive 0: <SILICONMOTION SM223AC>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 3815 MB, 7753 cyl, 16 head, 63 sec, 512 bytes/sect x 7815024 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Message about ath was
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18
ath0: unable to attach hardware; HAL status 13

and now it disappeared so , i think it s ok when i see this
SPeeeNetBSD$ ifconfig ath0
ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ssid ""
powersave off
address: 00:15:af:78:e3:c3
media: IEEE802.11 autoselect
status: no network
SPeeeNetBSD$

Thanks again for help

Last edited by SPlissken; 30th June 2009 at 06:01 AM.
Reply With Quote
Old 30th June 2009
SPlissken SPlissken is offline
Port Guard
 
Join Date: Oct 2008
Posts: 10
Default

Well , Fn F2 was already working out of box
Reply With Quote
Old 28th September 2010
acottag acottag is offline
New User
 
Join Date: Jul 2010
Posts: 9
Default

Hello!

Here are the specifications of the laptop machine I have NetBSD 5.0.2 installed.

So far, NetBSD recognized all subsystems; I hope to get a full working system: wireless cell modem, sound and graphics.

All the best.
  • Manufacturer/model: HP Pavillion dv5000 (dv5097ea)
  • Processor: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
  • RAM memory: 1GB
  • Main disk drive: TOSHIBA MK1031GAS, ATA DISK drive, 100GB
  • Optical disc drive: TSSTcorpCD/DVDW TS-L532M ATAPI CD/DVD-ROM drive, ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
  • Screen:15.4-inch, WXGA, TFT (1280 × 800)
  • Graphics card: ATI Technologies Inc Radeon XPRESS 200M 5955
  • Main pointing device: SynPS/2 Synaptics TouchPad
  • Secondary pointing device: Logitech v550 Nano Cordless Laser Mouse
Reply With Quote
Old 21st March 2011
kdu kdu is offline
Port Guard
 
Join Date: Jun 2009
Posts: 25
Default

Acer Aspire 5515.

Everything works out of the box.
Reply With Quote
Old 19th October 2011
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 1,027
Default

I recently got a lowish-end laptop, the HP 2000-240CA.

It has an AMD E-350 processor, which is designed for low power consumption. It does seem to run pretty cool. It doesn't have a numeric keypad.

Below I'm attaching dmesgs for NetBSD amd64 current, and also for Linux 2.6.38.7 x86_64.

I will post an OpenBSD dmesg in the OpenBSD Laptop Thread.

Some items of note that are not (yet) supported by NetBSD are:

* Radeon HD 6310 graphics (but VESA driver is fine)

* Realtek card reader

* Realtek RTL8188CE wireless
Attached Files
File Type: gz dmesg-Linux.gz (14.2 KB, 120 views)
File Type: gz dmesg-NetBSD.gz (3.4 KB, 130 views)

Last edited by IdOp; 19th October 2011 at 06:09 PM.
Reply With Quote
Old 9th December 2011
nickbeee nickbeee is offline
Real Name: Nick B.
New User
 
Join Date: Dec 2011
Location: Nottingham/UK
Posts: 1
Default Toshiba Portege 3110CT

NetBSD 5.1 - had to compile a custom kernel due to limited memory. No X11 as I'm running this as an IPv6 tunnel router.

Interface re0 is an additional cardbus gigabit ethernet card.

Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (PORTEGE_G1) #0: Sat Nov  5 20:19:50 GMT 2011
	root@NetBSD-VM1.NoWindows:/usr/src/sys/arch/i386/compile/PORTEGE_G1
total memory = 65020 KB
avail memory = 57660 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
TOSHIBA P3110CT/6.4 (Version 1.0)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 299MHz, id 0x66a
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId , AslId 
LNKA: ACPI: Found matching pin for 0.11.INTA at func 0: 255
LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.4.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 3
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKD: ACPI: Found matching pin for 0.12.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (PIT, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
sysbeep0 at pcppi1
npx0 at acpi0 (NDP, PNP0C04): io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
FDD (PNP0700) at acpi0 not configured
COM (PNP0501) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: (null), Li-ION  , XM2020P02    1000020420
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
VALD (TOS6200) at acpi0 not configured
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 96.0C active cooling level 1: 96.0C critical 97.0C passive 29.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7194 (rev. 0x01)
vga1 at pci0 dev 4 function 0: vendor 0x1023 product 0x9525 (rev. 0x49)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x7198 (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 0 not configured
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82440MX IDE controller (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x719a (rev. 0x00)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x719b (rev. 0x00)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
oboe0 at pci0 dev 9 function 0: Toshiba Fast Infrared Type O, revision 0
oboe0: interrupting at irq 11
irframe0 at oboe0: SIR, MIR, FIR
cbb0 at pci0 dev 11 function 0: vendor 0x1179 product 0x0617 (rev. 0x20)
esm0 at pci0 dev 12 function 0: vendor 0x125d product 0x1978 (rev. 0x10)
esm0: interrupting at irq 11
esm0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esm0: full duplex, playback, capture, mmap, independent
vendor 0x11c1 product 0x0441 (miscellaneous communications, revision 0x01) at pci0 dev 13 function 0 not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 20
pcmcia0 at cardslot0
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
re0 at cardbus0 function 0: Realtek 10/100/1000baseT
re0: Ethernet address 00:10:60:13:a2:a2
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wd0 at atabus0 drive 0: 
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Reply With Quote
Old 4th February 2012
thirdm thirdm is offline
Spam Deminer
 
Join Date: May 2009
Posts: 248
Default

This is some kind of unbranded Asus laptop I bought from my roommate. Had trouble installing the OS I usually use (OpenBSD) and NetBSD seemed happier with it than the other ones I tried (FreeBSD and Debian). The wireless seems to more or less work (iirc I installed over the wireless card, which wasn't possible in FreeBSD or Debian), but I've been using a wire because it seemed a little flaky (don't remember off hand why). I see some errors in my logs I don't understand and haven't investigated yet because I'm using the machine only minimally: "Feb 4 14:31:27 felix dhclient: send_packet: Input/output error"

I wonder what's in this machine that's made it so problematic. Someday I'll try to look into why OpenBSD choked on it.

Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 1527 MB
avail memory = 1464 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xfcd90 (44 entries)
ASUSTeK Computer Inc.         Z35FM                (1.0       )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1995MHz, id 0x6f6
cpu0: Enhanced SpeedStep (1340 mV) 2000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1833 1667 1500 1333 1167 1000
cpu1 at mainbus0 apid 1: Intel 686-class, 1995MHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A.M.I.,OEMRSDT ,09000714>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ATKD (ATK0100) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A06) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: ASUSTEK, LIon,   
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpitz0 at acpi0 (THRM): active cooling level 0: 60.0C critical 105.0C passive 34.0C
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: disabling notification events
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 4
pci2: memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4222 (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17
wpi0: MoW1, address 00:13:02:1a:b1:b4
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
fwohci0 at pci3 dev 3 function 0: vendor 0x1180 product 0x0832 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 21
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:76:07:ec
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci3 dev 3 function 1: vendor 0x1180 product 0x0822 (rev. 0x19)
sdhc0: interrupting at ioapic0 pin 20
sdmmc0 at sdhc0
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x01) at pci3 dev 3 function 2 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x0a) at pci3 dev 3 function 3 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x05) at pci3 dev 3 function 4 not configured
rtk0 at pci3 dev 4 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20
rtk0: Ethernet address 00:18:f3:cf:55:06
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1995145440 Hz quality 3000
azalia0: codec[0]: 0x10ec/0x0660 (rev. 0.1), HDA rev. 1.0
azalia0: codec[1]: 0x1057/0x3055 (rev. 7.0), HDA rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, playback, capture, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <TSSTcorpCD/DVDW TS-L632D, , AS05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <ST980825A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wpi0: Radio is disabled by hardware switch
wpi0: cannot assign link-local address
wpi0: Radio is disabled by hardware switch
wpi0: fatal firmware error
wpi0: Radio is disabled by hardware switch
wpi0: fatal firmware error
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Reply With Quote
Old 27th February 2013
shep shep is offline
Real Name: Scott
Arp Constable
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 1,503
Default

Before I recognized that the OpenBSD bootloader was causing trouble on a very old ECS A900 desknote (Via C3 cpu and Sis video) I tried NetBSD 6.0.1-patch and had trouble with xorg. Apparently xf86-video-sis requires the sis-drm module which is not enabled in the generic kernel. The thought of pulling down the kernel source, compiling a custom kernel and then building a lightweight desktop on an 800mHz Single core cpu was overwhelming.
Reply With Quote
Old 27th February 2013
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 1,027
Default

Quote:
Originally Posted by shep View Post
The thought of pulling down the kernel source, compiling a custom kernel and then building a lightweight desktop on an 800mHz Single core cpu was overwhelming.
Cross-compiling on a more powerful machine could be considered.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NetBSD laptop thread Mr-Biscuit Guides 1 10th June 2009 05:51 AM
NetBSD on a laptop: trying to make it work Mr-Biscuit NetBSD Installation and Upgrading 1 1st June 2009 01:43 AM
Laptop Repair DrJ General Hardware 4 25th August 2008 02:30 PM
laptop cw_ FreeBSD General 21 14th August 2008 02:48 AM
NetBSD + old laptop adventure anomie NetBSD General 4 27th June 2008 01:57 PM


All times are GMT. The time now is 01:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick