|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
seagate drive issue
Hi guys, I have an installation of OpenBSD 4.6 with 6 disk drives connected to onboard sata on an Intel DP43TF motherboard.
My drives are: sd0,1,2 = Seagate Baracuda 750GB sd3,4,5 = Samsung 1TB spinpoint F1 None of the drives are in a raid config, just standard partitioning with Disklabel. I seem to be experiencing really slow speeds with the Seagate drives, approximately 20MB/s while the Samsung drives are doing around 70MB/s. I have tried the generic.sp kernel as well as disable acpi. Could this be a firmware issue with my drives? I can't see anything in the dmesg output but with my limited openbsd experience i thought id ask for help. Code:
OpenBSD 4.6 (GENERIC.MP) #81: Thu Jul 9 21:26:19 MDT 2009 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3216707584 (3067MB) avail mem = 3107082240 (2963MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe84b0 (58 entries) bios0: vendor Intel Corp. version "NBG4310H.86A.0069.2008.1117.2016" date 11/17/2008 bios0: Intel Corporation DP43TF acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC MCFG ASF! HPET acpi0: wakeup devices P0P1(S3) PS2K(S3) PS2M(S3) UAR1(S5) USB0(S3) USB1(S3) USB2(S3) USB5(S3) USB3(S3) USB4(S3) PEX0(S3) PEX1(S3) PEX2(S3) PEX3(S3) PEX4(S3) GBE_(S4) P0P2(S3) EUSB(S3) USBE(S3) SLPB(S4) PWRB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, 2494.13 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz, 2493.75 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 0 pa 0xfec00000, version 20, 24 pins acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PEX0) acpiprt2 at acpi0: bus -1 (PEX1) acpiprt3 at acpi0: bus -1 (PEX2) acpiprt4 at acpi0: bus 3 (PEX3) acpiprt5 at acpi0: bus -1 (PEX4) acpiprt6 at acpi0: bus 4 (P0P2) acpicpu0 at acpi0:, C3, C2, C1, PSS acpicpu1 at acpi0:, C3, C2, C1, PSS acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB cpu0: Enhanced SpeedStep 2493 MHz: speeds: 2500, 1200 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 0 int 16 (irq 11) pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) vendor "Intel", unknown product 0x2e24 (class communications subclass miscellaneous, rev 0x03) at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH10 R BM V" rev 0x00: apic 0 int 20 (irq 10), address 00:1c:c0:a3:18:de uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 16 (irq 11) uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 5) uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 3) ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 3) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 0 int 17 (irq 7) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 3 "Intel 82801JI PCIE" rev 0x00: apic 0 int 19 (irq 4) pci3 at ppb2 bus 3 jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00 pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 0 int 19 (irq 4) for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GH22NP20, 1.04> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 disabled (no drives) uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 23 (irq 11) uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 19 (irq 4) uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 3) ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 23 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci4 at ppb3 bus 4 re0 at pci4 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), apic 0 int 20 (irq 10), address 00:1e:2a:47:9a:dd rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: apic 0 int 19 (irq 4), AHCI 1.2 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ST3750330AS, SD15> SCSI3 0/direct fixed sd0: 715403MB, 512 bytes/sec, 1465147055 sec total sd1 at scsibus1 targ 1 lun 0: <ATA, ST3750330AS, SD15> SCSI3 0/direct fixed sd1: 715403MB, 512 bytes/sec, 1465147055 sec total sd2 at scsibus1 targ 2 lun 0: <ATA, ST3750330AS, SD1A> SCSI3 0/direct fixed sd2: 715404MB, 512 bytes/sec, 1465149168 sec total sd3 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed sd3: 953869MB, 512 bytes/sec, 1953525168 sec total sd4 at scsibus1 targ 4 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed sd4: 953869MB, 512 bytes/sec, 1953525168 sec total sd5 at scsibus1 targ 5 lun 0: <ATA, SAMSUNG HD103UJ, 1AA0> SCSI3 0/direct fixed sd5: 953869MB, 512 bytes/sec, 1953525168 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 0 int 18 (irq 3) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 wbsio0 port 0x290/2 not configured mtrr: Pentium Pro MTRR support uhidev0 at uhub5 port 1 configuration 1 interface 0 "CHICONY HP Basic USB Keyboard" rev 1.10/3.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 softraid0 at root root on sd0a swap on sd0b dump on sd0b |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PPPD issue. | Tom | NetBSD General | 4 | 26th August 2009 03:59 PM |
gdm/ new monitor issue | jimbus | FreeBSD General | 3 | 4th August 2009 07:39 PM |
Possible SMP Issue? | MetalHead | OpenBSD General | 1 | 25th November 2008 03:52 AM |
Disk geometry for Seagate disk | phreud | FreeBSD Installation and Upgrading | 5 | 8th November 2008 10:51 PM |
RAM issue | nikkon | FreeBSD General | 5 | 7th May 2008 04:26 AM |