DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 4th May 2008
s2scott's Avatar
s2scott s2scott is offline
Package Pilot
 
Join Date: May 2008
Location: Toronto, Ontario Canada
Posts: 198
Default CF, as wd0, 4.3 dmesg "DMA error"

Upgraded to 4.3, from 4.2, and all is good; however, the 4.3 dmesg newly reports the following, with regard to the COMPACT FLASH card, wd0,
Code:
...
softraid0 at root
wd0(pciide0:0:0): timeout
        type: ata
        c_bcount: 512
        c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0(pciide0:0:0): timeout
        type: ata
        c_bcount: 512
        c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
wd0: transfer error, downgrading to PIO mode 4
wd0(pciide0:0:0): using PIO mode 4
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wd0: soft error (corrected)
root on wd0a swap on wd0b dump on wd0b
...
None of this dmesg lines were in the 4.2 dmesg.

System is booted and running fine. Anyone with thoughts or suggestions? I was thinking about perhaps the wd flags 1111 1111 1100, or the like.

Also, the softraid0 is especially new dmesg inclusion.

/S
__________________
Never argue with an idiot. They will bring you down to their level and beat you with experience.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fixed "xinit" after _7 _8, "how" here in case anyones' "X" breaks... using "nvidia" jb_daefo Guides 0 5th October 2009 09:31 PM
"Thanks" and "Edit Tags". diw Feedback and Suggestions 2 29th March 2009 12:06 AM
"No package available in the PKG_PATH" error Nk2Network OpenBSD Packages and Ports 19 12th January 2009 09:22 PM
Scripted sysinstall fails with "Command 'system' failed" PeterSteele FreeBSD Installation and Upgrading 0 13th November 2008 11:31 PM


All times are GMT. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick