|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|
|||
lshw analog
Hello all.
Is there any 'lshw' analog for OpenBSD ? I'd like to write down the hardware of my OpenBSD box. I use 'dmesg' now, but I'm not sure if it shows the mainboard model (I know, it's Intel, and I see 'Intel' in the dmesg output, but I want to know the exact model). Are there any variants? Code:
rgets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b syncing disks... OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Atom(TM) CPU D425 @ 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF real mem = 2128760832 (2030MB) avail mem = 2083000320 (1986MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries) bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011 bios0: Intel Corporation D425KT acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG HPET SSDT acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 5 (P32_) acpiprt0: no apic found for irq 24 acpiprt1 at acpi0: bus 0 (PCI0) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpicpu0 at acpi0: C1 acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1: apic 8 int 16 drm0 at inteldrm0 azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi azalia0: codecs: Realtek ALC662 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17 pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 8 int 16, address 38:60:77:a3:28:24 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci5 at ppb4 bus 5 pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01 pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 8 int 18 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST500DM002-1BD142> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73 lm1 at wbsio0 port 0x290/8: W83627DHG npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/2.50 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/2.50 addr 2 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0 vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b syncing disks... OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Atom(TM) CPU D425 @ 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF real mem = 2128760832 (2030MB) avail mem = 2083000320 (1986MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries) bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011 bios0: Intel Corporation D425KT acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG HPET SSDT acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 5 (P32_) acpiprt0: no apic found for irq 24 acpiprt1 at acpi0: bus 0 (PCI0) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpicpu0 at acpi0: C1 acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1: apic 8 int 16 drm0 at inteldrm0 azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi azalia0: codecs: Realtek ALC662 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17 pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 8 int 16, address 38:60:77:a3:28:24 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci5 at ppb4 bus 5 pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01 pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 8 int 18 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST500DM002-1BD142> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73 lm1 at wbsio0 port 0x290/8: W83627DHG npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/2.50 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/2.50 addr 2 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0 vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b syncing disks... OpenBSD 5.3 (GENERIC) #50: Tue Mar 12 18:35:23 MDT 2013 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Atom(TM) CPU D425 @ 1.80GHz ("GenuineIntel" 686-class) 1.81 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF real mem = 2128760832 (2030MB) avail mem = 2083000320 (1986MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/24/11, SMBIOS rev. 2.5 @ 0x7ee98000 (24 entries) bios0: vendor Intel Corp. version "MWPNT10N.86A.0083.2011.0524.1600" date 05/24/2011 bios0: Intel Corporation D425KT acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG HPET SSDT acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 5 (P32_) acpiprt0: no apic found for irq 24 acpiprt1 at acpi0: bus 0 (PCI0) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus 4 (PEX3) acpicpu0 at acpi0: C1 acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1: apic 8 int 16 drm0 at inteldrm0 azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi azalia0: codecs: Realtek ALC662 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17 pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 8 int 16, address 38:60:77:a3:28:24 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci5 at ppb4 bus 5 pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01 pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 8 int 18 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST500DM002-1BD142> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73 lm1 at wbsio0 port 0x290/8: W83627DHG npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/2.50 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/2.50 addr 2 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0 vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (c020010c4212b3d3.a) swap on wd0b dump on wd0b |
|
|||
I believe what you want is highlighted below in your dmesg(8) output:
Quote:
http://www.intel.com/content/www/us/...rd-d425kt.html The BIOS is "MWPNT10N.86A" dated May 2011 which leads to the following found through Google: https://downloadcenter.intel.com/Det...&DwnldID=19519 Some of the same information can be found with the command: $ sysctl hw ...but you will find lots more system information simply by issuing: $ sysctl Studying the sysctl(8) manpage may also be in order. What specifically are you looking for? Last edited by ocicat; 21st August 2013 at 09:15 AM. Reason: clarity |
|
|||
I admire your complete answers, ocicat, and in those cases when I can help anybody, I try to answer in the same manner, with links and quotes.
Thank you! |
|
|