DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
Old 27th March 2016
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,448
Default

Quote:
Originally Posted by psypro View Post
Problems...
Open separate threads for each problem, and we'll try to help.
Reply With Quote
Old 19th April 2016
hanzer's Avatar
hanzer hanzer is offline
Real Name: Adam Jensen
cybernetic organism
 
Join Date: Oct 2013
Location: {cyborg, psyborg, sciborg} [non-]space
Posts: 182
Default Toshiba Satellite C855D-S5320

This walmart-grade laptop has an RTL8188CE Wireless LAN 802.11n PCI-E NIC. I tried FreeBSD-10.3/amd64 earlier today (primarily to explore the ZFS tech) but there's no driver for this NIC. There aren't even WinXP 64-bit drivers (from Realtek or Toshiba) for this NIC, so no FreeBSD NDIS driver could be built...

OpenBSD to the rescue. Some firmware (with the wired NIC set up and connected, a simple # fw_update -a after installation) was needed and it's running nicely. With some software configuration and tweaking, this tawdry hardware might begin to look like a sleek, elegant machine. Thanks OpenBSD!

Code:
OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3843809280 (3665MB)
avail mem = 3723116544 (3550MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe4800 (23 entries)
bios0: vendor Insyde Corp. version "6.00" date 08/21/2012
bios0: TOSHIBA Satellite C855D
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI HPET APIC MCFG ASF! BOOT SLIC WDRT WDAT SSDT FPDT MSDM SSDT SSDT
acpi0: wakeup devices PB6_(S4) SPB1(S5) SPB2(S4) SPB3(S4) OHC1(S3) OHC3(S3) EHC1(S3) EHC3(S3) XHC0(S3) P2P_(S5) LID0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD E2-1800 APU with Radeon(tm) HD Graphics, 1697.70 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD E2-1800 APU with Radeon(tm) HD Graphics, 1696.92 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB4_)
acpiprt2 at acpi0: bus -1 (PB5_)
acpiprt3 at acpi0: bus -1 (PB6_)
acpiprt4 at acpi0: bus -1 (PB7_)
acpiprt5 at acpi0: bus 2 (SPB0)
acpiprt6 at acpi0: bus 6 (SPB1)
acpiprt7 at acpi0: bus -1 (SPB2)
acpiprt8 at acpi0: bus -1 (SPB3)
acpiprt9 at acpi0: bus 1 (P2P_)
acpicpu0 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@100 io@0x841), C1(@1 halt!), PSS
acpipwrres0 at acpi0: PFA1, resource for FAN1
acpitz0 at acpi0: critical temperature is 105 degC
acpibtn0 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "PA502" serial C663 type Li-ion
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
cpu0: 1697 MHz: speeds: 1700 1360 850 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 7340" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
xhci0 at pci0 dev 16 function 0 "AMD Hudson-2 xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x00: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD0, AX0A> SCSI3 0/direct fixed naa.500003944708252e
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, CDDVDW SN-208AB, TO04> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x14: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00: apic 4 int 16
sdmmc0 at sdhc0
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
pci2 at ppb1 bus 2
rtwn0 at pci2 dev 0 function 0 "Realtek 8188CE" rev 0x01: msi
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address 24:ec:99:e0:24:83
ppb2 at pci0 dev 21 function 1 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 6
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), msi, address 00:8c:fa:22:a0:4e
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub1 port 3 "Generic USB2.0-CRW" rev 2.00/39.60 addr 2
uvideo0 at uhub2 port 4 configuration 1 interface 0 "Importek TOSHIBA Web Camera - HD" rev 2.00/12.12 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (16a48e6f3696db74.a) swap on sd0b dump on sd0b
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

Last edited by hanzer; 19th April 2016 at 09:55 PM. Reason: s/setup/set up/
Reply With Quote
Old 1st May 2016
Carpetsmoker's Avatar
Carpetsmoker Carpetsmoker is offline
Real Name: Martin
Old man from scene 24
 
Join Date: Apr 2008
Location: Bristol, UK
Posts: 2,168
Default

Running OpenBSD again:

Code:
OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 921239552 (878MB)
avail mem = 889176064 (847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf01f0 (19 entries)
bios0: vendor Acer version "V1.80" date 07/14/2006
bios0: Acer Aspire 5100
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC MCFG
acpi0: wakeup devices LID_(S3) PB3_(S4) PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) BB4_(S4) BB5_(S4) OHC1(S3) OHC2(S3) EHCI(S3) HDA_(S3) KBC0(S3) ELAN(S4) AUDO(S4) MODM(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) 64 X2 Mobile Technology TL-50, 1596.25 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) 64 X2 Mobile Technology TL-50, 1596.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-7
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB3_)
acpiprt2 at acpi0: bus 2 (PB4_)
acpiprt3 at acpi0: bus 4 (PB5_)
acpiprt4 at acpi0: bus -1 (PB6_)
acpiprt5 at acpi0: bus -1 (PB7_)
acpiprt6 at acpi0: bus 2 (BB4_)
acpiprt7 at acpi0: bus 4 (BB5_)
acpiprt8 at acpi0: bus 6 (P2P_)
acpiprt9 at acpi0: bus 1 (AGP_)
acpiprt10 at acpi0: bus -1 (PEG_)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 95 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
cpu0: PowerNow! K8 1596 MHz: speeds: 1600 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200M" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 17
ppb1 at pci0 dev 4 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 5 function 0 "ATI RS480 PCIE" rev 0x00
pci3 at ppb2 bus 4
ohci0 at pci0 dev 19 function 0 "ATI SB400 USB" rev 0x80: apic 2 int 19, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB400 USB" rev 0x80: apic 2 int 19, version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI SB400 USB2" rev 0x80: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SB400 SMBus" rev 0x83: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB400 IDE" rev 0x80: DMA, channel 0 configured to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9100824A>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
azalia0 at pci0 dev 20 function 2 "ATI SB450 HD Audio" rev 0x01: apic 2 int 16
azalia0: codecs: Realtek ALC883, Conexant/0x2bfa, 0x0000/0x0000, using Realtek ALC883
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB400 ISA" rev 0x80
ppb3 at pci0 dev 20 function 4 "ATI SB400 PCI" rev 0x80
pci4 at ppb3 bus 6
rl0 at pci4 dev 1 function 0 "Realtek 8139" rev 0x10: apic 2 int 21, address 00:16:d4:16:3b:41
rlphy0 at rl0 phy 0: RTL internal PHY
ath0 at pci4 dev 2 function 0 "Atheros AR2413" rev 0x01: apic 2 int 22
ath0: AR2413 7.8 phy 4.5 rf 5.6 eeprom 5.2, WOR3W, address 00:16:ce:6f:11:1e
cbb0 at pci4 dev 4 function 0 "ENE CB-712 CardBus" rev 0x10: apic 2 int 20
"ENE Memory Stick" rev 0x01 at pci4 dev 4 function 1 not configured
sdhc0 at pci4 dev 4 function 2 "ENE SD Controller" rev 0x01: apic 2 int 23
sdmmc0 at sdhc0
"ENE Flash memory" rev 0x01 at pci4 dev 4 function 3 not configured
"ENE SD/MMC" rev 0x01 at pci4 dev 4 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev BH-F2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub0 port 4 "Acer Labs USB2.0 Camera" rev 2.00/1.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (ac8ca2f442d5c8ec.a) swap on wd0b dump on wd0b
radeondrm0: 1280x800
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
It's a ten-year old laptop that I got from my girlfriend (after fixing it). Most things work quite well, except web browsers which are all slow as hell (all the usable ones, anyway), especially Firefox (which is a known problem, it seems).

Another thing that doesn't seem to work is suspending and resuming... Haven't looked too deeply into the source for that...
__________________
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
Reply With Quote
Old 2nd May 2016
Oko Oko is offline
Banned
 
Join Date: May 2008
Location: Kosovo, Serbia
Posts: 1,087
Default

Quote:
Originally Posted by Carpetsmoker View Post

It's a ten-year old laptop that I got from my girlfriend (after fixing it). Most things work quite well, except web browsers which are all slow as hell (all the usable ones, anyway), especially Firefox (which is a known problem, it seems).
People keep talking about it and I trust them but I personally have not had bad experience. I use OpenBSD as my desktop at home, I run it on my laptop ThinkPad X201 (all amd 64 5.9 stable) and browsers (firefox-esr 38.7.1 and chromium Version 48.0.2564.116 (64-bit)) are as fast as the one I use on my work desktop running Springdale 7.2 (RHEL Princeton University clone). Apparently things should be much better for people like you after 6.0 release due to bunch of changes which are removing the parts of Big Giant Lock/ scheduler patches. Check tech@openbsd.

Quote:
Originally Posted by Carpetsmoker View Post
Another thing that doesn't seem to work is suspending and resuming... Haven't looked too deeply into the source for that...
I don't use that but I think I have seen reports on misc@openbsd that this is broken on amd64 current at least (i386 works but I for one no longer personally use i386).
Reply With Quote
Old 2nd May 2016
acampbell acampbell is offline
Fdisk Soldier
 
Join Date: Sep 2014
Posts: 61
Default

Quote:
Originally Posted by Oko View Post
People keep talking about it and I trust them but I personally have not had bad experience. I use OpenBSD as my desktop at home, I run it on my laptop ThinkPad X201 (all amd 64 5.9 stable) and browsers (firefox-esr 38.7.1 and chromium Version 48.0.2564.116 (64-bit)) are as fast as the one I use on my work desktop running Springdale 7.2 (RHEL Princeton University clone). Apparently things should be much better for people like you after 6.0 release due to bunch of changes which are removing the parts of Big Giant Lock/ scheduler patches. Check tech@openbsd.


I don't use that but I think I have seen reports on misc@openbsd that this is broken on amd64 current at least (i386 works but I for one no longer personally use i386).
I posted this on misc@. It appears that it results from a modification made to prevent accidental waking from sleep if people are carrying a laptop and jolt it. I am using my Thinkpad Z61M as a desktop since my actual desktop broke and I found it useful to suspend the machine at night. But now it doesn't wake up after suspend, whether this is done by closing the lid or pressing Fn+F5.

I'm not optimistic that it will be fixed any time soon since apparently too few people are affected. See http://marc.info/?l=openbsd-bugs&m=145979568820455&w=2.

Jn the meantime I've inserted "machdep.lidsuspend=0" in /etc/systcl.conf so that I don' t find myself having to press the power button after absent-mindedly closing the lid.
Reply With Quote
Old 4th May 2016
acampbell acampbell is offline
Fdisk Soldier
 
Join Date: Sep 2014
Posts: 61
Default Update

After today's upgrade to the latest snapsshot suspend/recovery is working correctly again!
Reply With Quote
Old 5th May 2016
hanzer's Avatar
hanzer hanzer is offline
Real Name: Adam Jensen
cybernetic organism
 
Join Date: Oct 2013
Location: {cyborg, psyborg, sciborg} [non-]space
Posts: 182
Default Correction: {Open, Free}BSD both have problems on this laptop.

Quote:
Originally Posted by hanzer View Post
This walmart-grade laptop has an RTL8188CE Wireless LAN 802.11n PCI-E NIC. I tried FreeBSD-10.3/amd64 earlier today (primarily to explore the ZFS tech) but there's no driver for this NIC. There aren't even WinXP 64-bit drivers (from Realtek or Toshiba) for this NIC, so no FreeBSD NDIS driver could be built...

OpenBSD to the rescue. Some firmware (with the wired NIC set up and connected, a simple # fw_update -a after installation) was needed and it's running nicely. With some software configuration and tweaking, this tawdry hardware might begin to look like a sleek, elegant machine. Thanks OpenBSD!
I installed CentOS-7 with the Mate desktop back onto the machine: stable functionality has been restored. The CentOS culture is a bit difficult to live with - I feel like a [non-paying] customer or maybe like a guest in a hotel (or a squatter) - the system doesn't feel like it's mine. I suspect that aspect of the culture is somewhat by design.
Reply With Quote
Old 3 Weeks Ago
e1-531g e1-531g is offline
Spam Deminer
 
Join Date: Mar 2014
Location: Country:Poland;Continent:Europe
Posts: 255
Default

I have recently bought used Wifi card for my laptop. Intel Centrino 622ANHMW. I confirm OpenBSD can use this card as usable,practicable network interface.
Code:
# sysctl kern.version                                                          
kern.version=OpenBSD 6.0-current (GENERIC.MP) #8: Sat Dec  3 22:18:48 MST 2016
    build@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
# dmesg | grep -e iwn                                          
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi, MIMO 2T2R, MoW, address ********
# lspci comes from ports (./sysutils/pciutils)
# lspci -nn | grep Centrino                                                    
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:422c] (rev 35)
__________________
Signature: Furthermore, I consider that systemd must be destroyed.
Based on Latin oratorical phrase

Last edited by e1-531g; 3 Weeks Ago at 01:01 PM.
Reply With Quote
Old 2 Weeks Ago
psypro psypro is offline
Shell Scout
 
Join Date: Mar 2016
Location: Continent:Europe
Posts: 105
Default

Lenovo Ideapad 310, i3 6100.
Integrated wireless does not work, I use a tp link tlwn722n.
Track-pad with separate buttons for right and left mouse, works in cwm with out any need to configure.

Code:
OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8474288128 (8081MB)
avail mem = 8212983808 (7832MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x87601000 (71 entries)
bios0: vendor LENOVO version "0XCN37WW" date 10/03/2016
bios0: LENOVO 80SM
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI UEFI MSDM SSDT DBGP DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT DMAR FPDT BGRT
acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3) RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3) PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz, 2195.60 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz, 2194.88 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz, 2194.88 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz, 2194.88 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpibat0 at acpi0: BAT0 model "L15C2PB5" serial  3791 type LiP oem "CPT-COS 1"
"VPC2004" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"MSFT0001" at acpi0 not configured
"SYN2B59" at acpi0 not configured
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2195 MHz: speeds: 2301, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1300, 1200, 1100, 900, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
"Intel HD Graphics 520" rev 0x07 at pci0 dev 2 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZYTY256, MAT6> SCSI3 0/direct fixed naa.5002538d00000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address c8:5b:76:79:94:f0
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Conexant/0x510f, Intel/0x2809, using Conexant/0x510f
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
efifb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
athn0 at uhub0 port 3 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 2
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Generic EasyCamera" rev 2.00/53.07 addr 3
video0 at uvideo0
ugen0 at uhub0 port 5 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
ugen1 at uhub0 port 7 "Atheros Communications product 0xe360" rev 2.01/0.01 addr 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (0ba0a796b382be9a.a) swap on sd0b dump on sd0b
athn0: AR9271 rev 1 (1T1R), ROM rev 13, address 74:ea:3a:93:c9:54
Reply With Quote
Old 17 Hours Ago
livestradamus livestradamus is offline
New User
 
Join Date: Nov 2016
Posts: 2
Default

Still very, very new to OpenBSD and running -stable marvelously on a HP ProBook 450G1 laptop (i7 4th gen proc. w/ 16GB RAM)
Everything works great out of the box. I disable the switchable graphics and stay with the Intel HD video, WiFi is smooth.
I run a herbstluftwm, everything else lives in the st (simple terminal) tmux and ssh.
Now thinking about it, I wish I had a beefy desktop or server grade hardware to run this OS

Have a good day all.
Reply With Quote
Old 10 Hours Ago
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,448
Default

Quote:
Originally Posted by livestradamus View Post
Still very, very new to OpenBSD and running -stable marvelously ...
Hello and welcome!
Quote:
.. on a HP ProBook 450G1 laptop (i7 4th gen proc. w/ 16GB RAM)...Now thinking about it, I wish I had a beefy desktop or server grade hardware to run this OS...
That's "beefier" than any system I have.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Your FreeBSD Laptop vermaden FreeBSD General 67 6th June 2014 12:27 PM
OpenBSD = Awesome Laptop OS revzalot OpenBSD General 8 9th September 2008 07:12 AM
Laptop Repair DrJ General Hardware 4 25th August 2008 02:30 PM
laptop cw_ FreeBSD General 21 14th August 2008 02:48 AM
Dual-boot laptop won't boot OpenBSD after upgrade to 4.3 kbeaucha OpenBSD Installation and Upgrading 17 30th May 2008 02:40 PM


All times are GMT. The time now is 05:24 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick