![]() |
|
OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD. |
![]() |
|
Thread Tools | Display Modes |
|
|||
![]()
Hello,
My friend gave me a banged up old Toshiba Satellite 1805-S253 laptop. The battery was long dead and the hard drive was constantly corrupting OSes installed onto it. I decided to make it my dedicated workshop machine. All I want it to do is play MP3s and have applications for a calculator and text editor. I didn't want to buy a new HDD or boot from a CD or flash drive, so I thought I'd use a floppy (or two if I absolutely have to). I thought at first I'd make a MSDOS boot disk (as I'm pretty familiar with DOS) and put a sound driver with applications that met my needs. As it turned out, there are no drivers for this laptop's sound card for DOS, so DOS on a floppy was ruled out. I knew that I'd never get a version of Windows on a floppy that could use the Windows drivers for the laptop, plus I just don't want Windows on this thing anyway, so none of that. Next, I looked around for a distro of Linux that fits on a floppy. I couldn't really find what I was looking for, all of the ones I found either wouldn't detect my sound card or were meant for things like turning old PCs into firewalls or raid drives or whatnot. I was starting to get frustrated until I found a OpenBSD 4.1 based distro that fits on a floppy... KarmaBSD: http://www.freebsd.nfo.sk/opbsd/karmabsdeng.htm It detected my sound card and played MP3s flawlessly with MPG123, so I decided to go with it. I then went hunting for the calculator and text editor, since they weren't included (I think it has "ed" in it, but I need more luxury than that ![]() Calcoo gives me a nondescript error message "Abort trap" and ee gives me a bunch of jumbled letters. I have a feeling I shouldn't put only the binaries on the disk, but the entire package... I'm wondering if anyone can tell me what I'm doing wrong, or give me any tips or anything, or any suggestions of different apps other than the ones I've chosen. Perhaps I should be worrying about prerequisites (and if that's the case, then I doubt I can fit these all on one disk), and perhaps the apps are screwing up because the disk is being mounted to "/mnt" which I think might be a read only directory. I can maneuver around in a unix shell well enough, but I'm not extremely competent either, so any help is appreciated. Also, I want to know how to check the space left on a floppy disk. I'm hoping that I can put the two apps on the same floppy as the OS and mpg123, but as they weigh a little under 300 kb altogether, I'm starting to doubt it. I don't really mind using two floppies though. I'm just eager to play music in my shop so I can distract myself at the table saw and cut my fingers off. ![]() Last edited by insomniadmx; 13th April 2009 at 08:28 PM. |
|
||||
![]() Quote:
|
|
|||
![]() Quote:
Quote:
Quote:
This package index may have even been for a different architecture.. OpenBSD supports far more then your traditional x86-based laptop. And in conclusion, OpenBSD 4.1 is not supported anymore.. nor are 3rd party derivatives.. please consider obtaining either a replacement hard drive or a sufficient USB flash device. Using the official installation CD-ROM would be your best choice, even a default installation is quite small when compared with other modern Unix systems. |
|
||||
![]()
BSDfan666's recommendation of a USB device is an excellent one; the entire OS will fit nicely on a 512MB stick, though a more modern stick (with more storage) would be recommended, to eliminate the write-lifespan-limitations of earlier technology, and allow the installation of packages. Or an external USB disk drive could be used. USB storage devices appear as SCSI hard drives to the OS (sd0, sd1, ...), and if your BIOS allows, could be bootable. If not, you could still boot from floppy or CD, yet have your root and other partitions remain on USB.
Another option is a LiveCD. I offer six different ISOs for different purposes, one of which might meet your needs. (The 4.5-release versions are in beta test and available, if interested.) There were a lot of LiveCD versions of OpenBSD over the years, as far as I know, mine and Stephan Rickauer's (bsdanywhere.org) are the only general purpose ones that are maintained. Stephan has a much cooler website than I do ... his is very pretty, mine is just some static pages written with OpenOffice. We've traded technical information; much that we do under the covers is similar, though we have different goals in mind. (There is one special purpose LiveCD that is also maintained and supported. It's called LOCKSS, and is used in library preservation. See www.lockss.org for info.) |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
what linux distro do you use and/or like? | ephemera | Other BSD and UNIX/UNIX-like | 211 | 4 Weeks Ago 04:37 PM |
A name for an embedded FreeBSD-based OS | nimnod | Off-Topic | 15 | 16th March 2009 03:06 PM |
Remote OpenBSD ssh-based install problems | artix | OpenBSD Installation and Upgrading | 7 | 13th March 2009 08:52 PM |
Own FreeBSD Distro | anritsu | FreeBSD Ports and Packages | 10 | 7th October 2008 03:02 PM |
Adding drives annoys OpenBSD. | diw | OpenBSD General | 4 | 4th September 2008 02:14 AM |