|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
DVI output in X
I recently got a new video card (ATI Radeon HD 4350). It has VGA & DVI out. VGA works fine in both console and X.
Since my monitor supports HDMI, I decided to try connecting it with a DVI↔HDMI cable, disconnecting the VGA cable to make sure it wouldn’t get involved. When I start up the computer, the console shows up just fine. When I startx, though, I get a solid red screen with an error message: “Out of range.” (The message comes from the monitor, not X.) Anyone know why this might happen? Do I need to set some X options (I’m running without an xorg.conf)? Code:
OpenBSD 4.8-current (GENERIC) #496: Wed Nov 24 01:46:11 MST 2010 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) II X4 630 Processor ("AuthenticAMD" 686-class, 512KB L2 cache) 2.82 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT real mem = 3487723520 (3326MB) avail mem = 3420626944 (3262MB) User Kernel Config UKC> disable acpi 473 acpi0 disabled UKC> exit Continuing... mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/23/10, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0x9f400 (68 entries) bios0: vendor American Megatrends Inc. version "2105" date 07/23/2010 bios0: ASUSTeK Computer INC. M4A785TD-V EVO acpi at bios0 function 0x0 not configured mpbios0 at bios0: Intel MP Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured mpbios0: bus 0 is type PCI mpbios0: bus 1 is type PCI mpbios0: bus 2 is type PCI mpbios0: bus 3 is type PCI mpbios0: bus 4 is type PCI mpbios0: bus 5 is type ISA ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5460/384 (22 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x439d pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc0000/0xf200 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00 ppb0 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 18 (irq 10) pci1 at ppb0 bus 1 vendor "Conexant", unknown product 0x8880 (class multimedia subclass video, rev 0x04) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 17 (irq 11) pci2 at ppb1 bus 2 vga1 at pci2 dev 0 function 0 "ATI Radeon HD 4350" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 4 int 17 (irq 11) drm0 at radeondrm0 azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 4000 HD Audio" rev 0x00: apic 4 int 18 (irq 10) azalia0: no supported codecs azalia0: initialization failure, detaching ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 18 (irq 10) pci3 at ppb2 bus 3 re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 4 int 18 (irq 10), address 48:5b:39:ae:c8:e1 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22 (irq 10), AHCI 1.1 scsibus0 at ahci0: 32 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7240S, 1.03> ATAPI 5/cdrom removable sd0 at scsibus0 targ 2 lun 0: <ATA, WDC WD6400AAKS-6, 01.0> SCSI3 0/direct fixed sd0: 610480MB, 512 bytes/sec, 1250263728 sec total ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16 (irq 11), version 1.0, legacy support ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16 (irq 11), version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 10), version 1.0, legacy support ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 10), version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI iic0 at piixpm0 iic0: addr 0x20 01=19 02=24 03=2e 04=00 05=00 06=00 07=00 08=00 09=00 0a=10 0b=10 0c=10 0d=10 0e=08 0f=8c 10=3d 11=00 12=00 13=00 14=0a 15=0a 16=20 17=9e 18=e0 1a=ae 1b=a4 1c=b3 1d=00 1e=0c 1f=01 20=01 21=01 22=01 23=bb 3e=bb b2=09 b3=27 b5=09 words 00=ff19 01=1924 02=242e 03=2e00 04=0000 05=0000 06=0000 07=0000 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <ST340014A> wd0: 16-sector PIO, LBA48, 38146MB, 78125000 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16 (irq 11) azalia1: codecs: VIA/0x0397 audio0 at azalia1 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 pci4 at ppb3 bus 4 "VIA VT6306 FireWire" rev 0xc0 at pci4 dev 8 function 0 not configured ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 10), version 1.0, legacy support pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci2: USB revision 1.0 uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb5 at ohci3: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0x290 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb6 at ohci4: USB revision 1.0 uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support uhidev0 at uhub2 port 1 configuration 1 interface 0 "RetroUSB.com SNES RetroPort" rev 1.00/0.00 addr 2 uhidev0: iclass 3/0 uhid0 at uhidev0: input=4, output=0, feature=0 uhidev1 at uhub2 port 2 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uaudio0 at uhub4 port 3 configuration 1 interface 0 "Logitech Logitech USB Headset" rev 2.00/10.13 addr 2 uaudio0: audio rev 1.00, 7 mixer controls audio1 at uaudio0 uhidev2 at uhub4 port 3 configuration 1 interface 3 "Logitech Logitech USB Headset" rev 2.00/10.13 addr 2 uhidev2: iclass 3/0 uhid1 at uhidev2: input=2, output=0, feature=0 uhidev3 at uhub5 port 1 configuration 1 interface 0 "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.26 addr 2 uhidev3: iclass 3/1 ukbd0 at uhidev3: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev4 at uhub5 port 1 configuration 1 interface 1 "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.26 addr 2 uhidev4: iclass 3/0, 4 report ids ums1 at uhidev4 reportid 1: 3 buttons wsmouse1 at ums1 mux 0 uhid2 at uhidev4 reportid 2: input=1, output=0, feature=0 uhid3 at uhidev4 reportid 3: input=3, output=1, feature=0 uhid4 at uhidev4 reportid 4: input=0, output=0, feature=4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b
__________________
Many thanks to the forum regulars who put time and effort into helping others solve their problems. |
|
|||
To get an xorg.conf file, you could follow the procedure outlined in http://openbsd.org/faq/faq11.html#amd64i386
If you still have issues with the xorg.conf, post the xorg.conf and the /var/log/Xorg.0.log so we can have a look at it.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump |
|
||||
Out of range messages on monitors means that the default video mode cannot be displayed. Use FAQ 11 along with the modeline setting guide and tools in http://www.x.org/wiki/FAQVideoModes
|
|
|||
You should really not disable ACPI on newer systems, it's possible for things to overheat without proper power management.
If it doesn't work, you should file a bug report, along with an acpidump. As for the monitor issues, manually configuring modelines is almost never necessary.. DDC information is sent over the wire, check your Xorg.0.log file. |
|
|||
Quote:
I should probably upgrade before trying anything else, although I doubt it would fix the DVI problem (but who can say?). I’ll get back to this.
__________________
Many thanks to the forum regulars who put time and effort into helping others solve their problems. |
|
|||
Yeah, OpenBSD's radeon driver is sadly lagging behind a bit.. but it'll probably get updated eventually.
Updating the snapshot to get the ACPI fix is probably a good idea, I wouldn't put it off for too long. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PHP displays no output what-so-ever on some errors. | Carpetsmoker | Programming | 9 | 9th November 2010 09:55 PM |
netstat -s -p ip output meaning | putrycy | FreeBSD General | 3 | 20th August 2010 08:29 AM |
output to a file in java | c0mrade | Programming | 4 | 15th October 2009 07:55 AM |
dwm status bar won't display apm output | asemisldkfj | General software and network | 6 | 16th August 2009 11:07 PM |
strange dmesg output | gosha | OpenBSD General | 4 | 11th March 2009 01:10 PM |