|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
httpd(8) and php-fpm no dynamic content
Hello.
Could someone please help me to set up httpd(8) and php-fpm?
Code:
OpenBSD 5.8-current (GENERIC.MP) #1378: Thu Sep 24 20:47:17 MDT 2015 deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP real mem = 510156800 (486MB) avail mem = 490647552 (467MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (73 entries) bios0: vendor Dell Inc. version "A03" date 08/05/2005 bios0: Dell Inc. OptiPlex GX620 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.48 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,NXE,LONG cpu0: 1MB 64b/line 8-way L2 cache mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=0, max=0 (bogus) cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,NXE,LONG cpu1: 1MB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 4 (PCI4) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus 3 (PCI3) acpiprt3 at acpi0: bus 1 (PCI1) acpiprt4 at acpi0: bus -1 (PCI5) acpiprt5 at acpi0: bus -1 (PCI6) acpiprt6 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!) acpicpu1 at acpi0: C1(@1 halt!) acpibtn0 at acpi0: VBTN pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: msi pci1 at ppb0 bus 1 vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: apic 8 int 16, 1280x1024 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:12:3f:53:d0:ca brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 pci4 at ppb3 bus 4 auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: apic 8 int 23, ICH7 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 ignored (disabled) pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 8 int 20 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <ST3250310CS> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 rum0 at uhub0 port 1 configuration 1 interface 0 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:24:01:60:db:b8 uhidev0 at uhub1 port 2 configuration 1 interface 0 "CHICONY HP Basic USB Keyboard" rev 1.10/3.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (b0fdfdb6049106bb.a) swap on wd0b dump on wd0b
Code:
# $OpenBSD: httpd.conf,v 1.14 2015/02/04 08:39:35 florian Exp $ # # Macros # ext_addr="*" # # Global Options # # prefork 3 # # Servers # # A minimal default server server "default" { listen on $ext_addr port 80 root "/htdocs/www" # Logging is enabled by default, but it can be turned off per server #no log location "/*" { directory auto index # directory { index index.php index.html } log style combined } location "*.php$" { fastcgi socket "run/php-fpm.sock" } } # Include MIME types instead of the built-in ones types { include "/usr/share/misc/mime.types" }
Code:
[global] [www] listen.owner = www listen.group = www listen.mode = 0660 user = www listen = /var/www/run/php-fpm.sock pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 3 chroot = /var/www
Code:
[27-Sep-2015 15:13:37] NOTICE: Terminating ... [27-Sep-2015 15:13:37] NOTICE: exiting, bye-bye! [27-Sep-2015 15:13:38] NOTICE: fpm is running, pid 20304 [27-Sep-2015 15:13:38] NOTICE: ready to handle connections [27-Sep-2015 15:25:52] NOTICE: Terminating ... [27-Sep-2015 15:25:52] NOTICE: exiting, bye-bye! [27-Sep-2015 15:25:53] ERROR: FPM initialization failed [27-Sep-2015 15:26:25] NOTICE: fpm is running, pid 19341 [27-Sep-2015 15:26:25] NOTICE: ready to handle connections Last edited by ocicat; 27th September 2015 at 06:03 PM. Reason: Please use [code] & [/code] tags when posting console output. |
|
|||
The first problem that I notice is that the location directive doesn't support regex. Remove the $ symbol.
"/htdocs/www" also doesn't seem right. Did you mean to use the default directory? If so, it should be "/htdocs". The default php-fpm config will be fine. I'd leave it alone. |
|
|||
Quote:
Code:
$ cat /etc/httpd.conf # $OpenBSD: httpd.conf,v 1.14 2015/02/04 08:39:35 florian Exp $ # # Macros # ext_addr="*" # # Global Options # # prefork 3 # # Servers # # A minimal default server server "default" { listen on $ext_addr port 80 root "/htdocs" # Logging is enabled by default, but it can be turned off per server #no log location "/*" { directory auto index # directory { index index.php index.html } log style combined } location "*.php" { fastcgi socket "/run/php-fpm.sock" } } # Include MIME types instead of the built-in ones types { include "/usr/share/misc/mime.types" } Unfortunately still it does not work for me. I do not see any errors in my logs. |
|
||||
Adam, this thread has some working examples which may help you.
http://daemonforums.org/showthread.php?t=8965 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pf by content? | phyro | OpenBSD Security | 2 | 7th February 2013 09:40 AM |
Content Filtering with OpenBSD | alpha202ej | OpenBSD Security | 4 | 21st December 2011 01:38 PM |
block illegal content | wesley | OpenBSD Security | 1 | 25th December 2010 05:31 PM |
Web content filtering | Crypt | FreeBSD Security | 14 | 14th December 2008 02:38 PM |