DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
Old 18th February 2017
hitest's Avatar
hitest hitest is offline
Real Name: George Nielsen
Package Pilot
 
Join Date: Sep 2008
Location: B.C., Canada
Posts: 217
Default

My old HP G62 laptop. It has a dual core 2.2 GHz CPU, 4 GB RAM, a 400GB HD. Everything works out of the box on OpenBSD 6.0/amd.

Code:
OpenBSD 6.0 (RAMDISK_CD) #2100: Tue Jul 26 13:05:59 MDT 2016
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4004769792 (3819MB)
avail mem = 3881680896 (3701MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe7800 (22 entries)
bios0: vendor Hewlett-Packard version "F.29" date 04/07/2011
bios0: Hewlett-Packard HP G62 Notebook PC
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II P340 Dual-Core Processor, 2194.82 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus -1 (PB2_)
acpiprt3 at acpi0: bus -1 (PB3_)
acpiprt4 at acpi0: bus 2 (PB5_)
acpiprt5 at acpi0: bus 3 (PB6_)
acpiprt6 at acpi0: bus 4 (P2P_)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0303" at acpi0 not configured
"*SYN1E28" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C32" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon HD 4200 HD Audio" rev 0x00 at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address ec:55:f9:b8:6c:91
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xffff0000/0x10000
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 98:4b:e1:9b:05:6b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54505, PB4O> SCSI3 0/direct fixed naa.5000cca5f6e1163a
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0300> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
"ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
"SuYin HP Webcam-101" rev 2.00/4.21 addr 2 at uhub0 port 3 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... 
OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4004769792 (3819MB)
avail mem = 3878924288 (3699MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe7800 (22 entries)
bios0: vendor Hewlett-Packard version "F.29" date 04/07/2011
bios0: Hewlett-Packard HP G62 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT
acpi0: wakeup devices PB2_(S5) PB3_(S4) PB5_(S5) PB6_(S4) USB0(S3) USB1(S3) USB4(S3) USB5(S3) USB6(S3) PS2K(S3) PS2M(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II P340 Dual-Core Processor, 2194.82 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II P340 Dual-Core Processor, 2194.51 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xf7000000, bus 0-15
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus -1 (PB2_)
acpiprt3 at acpi0: bus -1 (PB3_)
acpiprt4 at acpi0: bus 2 (PB5_)
acpiprt5 at acpi0: bus 3 (PB6_)
acpiprt6 at acpi0: bus 4 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: PWRB
"PNP0303" at acpi0 not configured
"*SYN1E28" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial   type NiMH oem "Hewlett-Packard"
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C32" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 2194 MHz: speeds: 2200 1600 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 4 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address ec:55:f9:b8:6c:91
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xffff0000/0x10000
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 98:4b:e1:9b:05:6b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54505, PB4O> SCSI3 0/direct fixed naa.5000cca5f6e1163a
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0300> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Realtek/0x0270
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uvideo0 at uhub0 port 3 configuration 1 interface 0 "SuYin HP Webcam-101" rev 2.00/4.21 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7915a829f59a5c73.a) swap on sd0b dump on sd0b
r600_cp: Failed to load firmware "radeon-rs780_pfp"
error: [drm:pid0:r600_startup] *ERROR* Failed to load firmware!
drm:pid0:r600_init *ERROR* disabling GPU acceleration
drm:pid0:radeon_bo_unpin *WARNING* 0xffff80000031c340 unpin not necessary
drm:pid0:radeon_bo_unpin *WARNING* 0xffff80000031c340 unpin not necessary
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
OpenBSD 6.0 (GENERIC.MP) #2: Mon Oct 17 10:22:47 CEST 2016
    root@stable-60-amd64.mtier.org:/binpatchng/work-binpatch60-amd64/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4004769792 (3819MB)
avail mem = 3878924288 (3699MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe7800 (22 entries)
bios0: vendor Hewlett-Packard version "F.29" date 04/07/2011
bios0: Hewlett-Packard HP G62 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT
acpi0: wakeup devices PB2_(S5) PB3_(S4) PB5_(S5) PB6_(S4) USB0(S3) USB1(S3) USB4(S3) USB5(S3) USB6(S3) PS2K(S3) PS2M(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II P340 Dual-Core Processor, 2196.27 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II P340 Dual-Core Processor, 2194.53 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xf7000000, bus 0-15
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus -1 (PB2_)
acpiprt3 at acpi0: bus -1 (PB3_)
acpiprt4 at acpi0: bus 2 (PB5_)
acpiprt5 at acpi0: bus 3 (PB6_)
acpiprt6 at acpi0: bus 4 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: PWRB
"PNP0303" at acpi0 not configured
"*SYN1E28" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial   type NiMH oem "Hewlett-Packard"
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C32" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 2196 MHz: speeds: 2200 1600 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 4 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address ec:55:f9:b8:6c:91
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xffff0000/0x10000
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 98:4b:e1:9b:05:6b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54505, PB4O> SCSI3 0/direct fixed naa.5000cca5f6e1163a
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0300> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Realtek/0x0270
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uvideo0 at uhub0 port 3 configuration 1 interface 0 "SuYin HP Webcam-101" rev 2.00/4.21 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7915a829f59a5c73.a) swap on sd0b dump on sd0b
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... 
OpenBSD 6.0 (GENERIC.MP) #2: Mon Oct 17 10:22:47 CEST 2016
    root@stable-60-amd64.mtier.org:/binpatchng/work-binpatch60-amd64/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4004769792 (3819MB)
avail mem = 3878924288 (3699MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe7800 (22 entries)
bios0: vendor Hewlett-Packard version "F.29" date 04/07/2011
bios0: Hewlett-Packard HP G62 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SLIC SSDT
acpi0: wakeup devices PB2_(S5) PB3_(S4) PB5_(S5) PB6_(S4) USB0(S3) USB1(S3) USB4(S3) USB5(S3) USB6(S3) PS2K(S3) PS2M(S3) P2P_(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II P340 Dual-Core Processor, 2196.22 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II P340 Dual-Core Processor, 2194.53 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xf7000000, bus 0-15
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus -1 (PB2_)
acpiprt3 at acpi0: bus -1 (PB3_)
acpiprt4 at acpi0: bus 2 (PB5_)
acpiprt5 at acpi0: bus 3 (PB6_)
acpiprt6 at acpi0: bus 4 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _CRT
acpitz0: THRM: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: PWRB
"PNP0303" at acpi0 not configured
"*SYN1E28" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial   type NiMH oem "Hewlett-Packard"
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C32" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: VGA_
cpu0: 2196 MHz: speeds: 2200 1600 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 4 int 18
azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address ec:55:f9:b8:6c:91
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xffff0000/0x10000
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 98:4b:e1:9b:05:6b
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54505, PB4O> SCSI3 0/direct fixed naa.5000cca5f6e1163a
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, CDDVDW TS-L633R, 0300> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 4 int 16
azalia1: codecs: Realtek/0x0270
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uvideo0 at uhub0 port 3 configuration 1 interface 0 "SuYin HP Webcam-101" rev 2.00/4.21 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7915a829f59a5c73.a) swap on sd0b dump on sd0b
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
$
__________________
hitest

Last edited by hitest; 18th February 2017 at 07:39 PM. Reason: addition
Reply With Quote
Old 21st February 2017
hitest's Avatar
hitest hitest is offline
Real Name: George Nielsen
Package Pilot
 
Join Date: Sep 2008
Location: B.C., Canada
Posts: 217
Default

My Lenovo T410. It has an i5 2.4 GHz CPU, 4 GB RAM, and a 230 GB HD. Everything works out of the box with OpenBSD 6.0/amd. I installed OpenBSD with cat5 and DHCP. The wireless firmware installed after the first reboot.

Code:
OpenBSD 6.0 (GENERIC.MP) #2: Mon Oct 17 10:22:47 CEST 2016
    root@stable-60-amd64.mtier.org:/binpatchng/work-binpatch60-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3935088640 (3752MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6IET74WW (1.34 )" date 10/25/2010
bios0: LENOVO 25222AU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 1197.21 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 1197.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 1197.00 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 1197.00 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 13 (EXP5)
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4793" serial  8661 type LION oem "Panasonic"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
"*pnp0c14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 1197 MHz: speeds: 2400, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address f0:de:f1:37:56:0d
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi, MIMO 2T2R, MoW, address 58:94:6b:6b:f1:e8
ppb2 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 1 int 16
sdhc0: SDHC 1.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"Ricoh 5U230 Memory Stick" rev 0x01 at pci4 dev 0 function 1 not configured
"Ricoh 5U832 Firewire" rev 0x01 at pci4 dev 0 function 3 not configured
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 14
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54322, ESBZ> SCSI3 0/direct fixed naa.5000cca615cacc37
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD-RAM UJ892, SB01> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
pci6 at mainbus0 bus 255
pchb1 at pci6 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci6 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci6 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci6 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci6 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci6 dev 2 function 3 "Intel Reserved" rev 0x02
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/3.60 addr 4
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/23.45 addr 5
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (242c3fef13600cdc.a) swap on sd0b dump on sd0b
__________________
hitest
Reply With Quote
Old 12th April 2017
aht0 aht0 is offline
Port Guard
 
Join Date: Nov 2014
Posts: 16
Default

Dell Latitude E6400
I've been using it as guinea pig. Differences from "stock" model:
- Bluetooth mPCIe replaced by Lenovo F5521GW UMTS modem (curiosity, It does not seem to function as a modem in this slot though),
- added UMTS modem Dell DW5570 (originally meant for different model)
- original HDD replaced by old Intel 160GB SATA SSD.

What works:
Wifi (after I downloaded necessary firmware)
Suspend/Resume (my 1y old toddler opened-closed laptop's lid like a hundred times in a row, going into resume and coming out of it continued working perfectly)
Graphics - works out of the box.
Built-in SD card reader

Haven't tested yet -
Built-in smartcard reader:
DW5570 (I believe it would work, I lack the SIM card for testing but ifconfig is showing the following
Quote:
index 5 priority 0 llprio 3
roaming disabled registration not registered
state open cell-class none
SIM not initialized PIN valid (3 attempts left)
device MC8805 IMEI (I hid it) firmware SWI9X15C_05.05.47.00
dmesg output
Quote:
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 4228173824 (4032MB)
avail mem = 4095356928 (3905MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6500 (57 entries)
bios0: vendor Dell Inc. version "A34" date 06/04/2013
bios0: Dell Inc. Latitude E6400
acpi0 at bios0: rev 2
acpi0: TCPA checksum error
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT
acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S3) RP05(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 635.00 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NX E,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 619.01 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NX E,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus 13 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(100@162 mwait.3@0x50), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(100@162 mwait.3@0x50), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 107 degC
"PNP0F13" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0501" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x200114e4 rev 0x30
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL PT43699" serial 7 type LION oem "Samsung SDI"
acpibat1 at acpi0: BAT1 not present
"*pnp0c14" at acpi0 not configured
acpials0 at acpi0: ALS_
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID_
acpivout0 at acpivideo1: LCD_
acpivideo2 at acpi0: VID2
cpu0: Enhanced SpeedStep 635 MHz: speeds: 2401, 2400, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:21:70:dd:35:ff
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 12
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:22:fb:09:77:c6
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 3
cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 19
"Ricoh 5C832 Firewire" rev 0x04 at pci4 dev 1 function 1 not configured
sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18
sdhc0: SDHC 1.0, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"Ricoh 5C843 MMC" rev 0x11 at pci4 dev 1 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSA2M160, 2CV1> SCSI3 0/direct fixed naa.500151795944e3cb
sd0: 152627MB, 512 bytes/sector, 312581808 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD-ROM DU10N, 1.06> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL6 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL6 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: ALPS Dualpoint, version 0x6222
wsmouse1 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
umodem0 at uhub0 port 1 configuration 1 interface 1 "Lenovo F5521gw" rev 2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 1 configuration 1 interface 3 "Lenovo F5521gw" rev 2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub0 port 1 configuration 1 interface 9 "Lenovo F5521gw" rev 2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen0 at uhub0 port 1 configuration 1 "Lenovo F5521gw" rev 2.00/0.00 addr 2
umb0 at uhub1 port 6 configuration 2 interface 12 "Sierra Wireless, Incorporated Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card" rev 2.00/0.06 addr 2
ugen1 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (cd330a5ad8a370c4.a) swap on sd0b dump on sd0b
scsibus4 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <Sandisk, SA08G, 0014> SCSI2 0/direct removable
sd1: 7388MB, 512 bytes/sector, 15130624 sectors
Reply With Quote
Old 23rd July 2017
Trihex's Avatar
Trihex Trihex is offline
Real Name: Trihexagonal
Port Guard
 
Join Date: Jul 2017
Location: Over the hills and far away
Posts: 43
Default

Here's my OpenBSD Thinkpad W520 with Intel Quad Core i7-2760QM @ 2.40GHz, 8GB RAM, and NVIDIA Quadro 1000M with 96 CUDA cores and Optimus Technology. Where I had to work to get Optimus lined out on FreeBSD, OpenBSD handled it with no problem:

Code:
OpenBSD 6.1 (RAMDISK_CD) #19: Sat Apr  1 13:49:18 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8451125248 (8059MB)
avail mem = 8191250432 (7811MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbae9c000 (69 entries)
bios0: vendor LENOVO version "8BET56WW (1.36 )" date 01/19/2012
bios0: LENOVO 42763JU
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT UEFI UEFI UEFI
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.55 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2392548200 Hz
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"LEN0068" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfff80000/0x80000
vendor "NVIDIA", unknown product 0x0dfa (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel 6 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address f0:de:f1:fd:10:c5
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 6 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 8c:70:5a:88:29:f4
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
"Ricoh 5U832 Firewire" rev 0x04 at pci5 dev 0 function 3 not configured
ppb5 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci6 at ppb5 bus 14
xhci0 at pci6 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel QM67 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, D005> SCSI3 0/direct fixed naa.5000c5002f6d8789
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7740H, 1.S0> ATAPI 5/cdrom removable
"Intel 6 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub3 at uhub0 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
"UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3 at uhub3 port 3 not configured
"Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 4 at uhub3 port 6 not configured
umass0 at uhub1 port 3 configuration 1 interface 0 "SanDisk Cruzer" rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer, 1100> SCSI2 0/direct removable serial.07815530111104591803
sd1: 7633MB, 512 bytes/sector, 15633408 sectors
uhub4 at uhub2 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... 
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr  1 13:45:56 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8190324736 (7810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbae9c000 (69 entries)
bios0: vendor LENOVO version "8BET56WW (1.36 )" date 01/19/2012
bios0: LENOVO 42763JU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.62 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2392622000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
cpu4 at mainbus0: apid 4 (application processor)
cpu4: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 2, package 0
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 2, package 0
cpu6 at mainbus0: apid 6 (application processor)
cpu6: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 3, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.23 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4969" serial   615 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
acpivout at acpivideo1 not configured
cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2401, 2400, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfff80000/0x80000
vendor "NVIDIA", unknown product 0x0dfa (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address f0:de:f1:fd:10:c5
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Conexant/0x2c06, using Conexant CX20590
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 8c:70:5a:88:29:f4
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
"Ricoh 5U832 Firewire" rev 0x04 at pci5 dev 0 function 3 not configured
ppb5 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci6 at ppb5 bus 14
xhci0 at pci6 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9250410AS, D005> SCSI3 0/direct fixed naa.5000c5002f6d8789
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <Optiarc, DVD RW AD-7740H, 1.S0> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (ec92fbff9cb6446a.a) swap on sd0b dump on sd0b
syncing disks... done
rebooting.
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr  1 13:45:56 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8190324736 (7810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbae9c000 (69 entries)
bios0: vendor LENOVO version "8BET56WW (1.36 )" date 01/19/2012
bios0: LENOVO 42763JU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.60 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2392603040 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
cpu4 at mainbus0: apid 4 (application processor)
cpu4: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 2, package 0
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 2, package 0
cpu6 at mainbus0: apid 6 (application processor)
cpu6: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 3, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4969" serial   615 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
acpivout at acpivideo1 not configured
cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2401, 2400, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfff80000/0x80000
vendor "NVIDIA", unknown product 0x0dfa (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address f0:de:f1:fd:10:c5
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Conexant/0x2c06, using Conexant CX20590
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 8c:70:5a:88:29:f4
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
"Ricoh 5U832 Firewire" rev 0x04 at pci5 dev 0 function 3 not configured
ppb5 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci6 at ppb5 bus 14
xhci0 at pci6 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9250410AS, D005> SCSI3 0/direct fixed naa.5000c5002f6d8789
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <Optiarc, DVD RW AD-7740H, 1.S0> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (ec92fbff9cb6446a.a) swap on sd0b dump on sd0b
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Microsoft Microsoft Trackball Optical\M-." rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse2 at ums0 mux 0
umass0 at uhub1 port 4 configuration 1 interface 0 "SanDisk Cruzer" rev 2.00/1.26 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <SanDisk, Cruzer, 1.26> SCSI3 0/direct removable serial.07815530920F4941B5ED
sd1: 3819MB, 512 bytes/sector, 7821312 sectors
sd1 detached
scsibus4 detached
umass0 detached
umass0 at uhub1 port 4 configuration 1 interface 0 "SanDisk Cruzer Glide" rev 2.10/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <SanDisk, Cruzer Glide, 1.00> SCSI4 0/direct removable serial.07815575201219101203
sd1: 30528MB, 512 bytes/sector, 62521344 sectors
sd1 detached
scsibus4 detached
umass0 detached
syncing disks... done
rebooting
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr  1 13:45:56 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8190324736 (7810MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbae9c000 (69 entries)
bios0: vendor LENOVO version "8BET56WW (1.36 )" date 01/19/2012
bios0: LENOVO 42763JU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.59 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2392593200 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
cpu4 at mainbus0: apid 4 (application processor)
cpu4: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 2, package 0
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 2, package 0
cpu6 at mainbus0: apid 6 (application processor)
cpu6: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 3, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz, 2392.24 MHz
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4969" serial   615 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
acpivout at acpivideo1 not configured
cpu0: Enhanced SpeedStep 2392 MHz: speeds: 2401, 2400, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfff80000/0x80000
vendor "NVIDIA", unknown product 0x0dfa (class display subclass VGA, rev 0xa1) at pci1 dev 0 function 0 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address f0:de:f1:fd:10:c5
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Conexant/0x2c06, using Conexant CX20590
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 8c:70:5a:88:29:f4
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
"Ricoh 5U832 Firewire" rev 0x04 at pci5 dev 0 function 3 not configured
ppb5 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci6 at ppb5 bus 14
xhci0 at pci6 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9250410AS, D005> SCSI3 0/direct fixed naa.5000c5002f6d8789
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <Optiarc, DVD RW AD-7740H, 1.S0> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 4
video0 at uvideo0
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Microsoft Microsoft Trackball Optical\M-." rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse2 at ums0 mux 0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (ec92fbff9cb6446a.a) swap on sd0b dump on sd0b
hw.sensors.cpu0.temp0=45.00 degC
hw.sensors.acpitz0.temp0=46.00 degC (zone temperature)
hw.sensors.acpibtn0.indicator0=On (lid open)
hw.sensors.acpibat0.volt0=11.10 VDC (voltage)
hw.sensors.acpibat0.volt1=12.30 VDC (current voltage)
hw.sensors.acpibat0.current0=0.00 A (rate)
hw.sensors.acpibat0.amphour0=8.22 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.41 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.02 Ah (low capacity)
hw.sensors.acpibat0.amphour3=8.05 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=8.66 Ah (design capacity)
hw.sensors.acpibat0.raw0=0 (battery idle), OK
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpithinkpad0.temp0=46.00 degC
hw.sensors.acpithinkpad0.temp1=46.00 degC
hw.sensors.acpithinkpad0.temp2=46.00 degC
hw.sensors.acpithinkpad0.temp3=46.00 degC
hw.sensors.acpithinkpad0.temp4=46.00 degC
hw.sensors.acpithinkpad0.temp5=46.00 degC
hw.sensors.acpithinkpad0.temp6=46.00 degC
hw.sensors.acpithinkpad0.temp7=46.00 degC
hw.sensors.acpithinkpad0.fan0=2518 RPM
hw.sensors.aps0.temp0=43.00 degC
hw.sensors.aps0.temp1=43.00 degC
hw.sensors.aps0.indicator0=Off (Keyboard Active)
hw.sensors.aps0.indicator1=Off (Mouse Active)
hw.sensors.aps0.indicator2=On (Lid Open)
hw.sensors.aps0.raw0=511 (X_ACCEL)
hw.sensors.aps0.raw1=497 (Y_ACCEL)
hw.sensors.aps0.raw2=511 (X_VAR)
hw.sensors.aps0.raw3=497 (Y_VAR)
Reply With Quote
Old 27th October 2017
demifiend's Avatar
demifiend demifiend is offline
Real Name: Matthew Graybosch
Silent Protagonist
 
Join Date: Oct 2017
Location: Harrisburg, PA
Posts: 29
Default dmesg for imaginos (Lenovo Thinkpad T430s)

Here's the dmesg for imaginos, a used Lenovo Thinkpad T430s that I take to work so I can write on my lunch break.

Code:
OpenBSD 6.2 (GENERIC.MP) #134: Tue Oct  3 21:22:29 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3960668160 (3777MB)
avail mem = 3833610240 (3656MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (70 entries)
bios0: vendor LENOVO version "G7ET91WW (2.51 )" date 01/22/2013
bios0: LENOVO 23581B0
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 WPBT
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.55 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2594549360 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP6)
acpiprt7 at acpi0: bus -1 (EXP7)
acpiprt8 at acpi0: bus -1 (EXP8)
acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0071" at acpi0 not configured
"LEN0015" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1037" serial   191 type LION oem "SANYO"
acpiac0 at acpi0: AC unit offline
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 7 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 3c:97:0e:7a:ea:89
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, MIMO 2T2R, MoW, address 84:3a:4b:8e:4f:00
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2Z> SCSI3 0/direct fixed naa.5000cca77fc4c7a0
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD-RAM UJ8C2, SB01> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A FIFO underrun
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.18 addr 3
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (03049d315526383d.a) swap on sd0b dump on sd0b
__________________
OpenBSD 6.2-RELEASE on Thinkpad T430s, ThinkCentre M92P, and Clevo W24AEU
Web | Keybase | Mastodon | GitHub
"What happens in the TARDIS stays in the TARDIS."
Reply With Quote
Old 13th January 2018
Nrrg Nrrg is offline
New User
 
Join Date: Jan 2018
Posts: 2
Default

Hello there, here is from LENOVO ideapad 320, exact model 320-15IKB

OpenBSD 6.2 (GENERIC.MP) #2: Sun Dec 10 21:14:42 CET 2017
root@syspatch-62-amd64.openbsd.org:/...ile/GENERIC.MP
real mem = 8477331456 (8084MB)
avail mem = 8213397504 (7832MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8c002000 (67 entries)
bios0: vendor LENOVO version "4WCN25WW" date 05/23/2017
bios0: LENOVO 80XL
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI UEFI MSDM SSDT ASF! ASPT BOOT DBGP HPET APIC MCFG LPIT WSMT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT SSDT DMAR FPDT BGRT
acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3) RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3) PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz, 2400.00 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCI D,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF, ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,B MI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT ,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2400000000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz, 2400.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCI D,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF, ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,B MI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT ,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz, 2400.00 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCI D,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF, ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,B MI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT ,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz, 2400.00 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCI D,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,X SAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF, ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,B MI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT ,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 1 (RP05)
acpiprt6 at acpi0: bus 2 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: WRST
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpibat0 at acpi0: BAT0 model "L16C2PB2" serial 1723 type LiP oem "CPT-COS"
"VPC2004" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"MSFT0001" at acpi0 not configured
"INT344B" at acpi0 not configured
"ELAN0608" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2400 MHz: speeds: 2401, 2400, 2300, 2100, 2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
error: [drmid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 0 not configured
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST1000LM035-1RK1, LVM2> SCSI3 0/direct fixed naa.5000c500aa04b529
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8AESH, XL6M> ATAPI 5/cdrom removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 54:e1:ad:3e:01:ac
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99, msi
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0230, Intel/0x280b, using Realtek/0x0230
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/30.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/30.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.01 addr 3
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Generic EasyCamera" rev 2.00/53.04 addr 4
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (cbcee9f1b6dda82e.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x210, fw ver 16.242414.0, address
Reply With Quote
Old 31st January 2018
Trihex's Avatar
Trihex Trihex is offline
Real Name: Trihexagonal
Port Guard
 
Join Date: Jul 2017
Location: Over the hills and far away
Posts: 43
Default

My "new" IBM Thinkpad T43 running OpenBSD 6.2:

Code:
$ dmesg
OpenBSD 6.2 (GENERIC) #2: Sun Dec 10 20:46:13 CET 2017
    root@syspatch-62-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF
real mem  = 2145796096 (2046MB)
avail mem = 2090655744 (1993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 08/21/06, BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.33 @ 0xe0          
010 (64 entries)
bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006
bios0: IBM 26686CU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB3(S3) USB7(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus -1 (EXP1)
acpiprt4 at acpi0: bus 3 (EXP2)
acpiprt5 at acpi0: bus -1 (EXP3)
acpiprt6 at acpi0: bus 11 (PCI1)
acpicpu0 at acpi0
C1: unknown FFH class 0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(@1 halt!), PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"IBM0057" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0400" at acpi0 not configured
"IBM0071" at acpi0 not configured
"NSC1100" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "IBM-92P1089" serial  9724 type LION oem "SONY"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000!0xe0000/0x10000 
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1600, 1333, 1066, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 20
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): a          
pic 1 int 16, address 00:16:41:14:df:5b
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: apic 1 int 22
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci4 at ppb3 bus 11
cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: apic 1 int 16
iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: apic 1 int 21, address 00:16:6f:09:63:48
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 22, ICH 6
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo 
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS721010G9AT00>
wd0: 16-sector PIO, LBA, 95396MB, 195371568 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0J05> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int 23 
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9, 0x2c6ab1 0x0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Cruzer" rev 2.00/1.26 adaddr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer, 1.26> SCSI3 0/direct removable serial.07815530920F4941B5ED
sd0: 3819MB, 512 bytes/sector, 7821312 sectors
ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (a37fd24dd7b51000.a) swap on wd0b dump on wd0b
radeondrm0: 1024x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sd0 detached
scsibus2 detached
umass0 detached
dr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer, 1.26> SCSI3 0/direct removable serial.07815530920F4941B5ED          
sd0: 3819MB, 512 bytes/sector, 7821312 sectors
ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (a37fd24dd7b51000.a) swap on wd0b dump on wd0b
radeondrm0: 1024x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sd0 detached
scsibus2 detached
umass0 detached
umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Ultra" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <SanDisk, Ultra, 1.00> SCSI4 0/direct removable seri          
al.07815581561204110284
sd0: 117312MB, 512 bytes/sector, 240254976 sectors
sd0 detached
scsibus2 detached
umass0 detached
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft Microsoft Trackball Optical\M-." rev 1.10/1.21 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse2 at ums0 mux 0
wsmouse2 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Microsoft Microsoft Trackball          
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse2 at ums0 mux 0
umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Cruzer" rev 2.00/1.26           
addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer, 1.26> SCSI3 0/direct removable serial.07815530920F4941B5ED          
sd0: 3819MB, 512 bytes/sector, 7821312 sectors

Last edited by Trihex; 1st February 2018 at 12:42 AM.
Reply With Quote
Old 6th March 2018
LeFrettchen's Avatar
LeFrettchen LeFrettchen is offline
Marveled user
 
Join Date: Aug 2012
Location: France
Posts: 334
Default

HP Pavilion dv6000

Code:
OpenBSD 6.2 (GENERIC.MP) #166: Tue Oct  3 19:58:05 MDT 2017
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2050 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM,PERF,SENSOR
real mem  = 3219079168 (3069MB)
avail mem = 3143299072 (2997MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/26/06, BIOS32 rev. 0 @ 0xfd610, SMBIOS rev. 2.4 @ 0xdf010 (22 entries)
bios0: vendor Hewlett-Packard version "F.06" date 10/26/2006
bios0: Hewlett-Packard HP Pavilion dv6000 (RR370EA#ABF)
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG BOOT APIC SSDT SSDT
acpi0: wakeup devices RP02(S3) PXS3(S4) LANC(S4) PS2K(S3) PS2M(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2050 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,EST,TM2,xTPR,PDCM,PERF,SENSOR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiprt5 at acpi0: bus 7 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(100@57 io@0x1016), !C2(500@1 io@0x1014), C1(1000@1 halt), PSS
acpicpu1 at acpi0: !C3(100@57 io@0x1016), !C2(500@1 io@0x1014), C1(1000@1 halt), PSS
acpitz0 at acpi0: critical temperature is 85 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial   type LION oem "Hewlett-Packard"
acpibtn2 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"HPQ0006" at acpi0 not configured
"*SYN012B" at acpi0 not configured
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 0xdf000/0x800! 0xe0000/0x1800!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7400 Go" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Conexant CX20549
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci2 at ppb1 bus 2
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:18:de:9a:f2:54
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci4 at ppb3 bus 5
em0 at pci4 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address 00:16:36:aa:37:8f
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 7
"Ricoh 5C832 Firewire" rev 0x00 at pci5 dev 5 function 0 not configured
sdhc0 at pci5 dev 5 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: apic 1 int 17
sdhc0: SDHC 1.0, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit
"Ricoh 5C843 MMC" rev 0x01 at pci5 dev 5 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci5 dev 5 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci5 dev 5 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850S, 1.05> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: port 0: 1.5Gb/s
ahci0: PHY offline on port 2
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS54168, SB2O> SCSI3 0/direct fixed naa.5000cca522c3c0ee
sd0: 76319MB, 512 bytes/sector, 156301488 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL6 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3, 0x1a0b1 0x200000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2
video0 at uvideo0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (ab882d10be7c41bc.a) swap on sd0b dump on sd0b
scsibus5 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus5 targ 1 lun 0: <SD/MMC, SD, 0010> SCSI2 0/direct removable
sd1: 1944MB, 512 bytes/sector, 3981312 sectors
pms0: not in sync yet, discard input (state 0)
pms0: not in sync yet, discard input (state 0)
pms0: not in sync yet, discard input (state 0)
pms0: not in sync yet, discard input (state 3)
pms0: not in sync yet, discard input (state 0)
pms0: not in sync yet, discard input (state 0)
pms0: not in sync yet, discard input (state 0)
pms0: not in sync yet, discard input (state 0)
sd1 detached
scsibus5 detached
__________________
The secret of wisdom is not wisdom itself, it's the road that leads us there.
Reply With Quote
Old 12th March 2018
e1-531g e1-531g is offline
VPN Cryptographer
 
Join Date: Mar 2014
Posts: 448
Default

I cleaned internals, replaced CPU and thermal paste in my laptop described in post #98 and #148.
Before: Pentium B960 (Sandy Bridge)
After: i5-3320M (Ivy Bridge).

Works great with patches to disable secondary Nvidia's GPU.
__________________
Signature: Furthermore, I consider that systemd must be destroyed.
Based on Latin oratorical phrase
Reply With Quote
Old 16th April 2018
snowleopard snowleopard is offline
New User
 
Join Date: Apr 2018
Posts: 3
Default

Sorry for wake up topic. I'm running OpenBSD 6.3 on Thinkpad W530. Works perfect but there are some misunderstanding things.
__________________
Thinkpad W530 | i7-3820QM | 32Gb RAM | NVidia Quadro | 256Gb SSD
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Your FreeBSD Laptop vermaden FreeBSD General 67 6th June 2014 12:27 PM
OpenBSD = Awesome Laptop OS revzalot OpenBSD General 8 9th September 2008 07:12 AM
Laptop Repair DrJ General Hardware 4 25th August 2008 02:30 PM
laptop cw_ FreeBSD General 21 14th August 2008 02:48 AM
Dual-boot laptop won't boot OpenBSD after upgrade to 4.3 kbeaucha OpenBSD Installation and Upgrading 17 30th May 2008 02:40 PM


All times are GMT. The time now is 12:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick