![]() |
|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
![]() |
|
Thread Tools | Display Modes |
|
|||
![]()
Hi peeps,
Recently i've noticed a significant slowdown on an old OpenBSD 3.5 box, which we run IPSec/VPN on. System load consistently reached 2.70+, and upon closer investigation it seems the system process hogs up the cpu. We're using some el cheapo NICs on it, so i began to suspect that maybe the box is getting drowned in interrupts...but the systat reports below doesn't suggest that: ************************************************** ************************************************** ** load averages: 2.58, 2.50, 2.27 18:21:36 14 processes: 1 running, 13 idle CPU states: 0.0% user, 0.0% nice, 96.2% system, 0.4% interrupt, 3.3% idle Memory: Real: 4764K/60M act/tot Free: 439M Swap: 0K/4093M used/tot PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND 4930 root 2 0 308K 992K idle select 0:00 0.00% sshd 5549 root 28 0 216K 860K run - 0:00 0.00% top 31061 root 2 0 292K 564K idle select 0:00 0.00% cron 5500 _syslogd 2 0 172K 496K idle poll 0:00 0.00% syslogd 23416 root 2 0 364K 1476K sleep select 0:00 0.00% sshd 1 root 10 0 368K 228K idle wait 0:00 0.00% init 11404 root 18 0 340K 304K idle pause 0:00 0.00% csh 22485 root 2 0 144K 456K idle netio 0:00 0.00% syslogd 31382 root 3 0 92K 476K idle ttyin 0:00 0.00% getty 13179 root 2 0 104K 492K idle select 0:00 0.00% inetd 19389 root 3 0 84K 476K idle ttyin 0:00 0.00% getty 10293 root 3 0 88K 476K idle ttyin 0:00 0.00% getty 19331 root 3 0 56K 476K idle ttyin 0:00 0.00% getty 20411 root 3 0 56K 476K idle ttyin 0:00 0.00% getty ************************************************** ************************ output of systat :io /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average |||||||||||||||||| /0 /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 cpu user| nice| system|XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXX interrupt| idle| /0 /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 wd0 Kps| tps| ************************************************** ************************ output of systat :swap /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average |||||||||||||| Disk 1K-blocks Used /0% /10% /20% /30% /40% /50% /60% /70% /80% /90% /100% swap_ 4191248 0 ************************************************** ************************ output of mbufs: /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average >>>>>>>>>>> /0 /5 /10 /15 /20 /25 /30 /35 /40 /45 /50 /55 /60 sockets XXX data X headers X ************************************************** ************************ output of pigs: /0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10 Load Average <<<<<<<<<<<<<< /0 /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 <idle> XXXXXXXXXXXXX ************************************************** ************************ 1 users Load 2.19 2.72 2.51 Thu Oct 7 18:27:26 2010 memory totals (in KB) PAGING SWAPPING Interrupts real virtual free in out in out 8506 total Active 4948 4948 449388 ops 100 clock All 61624 61624 4640632 pages 4593 rl0 128 rtc Proc:r d s w Csw Trp Sys Int Sof Flt forks 3685 vr0 2 56 7 44 13210 1 10 fkppw pciide1 fksvm 91.3% Sys 0.0% User 0.0% Nice 8.4% Idle pwait | | | | | | | | | | | relck ============================================== rlkok noram Namei Sys-cache Proc-cache No-cache ndcpy Calls hits % hits % miss % fltcp 13 13 100 1 8 -1 -8 1 zfod cow Disks wd0 128 fmin seeks 170 ftarg xfers itarg Kbyte 54 wired sec pdfre Showing vmstat, refresh every 5 seconds. ************************************************** ************************ i'm beginning to suspect that maybe the box can't handle all that VPN/IPSec processing; what else can i check to determine this? And how to do i solve this btw? Currently the box has 512MB RAM and a P4 2.0Ghz processor; i doubt if bumping up the RAM and going dual core is going to solve things... tia |
|
|||
![]()
OpenBSD 3.5 (..not a typo?) was released in 2004, that's 5 years ago.. it's quite unsupported.
I doubt anyone here even remembers it enough to help you, 4.8 is due out next month.. it would be a good idea to look into reinstalling and trying to replicate your configuration. Load averages are calculated differently than Linux or other Unix systems, as is often mentioned on the mailing lists.. these values are not indicative of any problem. Also, when posting program output here.. please use [code][/code] as it preserves formatting. |
|
|||
![]()
oops, sorry about the thing.
In my case, console response became very slow; i can't pinpoint a specific process hogging up the CPU -- it's not even the interrupts. Anyways, maybe i'll just wait for 4.8 to come along and replace it outright. thanks |
|
|||
![]()
so i've set up an OpenBSD4.7 box and swapped it in...system load is still very high, specifically the crypto process is taking up 88-97% cpu while in the "bored" state.
Any suggestions? i'm using a P4 2.66Ghz box. |
|
|||
![]()
would a multicore cpu help in this matter? i think for basic routing stuff multicores is not that big of a help, but IPSec encryption could be a different matter...
|
|
|||
![]() Quote:
What other applications/daemons are running? And posting the output of dmesg(8) would be helpful. |
|
||||
![]() Quote:
http://marc.info/?l=openbsd-misc&m=128691532410484&w=1 |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Build Process Warnings | IronForge | OpenBSD Installation and Upgrading | 9 | 22nd January 2010 11:21 AM |
Loader, MBR and the boot process | Jago | FreeBSD Installation and Upgrading | 1 | 22nd January 2010 04:52 AM |
Any Solution for Xorg high CPU usage in Ubuntu 9.04? | Mantazz | Other BSD and UNIX/UNIX-like | 11 | 14th July 2009 06:10 AM |
See what process is generating DNS traffic? | Bruco | FreeBSD General | 3 | 2nd July 2009 05:57 PM |
shell script-start another process | bsdnewbie999 | Programming | 2 | 23rd April 2009 07:48 PM |