DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 4th June 2017
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Package Pilot
 
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 202
Default Install CD hangs, does not boot

I have a Install CD I made for OpenBsd 6.1 and it worked fine on 2 other computers.
How ever on a 3rd computer, it is not booting completely.
It does start, normal , but when it gets to this point:
Code:
wskbd0 at pckbd0: console keyboard ,wsdisplay0
 npx0 at  isa0 port port 0xf0/16: reported by CPUID: using exception 16
This is where it hangs, and never goes on to load the installer.
Any ideas ?
I don't know of any way to get 'dmesg' or more details, well maybe , I had another
CD that was for NetBsd, and it installed ok, Would the 'dmesg' output from that
be of any use ?
Thanks
__________________
My best friends are parrots
Reply With Quote
  #2   (View Single Post)  
Old 4th June 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,975
Default

No, actually, the NetBSD dmesg won't help very much. At least, not here.

One thing you can try is a "verbose" boot - that produces lots of output, but you will see the last thing the kernel attempted to do (such as probe a specific device or device class).
  1. At the boot> prompt, enter the User Kernel Config tool with the "-c" option.
  2. At the first UKC> prompt, enter "verbose"
  3. At the second UKC> prompt, enter "quit"
Watch for the kernel output to stop... or to loop, and note the last thing it was doing ... or continues to do forever.

See the boot_config(8) and boot(8) man pages.
Reply With Quote
  #3   (View Single Post)  
Old 4th June 2017
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Package Pilot
 
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 202
Default

Thanks,
Interesting ,....

There is a lot of "failed" comments at the end, the very last one says
Code:
>>>probing for pci2 failed
"pci0" and 1 also failed,..
also a "ex0" failed, "ep0 failed",... there is more but I have some chores
I have to do,when I get back I will write it all down.
Thanks
__________________
My best friends are parrots
Reply With Quote
  #4   (View Single Post)  
Old 4th June 2017
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Package Pilot
 
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 202
Default

Quote:
See the boot_config(8) and boot(8) man pages
These both are clear and straight forward enough, thanks.
I was not able to even think of what possible 'man' pages I should look at, so this
is a big help.
How ever the list of
Quote:
such as probe a specific device or device class
the list of devices, is very long, so it is not just 1 specific device.
In a nut shell , it does not look like I will be able to install OpenBsd, on this particular hardware,
it is a pretty old computer , a friend gave it to me.
It may take me a while to try some things based on what the manuals say, but I have my doubts, and since NetBsd sort of "just worked", and is installed , I may just go with that.
Another thought, is to try some older version of OpenBsd, and see if that works better.
Anyway, thanks for pointing me to those 2 manuals and this:
Quote:
At the boot> prompt, enter the User Kernel Config tool with the "-c" option.
These will prove useful for sure, and are new "commands" to me.
Thanks
__________________
My best friends are parrots
Reply With Quote
  #5   (View Single Post)  
Old 8th June 2017
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Package Pilot
 
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 202
Default

I finally was able to install.

I ended up formating the HD as fat32, after that the OpenBsd install CD booted just fine, and installation was successful.
I am using it now , to post this. Thanks,.......
__________________
My best friends are parrots
Reply With Quote
  #6   (View Single Post)  
Old 8th June 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,975
Default

Very odd; bits on your hard drive should not have anything to do with failing hardware probes during boot of the CD.
Reply With Quote
  #7   (View Single Post)  
Old 9th June 2017
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Package Pilot
 
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 202
Default

It is kind of a mystery, I never had any problem on other computers
when booting and installing. All though netbsd was able to boot, and install, it was not easy, and things really were not working well. Besides that, I wanted OpenBsd.
Later I tried some other install CDś, Minx3, and also FreeDos and encountered similar problem. Minix3 booted, but could not read the drive, there for could not install. Then with FreeDos, it did boot, but could also not read the drive, that is when I decided to try formatting, in fact I was considering installing FreeDos.
Any way, once I formatted it, I decided to try one more time, with OpenBsd and to my surprise the install CD booted fine, and I was able to install.
I don't know, -----
Like I said, the computer was given to me, it is old the HD is supposed to be new, he had managed to install windows7 on it, but I did not want that, maybe that had something to do with it ?
I believe the computer would have had windowsXP ,when it was new.
Here is the dmesg output now:
Code:
OpenBSD 6.1 (GENERIC.MP) #291: Sat Apr  1 13:53:41 MDT 2017
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF,SENSOR
real mem  = 1064517632 (1015MB)
avail mem = 1031360512 (983MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 02/18/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0x9f800 (27 entries)
bios0: vendor American Megatrends Inc. version "080012" date 02/18/2008
bios0: PCCHIPS P17G
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) WOL_(S4) UAR1(S4) EUSB(S4) MC97(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpitz0 at acpi0: critical temperature is 60 degC
"PNP0401" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpibtn0 at acpi0: PWRB
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF,SENSOR
mpbios0: bus 0 is type PCI   
mpbios0: bus 1 is type PCI   
mpbios0: bus 2 is type ISA   
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
bios0: ROM list: 0xc0000/0xae00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 2 int 16
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Sigmatel STAC9221D
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci1 at ppb0 bus 1
rl0 at pci1 dev 5 function 0 "Realtek 8139" rev 0x10: apic 2 int 20, address 00:1e:90:d8:1c:4c
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD5000AAKS-00V1A0>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide1 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S223C, SB02> ATAPI 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 2, EC port 0xa10
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
urndis0 at uhub0 port 7 configuration 1 interface 0 "BLU BLU DASH5.0+" rev 2.00/2.16 addr 2
urndis0: using RNDIS, address 2e:2b:49:a0:7b:0b
umass0 at uhub0 port 8 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI2 0/direct removable serial.09306545EF105A357D6E
sd0: 14891MB, 512 bytes/sector, 30497664 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB Keyboard" rev 1.10/64.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB Keyboard" rev 1.10/64.00 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 1 configuration 1 interface 0 "Genius USB Optical Mouse" rev 2.00/1.00 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (28d03527b9685d9a.a) swap on wd0b dump on wd0b
wsmouse0 detached
ums0 detached
uhidev2 detached
syncing disks... done
rebooting...
OpenBSD 6.1 (GENERIC.MP) #291: Sat Apr  1 13:53:41 MDT 2017
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF,SENSOR
real mem  = 1064517632 (1015MB)
avail mem = 1031360512 (983MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 02/18/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0x9f800 (27 entries)
bios0: vendor American Megatrends Inc. version "080012" date 02/18/2008
bios0: PCCHIPS P17G
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) WOL_(S4) UAR1(S4) EUSB(S4) MC97(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpitz0 at acpi0: critical temperature is 60 degC
"PNP0401" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpibtn0 at acpi0: PWRB
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF,SENSOR
mpbios0: bus 0 is type PCI   
mpbios0: bus 1 is type PCI   
mpbios0: bus 2 is type ISA   
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
bios0: ROM list: 0xc0000/0xae00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 2 int 16
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Sigmatel STAC9221D
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci1 at ppb0 bus 1
rl0 at pci1 dev 5 function 0 "Realtek 8139" rev 0x10: apic 2 int 20, address 00:1e:90:d8:1c:4c
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD5000AAKS-00V1A0>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide1 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S223C, SB02> ATAPI 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 2, EC port 0xa10
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
urndis0 at uhub0 port 7 configuration 1 interface 0 "BLU BLU DASH5.0+" rev 2.00/2.16 addr 2
urndis0: using RNDIS, address 2e:2b:49:a0:7b:0b
umass0 at uhub0 port 8 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI2 0/direct removable serial.09306545EF105A357D6E
sd0: 14891MB, 512 bytes/sector, 30497664 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB Keyboard" rev 1.10/64.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB Keyboard" rev 1.10/64.00 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 1 configuration 1 interface 0 "Genius USB Optical Mouse" rev 2.00/1.00 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (28d03527b9685d9a.a) swap on wd0b dump on wd0b
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0: urndis_decap invalid buffer len 1 < minimum header 44
urndis0 detached
ugen0 at uhub0 port 7 "BLU BLU DASH5.0+" rev 2.00/2.16 addr 2
ugen0 detached
urndis0 at uhub0 port 7 configuration 1 interface 0 "BLU BLU DASH5.0+" rev 2.00/2.16 addr 2
urndis0: using RNDIS, address 22:2a:cc:e3:45:4c
urndis0: ctrl message error: unknown event 0x7
__________________
My best friends are parrots
Reply With Quote
  #8   (View Single Post)  
Old 9th June 2017
jggimi's Avatar
jggimi jggimi is online now
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,975
Default

There have been some issues with EFI-booting systems which are expecting Secure Boot keys. But that is not what you apparently experienced here.

When you were having problems, the kernel was successfully booted. But it failed to probe a PCI bus successfully. That indicates a hardware problem of some kind.

Odds are low that the reformat was responsible for the correction.
Reply With Quote
  #9   (View Single Post)  
Old 9th June 2017
GarryR's Avatar
GarryR GarryR is offline
Real Name: Garry Ricketson
Package Pilot
 
Join Date: Jul 2015
Location: Durango, Mx.
Posts: 202
Default

Well, maybe it was just a coincidence then, any way, it seems to keep working ok now.
That is the important thing.

Thanks
Reply With Quote
Old 19th June 2017
hermano hermano is offline
New User
 
Join Date: Mar 2017
Posts: 7
Default

...more likely you banged the desk in frustration, shook up the hardware and now it works!

So, consider opening the machine up, vacuuming the dust bunnies and reseating all the PCI cards properly.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
5.8 install hangs Blinker OpenBSD Installation and Upgrading 3 28th October 2015 10:08 PM
5.0 Installation work, but hangs on boot Sabbel OpenBSD Installation and Upgrading 10 3rd April 2012 11:21 AM
OpenBSD 4.6 i386 boot hangs with old gateway system - resolved comet--berkeley OpenBSD Installation and Upgrading 6 22nd July 2011 08:15 AM
openbsd hangs momentarily at boot bogd OpenBSD General 11 9th January 2009 02:53 PM
FreeBSD hangs on boot Bubba_HoTep FreeBSD General 3 29th November 2008 10:25 PM


All times are GMT. The time now is 05:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick