|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
wlan firmware cant be install
Hello :-)
i have now installed OpenBSD 6.2 AMD64 on my Thinkpad T60p. At the end of the installation it told me i have to install wpi-firmware i installed it from here http://firmware.openbsd.org/firmware/6.2/ with wget firmware.openbsd.org/firmware/6.2/wpi-firmware-3.2p1.tgz i did this also with wget firmware.openbsd.org/firmware/6.2/radeondrm-firmware-20150927.tgz but when i try then pkg_add wpi-firmware-3.2p1.tgz what is wrong? |
|
|||
here my ifconfig
Code:
$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768 index 4 priority 0 llprio 3 groups: lo inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:15:58:7d:46:56 index 1 priority 0 llprio 3 groups: egress media: Ethernet autoselect (100baseTX full-duplex) status: active inet 192.168.88.242 netmask 0xffffff00 broadcast 192.168.88.255 wpi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:19:d2:b1:f7:9f index 2 priority 4 llprio 3 groups: wlan media: IEEE802.11 autoselect status: no network ieee80211: nwid "" enc0: flags=0<> index 3 priority 0 llprio 3 groups: enc status: active pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136 index 5 priority 0 llprio 3 groups: pflog $ |
|
|||
here my dmesg
Code:
OpenBSD 6.2 (GENERIC.MP) #134: Tue Oct 3 21:22:29 MDT 2017 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2129461248 (2030MB) avail mem = 2057961472 (1962MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries) bios0: vendor LENOVO version "79ETE1WW (2.21 )" date 02/05/2008 bios0: LENOVO 2008cto acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.27 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LONG,LAHF,PERF,SENSOR cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 166MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1994.99 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LONG,LAHF,PERF,SENSOR cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins , remapped to apid 1 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus 4 (EXP2) acpiprt5 at acpi0: bus 12 (EXP3) acpiprt6 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7 acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "IBM0057" at acpi0 not configured "IBM0071" at acpi0 not configured tpm0 at acpi0: TPM_ addr 0xfed40000/0x1000: Atmel 97SC3203 rev 0x5 acpibat0 at acpi0: BAT0 model "42T4621" serial 37396 type LION oem "SANYO" acpiac0 at acpi0: AC unit offline acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) acpivideo0 at acpi0: VID_ acpivout0 at acpivideo0: LCD0 acpivideo1 at acpi0: VID_ acpivout at acpivideo1 not configured cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: msi pci1 at ppb0 bus 1 radeondrm0 at pci1 dev 0 function 0 "ATI Mobility FireGL V5250" rev 0x00 drm0 at radeondrm0 radeondrm0: msi azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices AD1981HD audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address 00:15:58:7d:46:56 ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi pci3 at ppb2 bus 3 wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:b1:f7:9f ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi pci5 at ppb4 bus 12 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci6 at ppb5 bus 21 cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.08> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1 ahci0: port 0: 1.5Gb/s scsibus2 at ahci0: 32 targets sd0 at scsibus2 targ 0 lun 0: <ATA, C300-CTFDDAC128M, 0007> SCSI3 0/direct fixed naa.500a075103018ef9 sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.2, 0x81a0b1 0x300000 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 vmm0 at mainbus0: VMX uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhidev1 at uhub1 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2 uhidev1: iclass 3/1, 28 report ids uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 uhid1 at uhidev1 reportid 22: input=4, output=0, feature=0 uhid2 at uhidev1 reportid 23: input=0, output=0, feature=1 ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhid3 at uhidev1 reportid 28: input=3, output=0, feature=0 uhidev2 at uhub1 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2 uhidev2: iclass 3/0, 8 report ids uhid4 at uhidev2 reportid 3: input=1, output=0, feature=0 uhid5 at uhidev2 reportid 4: input=1, output=0, feature=0 uhid6 at uhidev2 reportid 7: input=7, output=0, feature=0 uhid7 at uhidev2 reportid 8: input=1, output=0, feature=0 ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (4a6d64e250c4cac3.a) swap on sd0b dump on sd0b error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r520_cp" error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware! drm:pid0:r520_startup *ERROR* failed initializing CP (-2). drm:pid0:r520_init *ERROR* Disabling GPU acceleration drm:pid0:radeon_bo_unpin *WARNING* 0xffff8000001b2390 unpin not necessary radeondrm0: 1400x1050, 32bpp wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) wskbd1: disconnecting from wsdisplay0 wskbd1 detached ukbd0 detached uhidev0 detached uhid0 detached uhid1 detached uhid2 detached wsmouse2 detached ums0 detached uhid3 detached uhidev1 detached uhid4 detached uhid5 detached uhid6 detached uhid7 detached uhidev2 detached uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microsoft Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 2 configuration 1 interface 1 "Microsoft Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2 uhidev1: iclass 3/1, 28 report ids uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 uhid1 at uhidev1 reportid 22: input=4, output=0, feature=0 uhid2 at uhidev1 reportid 23: input=0, output=0, feature=1 ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhid3 at uhidev1 reportid 28: input=3, output=0, feature=0 uhidev2 at uhub1 port 2 configuration 1 interface 2 "Microsoft Microsoft\M-. Nano Transceiver v2.0" rev 2.00/6.34 addr 2 uhidev2: no report descriptor wskbd1: disconnecting from wsdisplay0 wskbd1 detached ukbd0 detached uhidev0 detached uhid0 detached uhid1 detached uhid2 detached wsmouse2 detached ums0 detached uhid3 detached uhidev1 detached uhidev2 detached uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/5.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 16 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhidev1 at uhub1 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/5.00 addr 2 uhidev1: iclass 3/0, 17 report ids uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 wsmouse2 detached ums0 detached uhidev0 detached uhid0 detached uhid1 detached uhid2 detached uhidev1 detached uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/54.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 8 buttons, Z and W dir wsmouse2 at ums0 mux 0 |
|
|||
a cool
so wlan firmware is installed? what about radeon firmware? i try start x and it works i installed now chrome and all works fine :-) i tried netsurf but i cant copy and paste or the code button works not :-( so what do i have to do to activate wlan permanently? i have a hostname.em0 in /etc and inside it is only dhcp written |
|
||||
If you're connected via a wired ethernet, just run fw_update(1)
Your em0 device node is for an ethernet device using the em(4) driver. Just dhcp on a single line is acceptable configuration if you just want to device to connect to a LAN and obtain a DHCP lease. To configure wifi you'll need to configure an /etc/hostname.wpi0 You'll need to configure that appropriately to connect to the wireless access point(s). https://man.openbsd.org/wpi https://www.openbsd.org/faq/faq6.html#Wireless |
|
|||
:-))
so Wlan works now i add this /etc/hostname.wpi0 with my password andd SSID cool :-) and fw_update installed both files automaticly cool :-) big thanks to all i set up also in /etc mixerctl for the volume Code:
outputs.master=255,255 outputs.master.mute=off outputs.headphones=160,160 outputs.headphones.mute=off the beep is so loud :-( |
|
|||
Hello
yes i did the second one i make with nano in /etc/wsconsctl.conf this file and put this in keyboard.bell.volume=0 and it works great :-) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issue with wpi firmware | jenright | OpenBSD Packages and Ports | 10 | 5th February 2015 11:48 PM |
dhcpd, vista and wlan | hamba | FreeBSD Ports and Packages | 5 | 8th September 2009 04:34 PM |
Dell 1395 WLAN Drivers | yanjchan | FreeBSD General | 2 | 30th August 2009 09:28 AM |
WLAN | giga | FreeBSD General | 2 | 5th February 2009 03:53 PM |
wlan -> monitor mode | ccc | FreeBSD Security | 2 | 4th November 2008 09:19 PM |