DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 27th August 2009
IronForge IronForge is offline
Fdisk Soldier
 
Join Date: Jul 2009
Location: SoCal - "have skills, will travel for projects"
Posts: 55
Default OpenBSD release to -current: Xenocara question

Greetings:

I decided to try out the 4.5 -current and reinstalled from scratch.

I was able to checkout the current tree; but I think I confused the Upgrade Process. I was under the impression from the chart of the FAQ Section 5.3.2, we "check out/fetch" the current and build from it.

I was able to checkout/update (since I just reinstalled release) src and ports; but since Xenocara wasn't built, I had errors from cvs.

I presumed that it may be prudent to try to "build" Xenocara before I tried to rebuild the Kernel and Userland per 5.3.1:

Quote:
5.3.1 - Overview of the building process
Building OpenBSD from source involves a number of steps:

* Upgrading to the closest available binary.
* Fetching the appropriate source code.
* Building the new kernel and booting from it.
* Building "userland" ("make build").

There are a couple additional steps that some users may wish to perform, depending on the purpose of the build and if X is installed:

* Building a "release".
* Building X
I ended up getting an error during the Xenocara build:
Code:

===> lib/libdrm/intel
mkdep -a -I/usr/xenocara/lib/libdrm/intel -I/usr/xenocara/lib/libdrm/intel/.. -I/usr/X11R6/include -I/usr/include/dev/pci/drm /usr/xenocara/lib/libdrm/intel/intel_bufmgr.c /usr/xenocara/lib/libdrm/intel/intel_bufmgr_fake.c /usr/xenocara/lib/libdrm/intel/intel_bufmgr_gem.c /usr/xenocara/lib/libdrm/intel/mm.c
cd /usr/xenocara/lib/libdrm && exec make  all
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c /usr/xenocara/lib/libdrm/xf86drm.c -o xf86drm.o
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c /usr/xenocara/lib/libdrm/xf86drmHash.c -o xf86drmHash.o
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c /usr/xenocara/lib/libdrm/xf86drmMode.c -o xf86drmMode.o
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c /usr/xenocara/lib/libdrm/xf86drmRandom.c -o xf86drmRandom.o
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c /usr/xenocara/lib/libdrm/xf86drmSL.c -o xf86drmSL.o
building standard drm library
ranlib libdrm.a
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c -fpic -DPIC /usr/xenocara/lib/libdrm/xf86drm.c -o xf86drm.so
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c -fpic -DPIC /usr/xenocara/lib/libdrm/xf86drmHash.c -o xf86drmHash.so
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c -fpic -DPIC /usr/xenocara/lib/libdrm/xf86drmMode.c -o xf86drmMode.so
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c -fpic -DPIC /usr/xenocara/lib/libdrm/xf86drmRandom.c -o xf86drmRandom.so
cc -O2 -pipe     -I/usr/xenocara/lib/libdrm  -I/usr/X11R6/include  -I/usr/include/dev/pci/drm  -DX_PRIVSEP -c -fpic -DPIC /usr/xenocara/lib/libdrm/xf86drmSL.c -o xf86drmSL.so
building shared object drm library
ranlib libdrm_pic.a
building shared drm library (version 2.4)
cc -shared -fpic  -o libdrm.so.2.4  `lorder xf86drm.so xf86drmHash.so xf86drmMode.so xf86drmRandom.so xf86drmSL.so|tsort -q` 
===> lib/libdrm/intel
cc -O2 -pipe -g    -I/usr/xenocara/lib/libdrm/intel			 -I/usr/xenocara/lib/libdrm/intel/.. -I/usr/X11R6/include		 -I/usr/include/dev/pci/drm -c /usr/xenocara/lib/libdrm/intel/intel_bufmgr.c -o intel_bufmgr.o
cc -O2 -pipe -g    -I/usr/xenocara/lib/libdrm/intel			 -I/usr/xenocara/lib/libdrm/intel/.. -I/usr/X11R6/include		 -I/usr/include/dev/pci/drm -c /usr/xenocara/lib/libdrm/intel/intel_bufmgr_fake.c -o intel_bufmgr_fake.o
cc -O2 -pipe -g    -I/usr/xenocara/lib/libdrm/intel			 -I/usr/xenocara/lib/libdrm/intel/.. -I/usr/X11R6/include		 -I/usr/include/dev/pci/drm -c /usr/xenocara/lib/libdrm/intel/intel_bufmgr_gem.c -o intel_bufmgr_gem.o
/usr/xenocara/lib/libdrm/intel/intel_bufmgr_gem.c: In function `drm_intel_bufmgr_gem_init':
/usr/xenocara/lib/libdrm/intel/intel_bufmgr_gem.c:1288: error: `I915_PARAM_NUM_FENCES_AVAIL' undeclared (first use in this function)
/usr/xenocara/lib/libdrm/intel/intel_bufmgr_gem.c:1288: error: (Each undeclared identifier is reported only once
/usr/xenocara/lib/libdrm/intel/intel_bufmgr_gem.c:1288: error: for each function it appears in.)
*** Error code 1

Stop in /usr/xenocara/lib/libdrm/intel (line 92 of /usr/share/mk/sys.mk).
*** Error code 1

Stop in /usr/xenocara/lib/libdrm (line 48 of /usr/share/mk/bsd.subdir.mk).
*** Error code 1

Stop in /usr/xenocara/lib/libdrm (line 203 of /usr/X11R6/share/mk/bsd.xorg.mk).
*** Error code 1

Stop in /usr/xenocara/lib (line 48 of /usr/share/mk/bsd.subdir.mk).
*** Error code 1

Stop in /usr/xenocara (line 48 of /usr/share/mk/bsd.subdir.mk).
# 
I'm on an AMD Processor Box...Is that causing the build to fail?

I've read in other threads about Binary Upgrades and snapshot fetches; but Xenocara looks like it needs to be built from scratch.

I've obviously overlooked and "read too much into" the FAQ/Manuals. May I have some clarification on this witha few <SPOONFED> instructions if needed for the following questions:

a) Would the Upgrade Option from the install CD allow me to follow -current (kernel, src, ports) AND create the Xenocara "Port Directory"?

b) Should I have (re)built the system in the sequence listed in 5.3.2; and was my Xenocara build-error based on not having my kernel rebuilt after fetching the -current src/port directories?

c) May I have the "step by step" terminal instructions on the binary snapshot upgrade procedures that doesn't involve the install CD; and would that create the Xenocara Ports Directory?

Thanks.

Last edited by vermaden; 27th August 2009 at 07:13 AM. Reason: Use [ code ] tag instead of [ i ].
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Another ACPI question, 7.2-release Mantazz FreeBSD Ports and Packages 1 20th September 2009 11:11 PM
Enlightenment e17 on OpenBSD (Question about current ports) uptonm OpenBSD Packages and Ports 2 17th June 2009 09:12 PM
/usr is full (OpenBSD 4.5 current) valorisa OpenBSD Packages and Ports 7 10th June 2009 01:28 PM
How can i use atheros AR5213 in the openbsd 4.3-release? johnzlly OpenBSD General 13 22nd September 2008 03:59 PM


All times are GMT. The time now is 10:20 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick