DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD Ports and Packages

FreeBSD Ports and Packages Installation and upgrading of ports and packages on FreeBSD.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 29th April 2013
bsdnotbdsm bsdnotbdsm is offline
Port Guard
 
Join Date: Jan 2013
Posts: 30
Default Fail to upgrade opencv on FreeBSD 8.3-RELEASE

Hello,
My system details:
Code:
[root@fbsd8-laptop ~]# uname -a
FreeBSD fbsd8-laptop 8.3-RELEASE-p3 FreeBSD 8.3-RELEASE-p3 #0: Tue Jun 12 00:39:29 UTC 2012     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64
[root@fbsd8-laptop ~]# which gcc
/usr/bin/gcc
[root@fbsd8-laptop ~]# which ld
/usr/bin/ld
[root@fbsd8-laptop ~]# gcc --version
gcc (GCC) 4.2.2 20070831 prerelease [FreeBSD]
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[root@fbsd8-laptop ~]# ld --version
GNU ld version 2.15 [FreeBSD] 2004-05-23
Copyright 2002 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License.  This program has absolutely no warranty.

When I try to upgrade opencv (either using portmaster or cd /path/to/port && make build && make install), I get this error:

Code:
Scanning dependencies of target opencv_test_highgui
[ 28%] Building CXX object modules/highgui/CMakeFiles/opencv_test_highgui.dir/test/test_main.o
[ 29%] Building CXX object modules/highgui/CMakeFiles/opencv_test_highgui.dir/test/test_video_io.o
/usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1/modules/highgui/test/test_video_io.cpp: In member function 'void CV_HighGuiTest::VideoTest(const string&, int)':
/usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1/modules/highgui/test/test_video_io.cpp:173:9: warning: variable 'counter' set but not used [-Wunused-but-set-variable]
[ 29%] Building CXX object modules/highgui/CMakeFiles/opencv_test_highgui.dir/test/test_gui.o
[ 29%] Building CXX object modules/highgui/CMakeFiles/opencv_test_highgui.dir/test/test_precomp.o
[ 29%] Building CXX object modules/highgui/CMakeFiles/opencv_test_highgui.dir/test/test_drawing.o
[ 30%] Building CXX object modules/highgui/CMakeFiles/opencv_test_highgui.dir/test/test_ffmpeg.o
/usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1/modules/highgui/test/test_ffmpeg.cpp: In member function 'virtual void CV_FFmpegWriteSequenceImageTest::run(int)':
/usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1/modules/highgui/test/test_ffmpeg.cpp:125:10: warning: variable 'frame_s' set but not used [-Wunused-but-set-variable]
Linking CXX executable ../../bin/opencv_test_highgui
/usr/local/bin/ld: CMakeFiles/opencv_test_highgui.dir/test/test_drawing.o: undefined reference to symbol 'cv::rectangle(cv::Mat&, cv::Point_<int>, cv::Point_<int>, cv::Scalar_<double> const&, int, int, int)'
/usr/local/bin/ld: note: 'cv::rectangle(cv::Mat&, cv::Point_<int>, cv::Point_<int>, cv::Scalar_<double> const&, int, int, int)' is defined in DSO /usr/local/lib/libopencv_core.so.2 so try adding it to the linker command line
/usr/local/lib/libopencv_core.so.2: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
*** Error code 1

Stop in /usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1.
*** Error code 1

Stop in /usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1.
*** Error code 1

Stop in /usr/local/portswrkdir/usr/ports/graphics/opencv/work/OpenCV-2.3.1.
*** Error code 1

Stop in /usr/ports/graphics/opencv.
*** Error code 1

Stop in /usr/ports/graphics/opencv.

I read several posts which recommended to re-build opencv-core port, I get this when I try to do it:
Code:
[root@fbsd8-laptop /usr/ports/graphics/opencv-core]# make clean
===>  Cleaning for opencv-core-2.3.1_7
[root@fbsd8-laptop /usr/ports/graphics/opencv-core]# make build
===> No options to configure
===>  License BSD accepted by the user
===> Fetching all distfiles required by opencv-core-2.3.1_7 for building
===>  Extracting for opencv-core-2.3.1_7
=> SHA256 Checksum OK for OpenCV-2.3.1a.tar.bz2.
===>  Patching for opencv-core-2.3.1_7
===>  Applying extra patch /usr/ports/graphics/opencv-core/../opencv/files/extra-patch-opencv-core
===>  Applying FreeBSD patches for opencv-core-2.3.1_7
===>   opencv-core-2.3.1_7 depends on file: /usr/local/bin/cmake - found
===>   opencv-core-2.3.1_7 depends on executable: pkgconf - found
===>  Configuring for opencv-core-2.3.1_7
===>  Performing in-source build
/bin/mkdir -p /usr/local/portswrkdir/usr/ports/graphics/opencv-core/work/OpenCV-2.3.1
/libexec/ld-elf.so.1: /usr/lib/libstdc++.so.6: version GLIBCXX_3.4.11 required by /usr/local/bin/cmake not found
*** Error code 1

Stop in /usr/ports/graphics/opencv-core.
*** Error code 1

Stop in /usr/ports/graphics/opencv-core.

IMPORTANT NOTE: I also have gcc4.6 installed from ports:
Code:
[root@fbsd8-laptop /usr/ports/graphics/opencv-core]# /usr/local/bin/gcc46 --version
gcc46 (FreeBSD Ports Collection) 4.6.3
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
With gcc46 in place (after I apply http://www.freebsd.org/doc/en/articl...c/article.html), the opencv-core builds OK, but opencv fails to build, with the same error as the one posted here (using gcc 4.2.2).

Currently I'm using gcc 4.2.2.

I can't find recent information in UPDATING file:
Code:
[root@fbsd8-laptop ~]# cat /usr/ports/UPDATING |grep -i -B 1 opencv |head -5
20110822:
  AFFECTS: users of graphics/opencv
--

  OpenCV python module was moved to own port: graphics/py-opencv
This build error annoys me for several days, I updated ports tree at least three times since problem started, last time I updated it about 3 hours ago. Nothing changes as far as opencv is concerned.

Does anyone have similar problems building opencv / opencv-core 2.3.1_7 ?

Any advice on solving this problem is more than welcomed.
Thank you in advance.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
After upgrade FreeBSD to 8.2-RC2 krasi_e_d FreeBSD Installation and Upgrading 2 7th February 2011 07:10 PM
FreeBSD Release Cycle for FreeBSD 8.1-RELEASE J65nko News 1 17th May 2010 05:53 PM
Best way to upgrade from -release to snapshot Carpetsmoker OpenBSD General 5 26th July 2009 08:51 PM
Upgrade to 7.1-RELEASE fails drl FreeBSD Installation and Upgrading 4 27th March 2009 09:39 PM
FreeBSD 6.2-RELEASE > 7.0-RELEASE Upgrade Marci FreeBSD Installation and Upgrading 2 23rd July 2008 02:10 PM


All times are GMT. The time now is 08:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick