![]() |
|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
![]() |
|
Thread Tools | Display Modes |
|
|
|||
![]()
I finally decided to upgrade, and unfortunately I have a big problem with xorg, actually with the ati driver.
Until version 4.3 there was a "iBooksHacks" option that worked pretty well. Now it has been changed into "MacModel". I've tried all the models written in the man page with no success. The problem is: I can get into X, but then I cannot go back to console, the computer would freeze, the monitor would display "input not supported" and I can't even get in from a different machine, I can only cut the power. I'v tried also without the "MacModel' option, and I can still get into X but no way back. If anyone has any idea to solve the problem it would be great, otherwise I guess I''l be obliged to switch back to 4.3. tks |
|
|||
![]()
Perhaps you can try generating a new configuration file.. i.e: X -configure.
Can you post a dmesg in [code][/code] blocks, and perhaps post /var/log/Xorg.0.log. |
|
|||
![]()
I did a new X -configure from the very beginning.
dmesg: Code:
[ using 408000 bytes of bsd ELF symbol table ] console out [ATY,RockHopper2_A]console in [keyboard] , using USB using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.4 (GENERIC) #1854: Mon Aug 11 13:32:35 MDT 2008 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1033216000 (985MB) mainbus0 at root: model PowerMac10,1 cpu0 at mainbus0: 7447A (Revision 0x102): 1249 MHz: 512KB L2 cache mem0 at mainbus0 spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0 memc0 at mainbus0: uni-n "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5 pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 little endian macgpio0 at macobio0 offset 0x50 "modem-reset" at macgpio0 offset 0x1d not configured "modem-power" at macgpio0 offset 0x1c not configured macgpio1 at macgpio0 offset 0x9 irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 aoa0 at macobio0 offset 0x10000: irq 30,1,2 audio0 at aoa0 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets apm0 at adb0: battery flags 0x0, 0% charged piic0 at adb0 iic1 at piic0 maxtmp0 at iic1 addr 0xc8: max6642 kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0, version 1.0, legacy support ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci3: USB revision 1.0 uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb5 at ohci4: USB revision 1.0 uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6 pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <ST940110A> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors atapiscsi0 at wdc1 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> ATAPI 5/cdrom removable wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:5e:38:10 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 uhub6 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/5.07 addr 2 ulpt0 at uhub6 port 1 configuration 1 interface 0 "Canon S200SP" rev 1.10/1.03 addr 3 ulpt0: using bi-directional mode uhub7 at uhub6 port 3 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/4.10 addr 4 uhidev0 at uhub7 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhidev1 at uhub7 port 3 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub7 port 3 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6 uhidev2: iclass 3/0, 3 report ids uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 softraid0 at root bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted ulpt0 detached wsmouse0 detached ums0 detached uhidev0 detached ukbd0: was console keyboard wskbd0 detached ukbd0 detached uhidev1 detached uhid0 detached uhid1 detached uhidev2 detached uhub7 detached uhub6 detached uhub6 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/5.07 addr 2 ulpt0 at uhub6 port 1 configuration 1 interface 0 "Canon S200SP" rev 1.10/1.03 addr 3 ulpt0: using bi-directional mode uhub7 at uhub6 port 3 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/4.10 addr 4 uhidev0 at uhub7 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 5 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhidev1 at uhub7 port 3 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub7 port 3 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/4.10 addr 6 uhidev2: iclass 3/0, 3 report ids uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 Code:
(WW) OS did not count PCI devices, guessing wildly (--) Using wscons driver X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: OpenBSD 4.4 macppc Current Operating System: OpenBSD mini.my.domain 4.4 GENERIC#1854 macppc Build Date: 06 August 2008 02:29:41PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 1 08:25:36 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (==) Including the default font path /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/. (**) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ (**) RgbPath set to "/usr/X11R6/share/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (II) Loader magic: 0x19c7248 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on openbsd (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:0b:0: chip 106b,0034 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 1002,5962 card 1002,5962 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:11:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(0:16:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0x98000000/27, 0x90000000/16, I/O @ 0x0400/8, BIOS @ 0x90020000/17 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [1] -1 0 0x90000000 - 0x9000ffff (0x10000) MX[B](B) [2] -1 0 0x98000000 - 0x9fffffff (0x8000000) MX[B](B) [3] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [1] -1 0 0x90000000 - 0x9000ffff (0x10000) MX[B](B) [2] -1 0 0x98000000 - 0x9fffffff (0x8000000) MX[B](B) [3] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [5] -1 0 0x90000000 - 0x9000ffff (0x10000) MX[B](B) [6] -1 0 0x98000000 - 0x9fffffff (0x8000000) MX[B](B) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [9] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "type1" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded by default. (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "xtrap" (II) Loading /usr/X11R6/lib/modules/extensions//libxtrap.so (II) Module xtrap: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DEC-XTRAP (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts//libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "dri" (WW) Warning, couldn't open module dri (II) UnloadModule: "dri" (EE) Failed to load module "dri" (module does not exist, 0) (II) LoadModule: "radeon" (II) Loading /usr/X11R6/lib/modules/drivers//radeon_drv.so (II) Module radeon: vendor="X.Org Foundation" compiled for 1.4.2, module version = 4.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI Radeon Mobility X300 (M24) 3152 (PCIE), ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE), ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP), ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), ATI Radeon Mobility 9800 (M18) JN (AGP), ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP), ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), ATI Radeon Mobility X300 (M22) 5460 (PCIE), ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), ATI Radeon X800PRO (R423) UI (PCIE), ATI Radeon X800LE (R423) UJ (PCIE), ATI Radeon X800SE (R423) UK (PCIE), ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), ATI FireGL unknown (R423) UR (PCIE), ATI FireGL unknown (R423) UT (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility Radeon X700 XL (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon XPRESS 200 5954 (PCIE), ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), ATI Radeon XPRESS 200M 5975 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE), ATI Radeon XPRESS 200M 5A42 (PCIE), ATI Radeon XPRESS 200 5A61 (PCIE), ATI Radeon XPRESS 200M 5A62 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE), ATI Radeon X600 (RV370) 5B62 (PCIE), ATI Radeon X550 (RV370) 5B63 (PCIE), ATI FireGL V3100 (RV370) 5B64 (PCIE), ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Mobility Radeon X800 XT (M28) (PCIE), ATI Mobility FireGL V5100 (M28) (PCIE), ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), ATI Radeon X850 XT PE (R480) (PCIE), ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), ATI Radeon X850 XT (R480) (PCIE), ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 PRO (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Mobility Radeon X1700, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950, ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400, ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260, ATI ATI Radeon HD 3600 Series, ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO, ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics (II) Primary Device is: PCI 00:10:0 (--) Chipset ATI Radeon 9200 5962 (AGP) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [5] -1 0 0x90000000 - 0x9000ffff (0x10000) MX[B](B) [6] -1 0 0x98000000 - 0x9fffffff (0x8000000) MX[B](B) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [9] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [5] -1 0 0x90000000 - 0x9000ffff (0x10000) MX[B](B) [6] -1 0 0x98000000 - 0x9fffffff (0x8000000) MX[B](B) [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) [13] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [14] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) RADEON(0): MMIO registers at 0x0000000090000000: size 64KB (II) RADEON(0): PCI bus 0 card 16 func 0 (**) RADEON(0): Depth 24, (--) framebuffer bpp 32 (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) RADEON(0): Default visual is TrueColor (**) RADEON(0): Option "MacModel" "mini" (II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped (==) RADEON(0): RGB weight 888 (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) (--) RADEON(0): Chipset: "ATI Radeon 9200 5962 (AGP)" (ChipID = 0x5962) (--) RADEON(0): Linear framebuffer at 0x0000000098000000 (--) RADEON(0): BIOS at 0x90020000 (WW) RADEON(0): Video BIOS not detected in PCI space! (WW) RADEON(0): Attempting to read Video BIOS from legacy ISA space! (WW) No VGA Base=0xc0000 (II) RADEON(0): Attempting to read un-POSTed bios (WW) RADEON(0): Video BIOS not detected in PCI space! (WW) RADEON(0): Attempting to read Video BIOS from legacy ISA space! (WW) No VGA Base=0xc0000 (WW) RADEON(0): Unrecognized BIOS signature, BIOS data will not be used (II) RADEON(0): Generation 2 PCI interface, using max accessible memory (II) RADEON(0): Detected total video RAM=32768K, accessible=131072K (PCI BAR=131072K) (--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM) (II) RADEON(0): Color tiling enabled by default (II) RADEON(0): Max desktop size set to 2048x1200 (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (WW) RADEON(0): Video BIOS not detected, using default clock settings! (II) RADEON(0): Probed PLL values: xtal: 27.000000 Mhz, sclk: 249.750000 Mhz, mclk: 190.125000 Mhz (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=10514 (II) RADEON(0): Output DVI-0 using monitor section Monitor0 (II) RADEON(0): I2C bus "DVO" initialized. (II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70. (II) RADEON(0): I2C bus "DVI-0" initialized. (II) RADEON(0): Output S-video has no monitor section (II) RADEON(0): Port0: Monitor -- AUTO Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- External DDC Type -- 0x6c (II) RADEON(0): Port1: Monitor -- AUTO Connector -- STV DAC Type -- TVDAC/ExtDAC TMDS Type -- None DDC Type -- 0x0 (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI-0:ddc2" removed. (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI-0:ddc2" removed. (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI-0:ddc2" removed. (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0 finished output detect: 0 (II) RADEON(0): Output: S-video, Detected Monitor Type: 0 finished output detect: 1 (EE) RADEON(0): No connected devices found! finished all detect before xf86InitialConfiguration (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI-0:ddc2" removed. (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI-0:ddc2" removed. (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI-0:ddc2" removed. (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0 (EE) RADEON(0): Using VGA default in RADEONProbeOutputModes (II) RADEON(0): Adding Screen mode: 1024x768 (II) RADEON(0): Total number of valid Screen mode(s) added: 1 (II) RADEON(0): Output: S-video, Detected Monitor Type: 0 (II) RADEON(0): Output DVI-0 connected (II) RADEON(0): Output S-video disconnected (II) RADEON(0): Output DVI-0 using initial mode 1024x768 after xf86InitialConfiguration (==) RADEON(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in (==) RADEON(0): Using XAA acceleration architecture (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 2.0 (==) RADEON(0): Assuming overlay scaler buffer width is 1536 (II) RADEON(0): Cannot access BIOS or it is not valid. If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort, RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf. (!!) RADEON(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0x90000000 - 0x9000ffff (0x10000) MX[B] [1] 0 0 0x98000000 - 0x9fffffff (0x8000000) MX[B] [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [7] -1 0 0x90000000 - 0x9000ffff (0x10000) MX[B](B) [8] -1 0 0x98000000 - 0x9fffffff (0x8000000) MX[B](B) [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [12] 0 0 0x00000400 - 0x000004ff (0x100) IX[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00000400 - 0x000004ff (0x100) IX[B](B) [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) Entering TV Save Save TV timing tables saveTimingTables: reading timing tables TV Save done (II) RADEON(0): RADEONInitMemoryMap() : (II) RADEON(0): mem_size : 0x04000000 (II) RADEON(0): MC_FB_LOCATION : 0x9bff9800 (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0 (II) RADEON(0): Memory manager initialized to (0,0) (1280,6553) (II) RADEON(0): Reserved area from (0,1200) to (1280,1202) (II) RADEON(0): Largest offscreen area available: 1280 x 5351 init memmap init common init crtc1 init pll1 freq: 75000000 best_freq: 75000000 best_feedback_div: 50 best_ref_div: 6 best_post_div: 3 restore memmap (II) RADEON(0): RADEONRestoreMemMapRegisters() : (II) RADEON(0): MC_FB_LOCATION : 0x9bff9800 0x9fff9800 (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0 restore common restore crtc1 restore pll1 finished PLL1 restore dac (==) RADEON(0): Backing store disabled (II) RADEON(0): Render acceleration enabled (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 30 256x256 slots 16 512x512 slots (II) RADEON(0): Acceleration enabled (==) RADEON(0): Silken mouse enabled (II) RADEON(0): Using hardware cursor 0 (scanline 1202) (II) RADEON(0): Using hardware cursor 1 (scanline 1205) (II) RADEON(0): Largest offscreen area available: 1280 x 5344 (II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c (II) Loading sub module "theatre_detect" (II) LoadModule: "theatre_detect" (II) Loading /usr/X11R6/lib/modules/multimedia//theatre_detect_drv.so (II) Module theatre_detect: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (II) RADEON(0): no multimedia table present, disabling Rage Theatre. (II) RADEON(0): Set up overlay video (II) RADEON(0): Set up textured video (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions//libGLcore.so (II) Module GLcore: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) GLX: Initialized MESA-PROXY GL provider for screen 0 (II) RADEON(0): Setting screen physical size to 270 x 203 (**) Option "Protocol" "wsmouse" (**) Mouse0: Protocol: wsmouse (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/wsmouse" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5 6 7" (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 (**) Mouse0: Buttons: 11 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (--) Keyboard0: using wscons layout us (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) evaluating device (Keyboard0) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) evaluating device (Mouse0) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) |
|
|||
![]()
It is PPC as stated in the thread title.
In the past, if I did not use X -configure, xorg would not get things right, especially, I have to specify the HorizSync and VertRefresh. OpenBSD 4.3 worked just fine (and so did 4.2) with the "iBooksHacks". When I bought this macmini in 2005 (one of the first, I guess) it was to switch "from" mswindows, but then I found out I like mac osx even worst. The good is, it pushed me to learn unix. So I don't want to waste disk space for something I will never use. And as I said, things were just fine in 4.3. Actually, at the time I tried different OS: freebsd, netbsd, slackware, fedora, but openbsd overall gives less problems (or none at all), For examplel, with freebsd and slackware the fan keeps running, whereas there are no such problems with openbsd, the install is also easier with openbsd. But that is really all out of topic |
|
|||
![]()
I wrote an email to the Xorg developers, and I had this answer (I tried to reinstall 4.3 and it works fine with the "iBookHacks" option. I had this answer:
Code:
the ibookhacks option must be some openbsd specific patch. If you can point me to the patch I can look at incorporating it into the upstream radeon driver. Also, I even tried to install 4.4 -current, but it does not even boot, it hangs while checking the hardware before getting to "boot>" |
|
||||
![]() Quote:
|
|
|||
![]()
well, I had a look at the repository, but I'm a bit lost, I've been clicking around a lot, but don't really know how to make a clever search. I guess I might wait until the next release and in the meantime reinstall 4.3
![]() |
|
||||
![]()
Here's a cheat to find the appropriate log entries: Install CVSync, obtain a copy of the relatively small CVSROOT repository, then grep the Changelog* files looking for comments about the hack, which will lead you to the appropriate source.
I don't have access to my CVS repositories today, else I would just do this myself. BTW, a search of the misc@ archives showed that the hack was in place at least as far back as 3.4 or 3.5. That would be in the XF4 repository, which has been retained for historical purposes such as these. Xenocara was put in place for the restructured Xorg 6.9, if I remember correctly. --- Edit: nope, Xenocara was for X.Org 7 Last edited by jggimi; 2nd February 2009 at 03:32 PM. |
|
|||
![]()
thank you I'll give it a try
|
|
||||
![]()
While I don't have access to my CVS repositories, I do have access to my cvsync.conf file, which shows all the repositories I keep. If you wish to copy/paste/edit it, you'd only require the "openbsd-cvsroot" repository collection.
Code:
config { hostname anoncvs3.usa.openbsd.org compress collection { name openbsd-cvsroot release rcs prefix /cvs umask 002 } collection { name openbsd-src release rcs prefix /cvs umask 002 } collection { name openbsd-ports release rcs prefix /cvs umask 002 } collection { name openbsd-xenocara release rcs prefix /cvs umask 002 } collection { name openbsd-www release rcs prefix /cvs umask 002 } } |
|
||||
![]()
Heh. A search of the cvs logs at the marc.info archive found this:
http://marc.info/?l=openbsd-cvs&m=108853893509324&w=2 |
|
|||
![]()
OpenBSD 4.3 came with xf86-video-ati 6.6.3, 4.4 comes with 6.9.0.
That's quite a big diff.. it could be something that changed there, or there could have been some kernel wscons/vgafb changes. The fact that you're experncing problems on both 4.4 and -CURRENT is unfortunate, I notice that you have sent an email to the PPC list, but that list doesn't appear to be high volume. Consider using sendbug(1) in 4.3, or 4.4 if you still have it installed.. otherwise, send an email to @bugs or @misc. Sorry.. ![]() |
|
|||
![]()
That new driver has the MacModel option.. which appears to be the upstream solution. (iBookHacks was a local change)
So can you confirm Option MacModel "ibook" fails? Also, can you post your xorg.conf file? ![]() |
|
||||
![]()
Lets see what the ibookhacks actually did.
According to this it was included in 3.6-release. These hacks were included in the xenocara packaging. Here's the link to the log for the xenocara version of radeon.h, and here's the link to the log for the xenocara version of radeon_driver.c. As BSDfan states, the update to 6.9.0 looks like it removed the hack. |
|
|||
![]()
I'm back
Thank you guys. Actually I just wanted to ask you if it weren't better to tell this directly to the obsd developers. I've tried all the possible combinations of MacModel: "mini", "mini-internal", "mini-external" all give access to X with no way back (while in X all works fine); all "powerbooks" options give a black screen with no way out; "ibooks" gives a black screen but allows to go back to console. Now I have 4.4 instlled, with nothing in it, because I tried everything: fresh install of 4.4, re-installation of macos X to see if it was ofirmware related (a fresh installs resets everything), I reinstalled 4.3 and found out the old "iBookHacks" words fine. Reinstalled 4.4 and double-checked all the "mini" options, nothing works. Here is the xorg.conf (this time with "mini" option): Code:
Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/share/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/OTF" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod" Load "glx" Load "record" Load "xtrap" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "wsmouse" Option "Device" "/dev/wsmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 30-60 VertRefresH 55-75 EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "DDCMode" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] Option "MacModel" "mini" # <str> #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] Identifier "Card0" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "RV280 [Radeon 9200]" BusID "PCI:0:16:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Thanks a lot for all the help |
|
||||
![]() Quote:
For instructions on how to file a bug report, including methods and required content, see http://openbsd.rt.fm/report.html |
|
|||
![]()
ok
I've just sent an email to bugs. Am I right if I reckon this will be fixed for the next release? In that case is it better for me to reinstall 4.3 and go back to normal work? |
|
|||
![]()
cool
|
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
FreeBSD 7.1 Ati Xpress 200M Xorg 7.4 problem | raduenea | FreeBSD Installation and Upgrading | 11 | 1st July 2009 12:46 AM |
Xorg + Xfce4 resolution problem | sniper007 | FreeBSD General | 4 | 30th April 2009 04:38 PM |
macmini audio | gosha | OpenBSD General | 15 | 14th January 2009 02:43 AM |
Need to use full path to commands and xorg.config problem | phreud | FreeBSD General | 4 | 17th November 2008 07:44 PM |
Xorg very slow (problem with DRI?) | Hihihi | OpenBSD General | 6 | 18th July 2008 06:21 PM |