DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Security

OpenBSD Security Functionally paranoid!

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 20th January 2012
scrummie02 scrummie02 is offline
Port Guard
 
Join Date: Nov 2011
Posts: 27
Default Bridging firewall with OPenBSD 5.0

I have a switch with multiple VLANS with a DMZ. I nave some servers that need protecting within the DMZ so I've decided to implement an OpenBSD bridging/transparent firewall.

So far I'm connected and I can ping stuff from the internal network (i.e. I can ping my gateway and servers on the "other" side of the firewall), but I can't get to the internet from the servers or nodes behind the firewall.

For some clarification here is what I have:

ext-->ASA-->DMZ--->OBSD PF ---->Protected I.P.'s

They're all the same network (192.168.10.0/24). So I can easily connect to nodes on the other side of the OpenBSD firewall just not the internet.

Here is my pf.conf
Code:
int_if = "em1"
ext_if = "em2"

localnet = "192.168.0.0/24"



# we only want to filter one interface, so pass everything on the inside interface
pass in quick on $int_if all
pass out quick on $int_if all

# block everything by default on the external interface
block in log on $ext_if all
block out log on $ext_if all

# allow UDP DNS traffic
pass out log quick on $ext_if proto udp from $localnet to any port 53 keep state

# allow FTP, SSH, DNS and HTTP traffic to trusted networks
pass out log quick on $ext_if proto tcp from $localnet to any \
     port { 20, 21, 22, 53, 80, 81, 443 } modulate state

# allow incomming FTP, SSH, and HTTP traffic
pass in log quick on $ext_if proto tcp from any to $localnet \
     port { 80, 443 } modulate state

# allow pings
pass in log on $ext_if proto icmp from any to $localnet icmp-type 8 code 0 keep state
pass out log on $ext_if proto icmp from $localnet to any icmp-type 8 code 0 keep state
Also, I'm questioning whether a bridging firewall would be good as opposed to just a filtering firewall. Since all of the machines are already IP'ed I don't want to change any IP's and double NAT is messy.

Any help is appreciated.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenBSD, PF, bridging and 10gE mbw OpenBSD Security 6 5th January 2012 08:51 PM
requesting help with "New" way to do Bridging in OpenBSD 4.7 mbw OpenBSD Installation and Upgrading 1 30th May 2010 12:06 AM
OpenBSD firewall with only one physical NIC idosch OpenBSD Security 5 25th April 2010 12:11 AM
DIY OpenBSD Firewall Appliance mikesg OpenBSD Security 34 6th January 2010 06:17 AM
OpenBSD firewall resources J65nko OpenBSD Security 0 1st June 2008 02:28 AM


All times are GMT. The time now is 04:49 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick