DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD Installation and Upgrading

NetBSD Installation and Upgrading Have trouble getting NetBSD on your toaster?

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 3 Weeks Ago
oziron oziron is offline
New User
 
Join Date: Jun 2017
Posts: 2
Default Boot problems

So I Installed netBSD on an old pentium 1 laptop I had laying around with 32MB ram. The problem is when it goes to boot it hangs on boot: and then I don't know what to type. If I do boot hd0a:netbsd the text turns green but eventually it hangs after attempting to load. I used to use a boot command that seemed to work but now I don't remember what it is.

I also installed FreeBSD on another pc onto the HDD since the installer would not work on this old pc. But when I put it back in it also hangs on boot:

Something must be up with how this old pc uses mbr with hdd? I am not sure. I am using CF to IDE converter if that makes a different. I am also fairly new with BSD but have had more linux experience.
Reply With Quote
  #2   (View Single Post)  
Old 3 Weeks Ago
shep shep is offline
Rc.conf Instructor
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 1,000
Default

Depending on the version of FreeBSD, you may have a mix of gpt/mbr boot sectors. There are a number of utilities to zero out the boot sectors or it can be done manually with dd(1). Be aware that many hard drives backup gpt from the first 2 sectors to the last sectors of the drive.

Search for "zero out gpt" and look at http://www.rodsbooks.com/gdisk/index.html
Reply With Quote
  #3   (View Single Post)  
Old 2 Weeks Ago
oziron oziron is offline
New User
 
Join Date: Jun 2017
Posts: 2
Default

so after running the installer and booting from cd it asks me for my init path. Not sure why as this should have been installed. Also it says it can't find dev/console. I know it has problems installing console. Every time when I tell it to use BIOS the installer errors and wont let me and I have to choose use default for the installer not to stop. How do I fix init and get it to use console?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Invalid Signature when trying to boot Ubuntu 14.04 (Dual Boot) bsd007 FreeBSD General 7 18th September 2014 12:37 PM
geli attach during boot problems libertas FreeBSD Installation and Upgrading 2 9th April 2013 01:45 PM
three problems :) craze OpenBSD Packages and Ports 6 6th March 2011 03:26 PM
Xtracting Data after Fragmentation / Block Count / Partition Problems on Boot IronForge OpenBSD Installation and Upgrading 3 16th December 2010 01:09 AM
Dual-boot laptop won't boot OpenBSD after upgrade to 4.3 kbeaucha OpenBSD Installation and Upgrading 17 30th May 2008 02:40 PM


All times are GMT. The time now is 07:22 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick