|
OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD. |
|
Thread Tools | Display Modes |
|
|||
xombrero segfaults on OpenBSD -current macppc
Hi everybody !
I'm running the last snapshot on iBook G4 : Code:
kern.version=OpenBSD 5.4-current (GENERIC) #54: Tue Oct 15 02:17:27 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC This is not happening on i386 arch. |
|
|||
dmesg :
Code:
[ using 551344 bytes of bsd ELF symbol table ] console out [ATY,Via_A]console in [keyboard] , using ADB using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4-current (GENERIC) #54: Tue Oct 15 02:17:27 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 268435456 (256MB) avail mem = 246067200 (234MB) mainbus0 at root: model PowerBook6,5 cpu0 at mainbus0: 7447A (Revision 0x101): 1066 MHz: 512KB L2 cache mem0 at mainbus0 spdmem0 at mem0: no EEPROM found spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5 memc0 at mainbus0: uni-n rev 0xd2 "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 adt0 at iic0 addr 0xae: adt7467 rev 0x71 mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 radeondrm0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01: irq 48 drm0 at radeondrm0 mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 "modem-reset" at macgpio0 offset 0x1d not configured "modem-power" at macgpio0 offset 0x1c not configured macgpio1 at macgpio0 offset 0x9: irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured dfs0 at macgpio0 offset 0x6b: speeds: 1066, 533 MHz "gpio4" at macgpio0 offset 0x1e not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets apm0 at adb0: battery flags 0x5, 0% charged piic0 at adb0 iic1 at piic0 akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout) wskbd0 at akbd0: console keyboard ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8123, CA0T> ATAPI 5/cdrom removable cd0(wdc0:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address 00:0d:93:ee:95:91 ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <HTS421260H9AT00> wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:b3:df:b0 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd root on wd0a (01303bffef94bfcd.a) swap on wd0b dump on wd0b WARNING: clock lost 9598 days, using FS time -- CHECK AND RESET THE DATE! drm: initializing kernel modesetting (RV280 0x1002:0x5C63 0x1002:0x5C63). error: [drm:pid0:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM drm: Using generic clock info radeondrm0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (32M used) ttm_pool_mm_shrink_init stub trying to bind memory to uninitialized GART ! error: [drm:pid0:radeon_ttm_backend_bind] *ERROR* failed to bind 1 pages at 0x00000000 error: [drm:pid0:radeon_wb_init] *ERROR* (-22) create WB bo failed error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration drm: radeon: cp finalized drm: radeon: cp finalized Finalizing pool allocator ttm_pool_mm_shrink_fini stub drm: Zone kernel: Used memory at exit: 0 kiB drm: radeon: ttm finalized drm: Forcing AGP to PCI mode error: [drm:pid0:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM drm: Using generic clock info radeondrm0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (32M used) radeondrm0: GTT: 512M 0x0000000078000000 - 0x0000000097FFFFFF ttm_pool_mm_shrink_init stub drm: PCI GART of 512M enabled (table at 0x0000000001249000). drm: Connector Table: 2 (ibook) drm: No panel info found in BIOS drm: Panel info derived from registers drm: Panel Size 1024x768 drm: No TV DAC info found in BIOS radeondrm0: 1024x768 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) |
|
|||
That's all I get when launching xombrero :
Code:
xombrero:/usr/local/lib/libestdc++.so.14.0: /usr/lib/libstdc++.so.56.0 : WARNING: symbol(_ZN11__gnu_debug17_S_debug_messagesE) size mismatch, relink your program xombrero: config_parse: cannot open /home/giryu/.xombrero.conf: No such file or directory Segmentation fault midori segfaults as well ! seems like Brave Xombrero is not to blame at all. |
|
|||
Quote:
Are you building packages from source? If so, why? Why not go use the packages found at the mirror sites? Looking at ftp.openbsd.org, the timestamp on xombrero-1.6.3v1.tgz is 17 October. Without researching this any further given that this is only two days newer than the snapshot, I would assume this is synchronized enough to the 15 October snapshot mentioned to work correctly. However, this is only an assumption. Again, you give no evidence that you understand the ramifications discussed in Section 15.4.1 of the FAQ which has been mentioned to you before. |
|
|||
Hi ocicat !
It was a fresh install to avoid upgrade-related problems (of of which was the bad X display when I moved from 5.3 stable to current .. which is now history :-) ) This recent thread http://www.daemonforums.org/showthread.php?t=8152 is about the same iBook G4 , I put *installed* between asterisks Quote:
|
|
||||
Quote:
The "snapshot packages" that can be found at mirrors in /pub/OpenBSD/snapshots/packages/<arch> are made available for user convenience, for the popular architectures. They are not going to be perfectly in sync with the snapshots avilable for the same architecture. Here's why:
OpenBSD -current users are expected to recognize this situation and build these particular packages from ports, themselves. |
|
|||
Quote:
...& if you find that a new snapshot or package does not work for you, you can easily restore from backup, because good system administrators perform backups on a regular basis, & before performing massive configuration changes. Last edited by ocicat; 28th October 2013 at 04:37 AM. Reason: spelling |
|
|||
jggimi , ocicat , thank you and sorry for being late (as usual).
Am I right to conclude that being-current nullifies the rule of thumb stated in the faq : Quote:
|
|
|||
No. However, there are times when the libraries are bumped in snapshots, but the available packages lag behind. This is a situation which necessitates building locally because the available -current packages are out of synchronization with the base system.
|
|
||||
Snapshot packages are made available to -current users for convenience, only. They may or may not be usable with either a snapshot or with a built-from-source -current.
Synchronicity with snapshot packages cannot be assured, and the impact of an out-of-sync environment is described in FAQ 15.4.1. However, snapshot packages are truly convenient. Building from ports takes time and resources. Sometimes they are sufficiently out-of-sync that they will not install. At other times, they may install but present problems. Some more level setting about -current:
|
|
|||
Another option is to be patient and stay with precompiled packages.
Current development tends to run in cycles with the most stable time period occurring when ports is frozen in preparation for a new release. Conversely, you will see more update errors shortly after base and ports are "unfrozen". Typically the developers will do a major update to key packages at that time. Look at the mailing lists, follow the discussions (there is a thread on xombrero breakage as we speak) and retry your upgrade after a new ports build hits your OpenBSD server of choice. |
|
|||
jggimi, ocicat, shep , million thanks to all of you !
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
building xombrero for NetBSD 6.1.2 | pawaan | NetBSD Package System (pkgsrc) | 0 | 15th October 2013 06:45 PM |
OpenBSD -current is now OpenBSD 5.1 beta | ocicat | News | 0 | 11th January 2012 10:21 PM |
Xorg 1.6.5 on OBSD 4.7 segfaults. :( | Lilith | OpenBSD General | 13 | 7th August 2010 03:09 AM |
openbsd 4.5 macppc radeon drive still broken | gosha | OpenBSD Installation and Upgrading | 13 | 28th June 2009 03:14 PM |