DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 9th September 2017
jwhal jwhal is offline
Port Guard
 
Join Date: May 2008
Posts: 20
Default Console mode issues

Hi there.

I'm having an issue that when booting into the console (no X), the console no longer fills the entire width and height of the physical screen. The fonts are smaller than they used to be. Tested on numerous versions of -current.

It started happening sometime around this commit:

https://marc.info/?l=openbsd-cvs&m=149892552701140&w=2

It seems that someone else on the misc mailing list is experiencing similar issues, but with different hardware and no apparent response/solution:

https://marc.info/?l=openbsd-misc&m=150195077423715&w=2

I'm not really sure how to troubleshoot this and was hoping someone may be able to offer suggestions. I was unable to find anything further on the mailing lists.

One thing I've noticed, though likely irrelevant, is that the dmesg output for my video card says "Not configured", despite being listed as a supported device under intel(4). X works fine.

I know it's a really old laptop, but it's served me well despite being cheap.

Dmesg and pcidump -v below...not sure if there is any other info I can provide which may help.

Current dmesg:
Code:
OpenBSD 6.2-beta (GENERIC.MP) #82: Fri Sep  8 11:18:48 MDT 2017
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 4268150784 (4070MB)
avail mem = 4131786752 (3940MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf7190 (45 entries)
bios0: vendor Dell Inc. version "A17" date 10/27/2009
bios0: Dell Inc. Inspiron 1525
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG SLIC OSFR BOOT SSDT
acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S5) RP02(S3) RP03(S3) RP04(S3) RP05(S3) RP06(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.39 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.01 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (PCIE)
acpiprt1 at acpi0: bus 9 (RP01)
acpiprt2 at acpi0: bus 11 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 12 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 98 degC
"PNP0F13" at acpi0 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL-HP2877" serial 55 type LION oem "SMP"
"PNP0C32" at acpi0 not configured
"*pnp0c14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VID2
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
inteldrm0 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 848x480, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Conexant/0x2c06, CMD Technology/0x1392, Sigmatel STAC9228X, using Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi
pci1 at ppb0 bus 9
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8040" rev 0x12, Yukon-2 FE+ rev. A0 (0x0): msi
msk0 at mskc0 port A: address 00:21:9b:f6:2e:c3
eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi
pci2 at ppb1 bus 11
"Broadcom BCM4315" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi
pci3 at ppb2 bus 12
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 20
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 2
"Ricoh 5C832 Firewire" rev 0x05 at pci4 dev 9 function 0 not configured
sdhc0 at pci4 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2 int 18
sdhc0: SDHC 1.0, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"Ricoh 5C843 MMC" rev 0x12 at pci4 dev 9 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci4 dev 9 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci4 dev 9 function 4 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-T21N, A1R1> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: PHY offline on port 2
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS54322, FBEO> SCSI3 0/direct fixed naa.5000cca55fd5d503
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: ALPS Glidepoint, version 0x7321
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
scsibus3 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <SD/MMC, SD16G, 0030> SCSI2 0/direct removable
sd1: 15087MB, 512 bytes/sector, 30898176 sectors
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
uvideo0 at uhub0 port 1 configuration 1 interface 0 "OmniVision Technologies, Inc. -2640-08.05.12.1 Laptop Integrated Webcam" rev 2.00/1.00 addr 2
video0 at uvideo0
urtwn0 at uhub1 port 3 configuration 1 interface 0 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 74:da:38:2b:28:58
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub4 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (a45f25575844d913.a) swap on sd0b dump on sd0b
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
vblank wait timed out on crtc 1
pcidump -v:
Code:
Domain /dev/pci0:
 0:0:0: Intel GM965 Host
	0x0000: Vendor ID: 8086 Product ID: 2a00
	0x0004: Command: 0006 Status: 2090
	0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 0c
	0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
	0x0010: BAR empty (00000000)
	0x0014: BAR empty (00000000)
	0x0018: BAR empty (00000000)
	0x001c: BAR empty (00000000)
	0x0020: BAR empty (00000000)
	0x0024: BAR empty (00000000)
	0x0028: Cardbus CIS: 00000000
	0x002c: Subsystem Vendor ID: 1028 Product ID: 022f
	0x0030: Expansion ROM Base Address: 00000000
	0x0038: 00000000
	0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
	0x00e0: Capability 0x09: Vendor Specific
 0:2:0: Intel GM965 Video
	0x0000: Vendor ID: 8086 Product ID: 2a02
	0x0004: Command: 0007 Status: 0090
	0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 0c
	0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
	0x0010: BAR mem 64bit addr: 0x00000000fea00000/0x00100000
	0x0018: BAR mem prefetchable 64bit addr: 0x00000000e0000000/0x10000000
	0x0020: BAR io addr: 0x0000eff8/0x0008
	0x0024: BAR empty (00000000)
	0x0028: Cardbus CIS: 00000000
	0x002c: Subsystem Vendor ID: 1028 Product ID: 022f
	0x0030: Expansion ROM Base Address: 00000000
	0x0038: 00000000
	0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
	0x0090: Capability 0x05: Message Signalled Interrupts (MSI)
	0x00d0: Capability 0x01: Power Management
		State: D0
 0:2:1: Intel GM965 Video
	0x0000: Vendor ID: 8086 Product ID: 2a03
	0x0004: Command: 0007 Status: 0090
	0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 0c
	0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
	0x0010: BAR mem 64bit addr: 0x00000000feb00000/0x00100000
	0x0018: BAR empty (00000000)
	0x001c: BAR empty (00000000)
	0x0020: BAR empty (00000000)
	0x0024: BAR empty (00000000)
	0x0028: Cardbus CIS: 00000000
	0x002c: Subsystem Vendor ID: 1028 Product ID: 022f
	0x0030: Expansion ROM Base Address: 00000000
	0x0038: 00000000
	0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
	0x00d0: Capability 0x01: Power Management
		State: D0

Last edited by ocicat; 11th September 2017 at 07:21 PM. Reason: Please use [code] & [/code] tags when posting file contents.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Disable console on Multi User Mode Peter_APIIT OpenBSD Security 4 1st November 2015 12:43 PM
any console-mode alternative to ip2nation.com daemonfowl General software and network 4 11th May 2012 03:39 PM
Sun XVR-600 in 24-bit mode Don_HH2K OpenBSD Installation and Upgrading 2 30th June 2010 08:06 PM
no-tab-mode in mg? Sunnz OpenBSD General 0 10th March 2010 12:10 PM
wlan -> monitor mode ccc FreeBSD Security 2 4th November 2008 09:19 PM


All times are GMT. The time now is 08:24 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick