|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
X11 with VESA or graphic card HD5870 driver with 1440x900 resolution does not work
Hello,
I got some problems with my xorg.conf config on my 1440x900 screen with my HD 5870 card. The best resolution I can use is: 1280x1024 (xrandr shows me this resolution as max value) I'm comin from gentoo/debian/archlinux distributions and know that there ati drivers are in use for my screenresolution. It works there with entering: Code:
driver "ati" Modes "1440x900" Sorry, this forum is not very friendly for new users due to URL posting restriction. So I have to do it this way: First of all, I started here: openbsd.org/faq/faq11.html and went over to this page freebsd.org/doc/de/books/handbook/x-config.html to try new things out. Here is my xorg.conf: pastebin.com/QTL3UaZy and here is my logfile for X: pastebin.com/0g0fUiBC Last edited by J65nko; 12th December 2011 at 04:23 PM. Reason: Added URL tags ;) |
|
|||
Spam is a significant problem with vBulletin-based forum sites. We take spam prevention very seriously, & one way to control this is to restrict new users' privileges. While we understand this places a burden on newcomers, it is only a temporary inconvenience as more posts are made.
|
|
|||
openBSDheart, the HD5870 does not currently have any 2D acceleration on OpenBSD. Such acceleration requires kernel modesetting, which is not yet implemented for radeon GPUs on any *BSD.
However, basic 2D modesetting, including a 1440x900 resolution, should work with a relatively recent version of xf86-video-ati. I'm not in front of my OpenBSD box at the moment, so I don't know what version OpenBSD ships with, but it's quite possible (likely, even) that it's not new enough. Please show us your /var/log/Xorg.0.log file. Adam |
|
|||
Adamk, as stated in the first post, the "/var/log/Xorg.0.log" can be found at http://pastebin.com/0g0fUiBC
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump |
|
|||
D'oh. Stupid, silly me...
openBSDheart, if you change vesa to radeon in line 62 of your xorg.conf file, does X start with the radeon driver? Adam |
|
|||
Hi Adam,
no it does not work with radeon. I tested it before with "radeon" and "hdradeon". Later I discovered in the man that it will not work with this configuration, case the graphic card is not supported in radeon or hdradeon. |
|
|||
Can it be possible, that it will not work for me, cause I selected:
NOT to use non-free drivers (while openBSD5.0 installation was going on) ... If u think so, I can reinstall it agian, cause I haven't made nearly no chances, yet. But if u rather think, it will not be due to this problem, I prefer to use only open source and not to use non-free software instead |
|
|||
There is no non-free driver for your GPU for OpenBSD.
hdradeon is not a driver, but radeonhd is. It's open source but only supports x1600 through HD4xxx GPUs. On linux, the radeon driver supports all radeon GPUs, but requires kernel modesetting for acceleration on HD5xxx and higher and even modesetting on HD6xxx and higher. So, theoretically, you can get basic modesetting working on your GPU with the 'radeon' driver, but you need a newer version. OpenBSD 5.0 comes with xf86-video-ati version 6.12.2, while modesetting for HD5xxx GPUs requires at least 6.13.0. If you know what you are doing, you could grab ftp://ftp.freedesktop.org/pub/indivi...-6.13.2.tar.gz and compile it yourself. That will likely also involve upgrading libdrm, though. |
|
|||
ok, so far, I try to bring up my resolution for another graphiccard HD4670 (on another workstation next to me) with openBSD5.0 for testing.
If this will work and I collect some experience more with openBSD, I will try the next step with my HD5870 and will report it here. So far, I wanna say thank u all for ur help and leave this topic unsolved, but still open, if it's ok, till I can solve it or u can ;-) |
|
|||
Quote:
What we do ask members is:
|
|
|||
Your HD4670 should work just fine, even with basic 3D acceleration. I have it working here with an HD4850, on two monitors, one at 1680x1050 and one at 1600x900.
I tried upgrading xf86-video-ati, but it did require updating libdrm. When I tried updating to the latest release of libdrm, it failed to build. I may revisit this later, but, yeah, I'd use the HD4670 for now :-) Adam |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LCD Screen Resolution | mgh21 | General Hardware | 3 | 3rd September 2011 07:23 PM |
VMT driver (VMware Tools driver) on OpenBSD 4.8 | xinform3n | OpenBSD General | 7 | 9th December 2010 10:48 PM |
Resolution problem.. | PCBSD3000 | FreeBSD General | 5 | 13th April 2009 07:56 PM |
Intel ATOM D945GCLF onboard LAN driver-card problem | mona | FreeBSD Installation and Upgrading | 7 | 17th December 2008 04:50 PM |
Changing resolution | Cloud | General software and network | 3 | 27th June 2008 06:03 PM |