|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Need help urgently !!!
The level of principle, I need to know what kind of topology i need to use
for my alix board. I mean I bought a board called ALIX 6E1 how has two ports (ETHERNET (vr0 vr1. I want to set the board to use as a router. I want to know Should I set the vr0 as WAN and set it as dhcpclient who gets the IP address from the modem or through a wireless network card form my laptop who is connected to the home router . In addition the vr1 port as LAN and configure it as dhcp server which will give an ip address to my laptop behind it. Do I need to configure NAT between the two ETHERNET port or is there another way to implement these settings. I run on the board OPENBSD 4.9 operating system and the laptop I have WIN 7 64 BIT. I'm trying for a long time to figure out what option to choose to define the best and fastest. In addition there is a USB port in the board that I want to connect to NETSTICK mobile communications. I mean I also need to set some kind of protocol regulating communication when I'm connecting Through a dsl and i lose comunecation I will pass to the mobile communications. I would welcome any help given, I'm sorry for my misunderstanding but this how i learn . Matthew. |
|
|