|
OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
|
Thread Tools | Display Modes |
|
||||
OpenBSD 5.5 and Realtek 8111G support ?
Hello,
First post here, just a reader usually, hello :-) I have bought a brandnew shuttle DS437 with a Realtek 8111G double network cards, and downloaded OpenBSD 5.5 amd64 released last May 1. I expected to build a home router/gateway and was very eager to begin. However, although the network cards are detected as re0 and re1, and that link is detected, no traffic passes : no DHCP, and no reply from the gateway when given a fixed IP address (pinging my own address works however). Below is the dmesg : Code:
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4167335936 (3974MB) avail mem = 4047790080 (3860MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb530 (73 entries) bios0: vendor American Megatrends Inc. version "1.01" date 09/25/2013 bios0: Shuttle Inc. DS437 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SLIC HPET SSDT SSDT SSDT acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz, 1796.20 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz, 1795.92 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 4 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) acpiec0 at acpi0: Failed to read resource settings acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpipwrres0 at acpi0: FN00, resource for FAN0 acpipwrres1 at acpi0: FN01, resource for FAN1 acpipwrres2 at acpi0: FN02, resource for FAN2 acpipwrres3 at acpi0: FN03, resource for FAN3 acpipwrres4 at acpi0: FN04, resource for FAN4 acpitz0 at acpi0: critical temperature is 106 degC acpitz1 at acpi0: critical temperature is 106 degC acpibat0 at acpi0: BAT0 not present acpibat1 at acpi0: BAT1 not present acpibat2 at acpi0: BAT2 not present acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpivideo0 at acpi0: GFX0 cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 774 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09 intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1680x1050 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 00:00:00:00:00:00 rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 3 vendor "ASMedia", unknown product 0x1142 (class serial bus subclass USB, rev 0x00) at pci3 dev 0 function 0 not configured ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi pci4 at ppb3 bus 4 re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 80:ee:73:83:50:ec rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0 ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel NM70 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, SanDisk SDSSDRC0, 3.0.> SCSI3 0/direct fixed naa.5001b44bc185a32c sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa30 uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub2 port 1 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 3 uhidev0 at uhub3 port 3 configuration 1 interface 0 "vendor 0x0b38 product 0x0010" rev 1.10/1.02 addr 4 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 I am very surprised because the OpenBSD 5.5 changelog says (emphasis is mine) : Quote:
Any help will be greatly appreciated. Regards, Guillaume. Last edited by gkbsd; 2nd May 2014 at 05:51 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Virtio Support :: OpenBSD | liquidshane | OpenBSD General | 3 | 23rd June 2012 10:13 PM |
OpenBSD Support for Realtek 802.11n USB devices | J65nko | News | 0 | 18th December 2010 11:00 PM |
OpenBSD 4.7 Kernel threads support | rohitk | OpenBSD General | 6 | 28th July 2010 05:28 AM |
Realtek Gigabit 8169SC Network card not workies!! | ashleyd | FreeBSD General | 5 | 11th August 2008 12:50 PM |
Does OpenBSD support WPA? | Dazhelpwiz | OpenBSD General | 3 | 25th May 2008 01:26 AM |