DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 14th September 2009
knasbas knasbas is offline
Port Guard
 
Join Date: May 2008
Posts: 25
Default No ram left?

I recently saw that im very short on ram and not really sure why?
Besides top(shown below), is there any possibility to see what process has been using/leaking or whatever has happened?
I have heard that rtorrent has some kind of leak but it hasnt been any problem so far so why would it be that if i havent changed it.

I added 512mb of ram about 2 weeks ago when i noticed that i was low on ram but it didnt really change anything.
top output:
Code:
load averages:  0.09,  0.11,  0.08                                                                          10:47:24
33 processes:  32 idle, 1 on processor
CPU states:  0.0% user,  0.0% nice,  0.0% system,  0.0% interrupt,  100% idle
Memory: Real: 22M/1262M act/tot  Free: 243M  Swap: 16M/5120M used/tot

  PID USERNAME PRI NICE  SIZE   RES STATE    WAIT      TIME    CPU COMMAND
 8605 www        2    0 2876K 4172K sleep    netio     0:13  1.27% httpd
30822 root       2    0  964K 1112K sleep    select    0:29  0.00% sendmail
 6643 www        2    0 2928K 4180K sleep    netio     0:25  0.00% httpd
20984 www        2    0 2948K 1160K sleep    netio     0:24  0.00% httpd
 1896 root       2    0 2704K  380K sleep    select    0:30  0.00% httpd
16326 www        2    0 2860K 1164K sleep    netio     0:21  0.00% httpd
18154 www        2    0 2916K 4176K sleep    netcon    0:17  0.00% httpd
26836 www        2    0 2872K 4176K sleep    netcon    0:16  0.00% httpd
25336 www        2    0 3044K 4176K sleep    netio     0:15  0.00% httpd
13111 www        2    0 2908K 4172K sleep    netcon    0:13  0.00% httpd
31382 www        2    0 2868K 4176K sleep    netio     0:12  0.00% httpd
18432 root       2    0 1032K  892K sleep    select    0:12  0.00% nmbd
 8432 _syslogd   2    0  476K  632K sleep    poll      0:07  0.00% syslogd
12957 root       2    0  528K    4K idle     select    0:05  0.00% sshd
23574 root       2    0 3176K 1192K idle     select    0:05  0.00% smbd
 5300 www        2    0 2872K 1152K sleep    netcon    0:05  0.00% httpd
 9182 root       2    0  456K    4K idle     select    0:03  0.00% inetd
 8915 root       2    0  468K  512K idle     select    0:01  0.00% cron
    1 root      10    0  320K   96K idle     wait      0:00  0.00% init
12533 root       2    0 2776K    4K idle     select    0:00  0.00% smbd
17143 _dhcp      2    0  344K    4K idle     poll      0:00  0.00% dhclient
 5756 root       2    0 3536K 2500K sleep    select    0:00  0.00% sshd
12244 root      28    0  552K 1344K onproc   -         0:00  0.00% top
 5089 root       2    0  296K    4K idle     poll      0:00  0.00% dhclient
27067 root       2    0  440K    4K idle     netio     0:00  0.00% syslogd
30210 root      10    0  936K 1576K idle     wait      0:00  0.00% bash
  580 root       3    0  240K    4K idle     ttyin     0:00  0.00% getty
 7592 root       3    0  232K    4K idle     ttyin     0:00  0.00% getty
31051 root       3    0  312K    4K idle     ttyin     0:00  0.00% getty
23669 root       3    0  240K    4K idle     ttyin     0:00  0.00% getty
 5672 root       3    0  300K    4K idle     ttyin     0:00  0.00% getty
17163 www        2    0 2704K 1772K sleep    netcon    0:00  0.00% httpd
 8239 root      18    0 2776K    4K idle     pause     0:00  0.00% smbd
dmesg output:
Code:
OpenBSD 4.5-stable (GENERIC) #0: Wed Jul 22 16:12:03 CEST 2009
    root@:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.92 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 1610104832 (1535MB)
avail mem = 1547571200 (1475MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/22/04, BIOS32 rev. 0 @ 0xfb3f0, SMBIOS rev. 2.2 @ 0xf0800 (37 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 11/22/2004
bios0: http://www.abit.com.tw/ NF7-S/NF7,NF7-V (nVidia-nForce2)
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12 14 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x9800 0xcc000/0x5000 0xd1000/0x1000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
agp at pchb0 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
iic0: addr 0x4e 01=08 02=01 03=01 04=01 05=80 06=0b 07=00 08=00 09=00 0a=eb 0b=00 0c=00 0d=00 0e=00 0f=00 3e=08 48=08 4a=08 4e=08 f0=00 f1=00 f2=00 f3=00 f4=00 f5=00 f6=00 f7=00 f8=00 f9=00 fa=00 fb=00 fc=00 fd=00 fe=08 ff=00 words 00=28ff 01=08ff 02=01ff 03=01ff 04=01ff 05=80ff 06=0bff 07=00ff
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL2.5
iic1 at nviic0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
pciide0 at pci1 dev 8 function 0 "Promise PDC40718" rev 0x02: DMA
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD753LJ>
wd0: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 7
wd1 at pciide0 channel 1 drive 0: <ST31500341AS>
wd1: 16-sector PIO, LBA48, 1430799MB, 2930277168 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
wd2 at pciide0 channel 2 drive 0: <SAMSUNG HD753LJ>
wd2: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd2(pciide0:2:0): using BIOS timings, Ultra-DMA mode 7
wd3 at pciide0 channel 3 drive 0: <SAMSUNG HD401LJ>
wd3: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd3(pciide0:3:0): using BIOS timings, Ultra-DMA mode 7
pciide0: using irq 11 for native-PCI interrupt
em0 at pci1 dev 9 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 10, address 00:1b:21:14:87:60
pciide1 at pci1 dev 11 function 0 "CMD Technology SiI3112 SATA" rev 0x02: DMA
pciide1: using irq 15 for native-PCI interrupt
pciide1: port 0: device present, speed: 1.5Gb/s
wd4 at pciide1 channel 0 drive 0: <SAMSUNG HD753LJ>
wd4: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd4(pciide1:0:0): using BIOS timings, Ultra-DMA mode 7
pciide1: port 1: device present, speed: 1.5Gb/s
wd5 at pciide1 channel 1 drive 0: <SAMSUNG HD401LJ>
wd5: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd5(pciide1:1:0): using BIOS timings, Ultra-DMA mode 7
pciide2 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide2: channel 0 ignored (disabled)
pciide2: channel 1 ignored (disabled)
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce256 DDR" rev 0x10
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fbfd netmask fffd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd3a swap on wd3b dump on wd3b

Last edited by vermaden; 14th September 2009 at 09:12 AM. Reason: Use [ code ] tag instead of [ quote ] for listings.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
no space left on drive while installing? knasbas OpenBSD Installation and Upgrading 2 20th July 2009 09:50 PM
left handed mouse techmarks FreeBSD General 2 2nd October 2008 10:17 PM


All times are GMT. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick