|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Quote:
As for Realtek support, the output of the following command: $ man -k realtek ...does not indicate that the RTL8192E chipset is supported. BTW, welcome to our community! |
|
||||
Quote:
Code:
penBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 2007429120 (1914MB) avail mem = 1939963904 (1850MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe81a0 (33 entries) bios0: vendor INSYDE version "1.20" date 07/03/2009 bios0: TOSHIBA Satellite L500 acpi0 at bios0: rev 2 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SLIC BOOT SSDT SSDT acpi0: wakeup devices LID0(S4) P32_(S0) UHC1(S3) UHC2(S3) ECHI(S3) EXP1(S4) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, 2194.79 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,LONG cpu0: 1MB 64b/line 4-way L2 cache cpu0: apic clock running at 199MHz ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P32_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpiprt5 at acpi0: bus -1 (EXP4) acpiprt6 at acpi0: bus 7 (EXP5) acpiprt7 at acpi0: bus -1 (EXP6) acpiprt8 at acpi0: bus -1 (PEGP) acpiec0 at acpi0 acpicpu0 at acpi0: C2, C1 acpipwrres0 at acpi0: FN00 acpitz0 at acpi0: critical temperature is 114 degC acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "PA372" serial 0109 type Li-ion acpivideo0 at acpi0: OVGA acpivout0 at acpivideo0: DD03 acpivideo1 at acpi0: VGA_ pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x80000000, size 0x10000000 inteldrm0 at vga1: apic 4 int 16 drm0 at inteldrm0 "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 21 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 19 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Realtek ALC272, AT&T/Lucent/0x1040, using Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci1 at ppb0 bus 2 re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic 4 int 16, address 00:1e:33:f0:f5:e5 rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 3 "Realtek RTL8192E" rev 0x01 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 7 uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 4 int 23 uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 4 int 19 uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 4 int 16 uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x03: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 4 int 23 ehci1: timed out waiting for BIOS usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci4 at ppb3 bus 4 pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 19 for native-PCI interrupt wd0 at pciide0 channel 1 drive 0: <TOSHIBA MK1655GSX> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 4 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 4 int 19 for native-PCI interrupt atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ880AS, 1.40> ATAPI 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 2 configuration 1 interface 0 "SuYin USB 2.0 Camera" rev 2.00/4.06 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (6a97ecd95d4ab498.a) swap on wd0b dump on wd0b |
|
|||
Hey all... first post here. Got 5.0 running on a Dell Latitude D620. Still getting some usability stuff worked out (all small things I can fix with google and daemonforums). On my other boxes I've run Ubuntu almost exclusively. The lack of bloatware is different but awesome.
dmesg: Code:
OpenBSD 5.0 (GENERIC.MP) #59: Wed Aug 17 10:19:44 MDT 2011 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM real mem = 2145452032 (2046MB) avail mem = 2100277248 (2002MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/16/08, BIOS32 rev. 0 @ 0xffa10, SMBIOS rev. 2.4 @ 0xf6ea0 (62 entries) bios0: vendor Dell Inc. version "A10" date 05/16/2008 bios0: Dell Inc. Latitude D620 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S5) USB0(S0) USB1(S0) USB2(S0) USB3(S0) EHCI(S0) AZAL(S3) PCIE(S4) RP01(S3) RP02(S4) NIC_(S5) RP04(S3) RP05(S3) RP06(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 3 (PCIE) acpiprt3 at acpi0: bus 11 (RP01) acpiprt4 at acpi0: bus 12 (RP02) acpiprt5 at acpi0: bus 9 (PXP0) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP06) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 126 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "DELL PD6856" serial 1894 type LION oem "SMP" acpibat1 at acpi0: BAT1 not present acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpidock0 at acpi0: GDCK not docked (0) acpivideo0 at acpi0: VID_ acpivideo1 at acpi0: VID_ acpivideo2 at acpi0: VID2 bios0: ROM list: 0xc0000/0x10000 cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 2 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 Go" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi azalia0: codecs: Sigmatel STAC9200, Conexant/0x2bfa, using Sigmatel STAC9200 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16 pci2 at ppb1 bus 11 ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 pci3 at ppb2 bus 12 wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW1, address 00:18:de:b3:cc:10 ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18 pci4 at ppb3 bus 9 bge0 at pci4 dev 0 function 0 "Broadcom BCM5752" rev 0x02, BCM5752 A2 (0x6002): apic 2 int 18, address 00:18:8b:a3:8c:d6 brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 pci5 at ppb4 bus 3 cbb0 at pci5 dev 1 function 0 "O2 Micro OZ69[17]2 CardBus" rev 0x40: apic 2 int 18 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <Hitachi HTS721060G9SA00> wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L632D, DE03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub5 at uhub0 port 2 "Dell product 0xa005" rev 2.00/50.18 addr 2 uhub6 at uhub5 port 3 "vendor 0x0b97 product 0x7761" rev 1.10/1.10 addr 3 ugen0 at uhub6 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (6f22f0ee336bf114.a) swap on wd0b dump on wd0b |
|
|||
Acer 5742Z here, working pretty well. I haven't tried the wireless yet.
The basics all seem to work well enough under XFCE4, OpenBSD 5. |
|
|||
running current on Dell Latitude D420 upgraded with a 2Gb dimm, a second internal wireless adapter (intel), a docking station, bluetooth (and a new keyboard b/c of beer spill, puffy loves beer hehe). Everything works except IR and FireWire. I'm running i386 current for two years as far as i recall, today with rthreads, the fixed Intel graphics xenocara driver and the ram upgrade this notebook is a beast, small, lightweight and great looking. APM works like a charm, i'm noticing that both the 6 and 9 cell batteries die faster than other os'es but then hey no scientific testing has been done as i don't care. just to rant a bit, i've never seen the urge to use gnome, kde or anything bloated and i've been using scrotwm which now is spectrwm and it's rock solid. Browser side, it's a pity no lightweight browser is available, all require gtk or some sort of bloated library, so i've been using chrome which is bloated anyway (100mb of memory per tab :/)... i'm doing alot of dev on the puffy beast, currently it's running bleeding edge mongodb, redis, node, python, sqlite, io, lua and nginx and a look at systat (oh i love systat) makes me really proud of OpenBSD. Only problem is flash, but i make it a point not to run flash, also webm on chrome plays with no sound. No time to waste on videos anyway. Bottom line and to stay on topic, if you can find a d420 in a good shape don't hesitate, they are well made (except a moronic problem with the three wire charger security carrier over the Dallas 2501 chip so handle plugging and unplugging with care). Well that's it, it was fun to write this up as it's been a while I wanted to write some kudos for OpenBSD
Peace Last edited by silex; 15th December 2012 at 10:03 AM. |
|
|||
dmesg on the way
I'm a geek, and well, i love geeky things. So after a few months of messing around i have put together a laptop that looks a bit like something from the movie HACKERS (1995)
I can tell you for now, my current specs are: Laptop model: Toshiba Portege 7000CT Pentium 2 @ 2.67Mhz RAM : 160MB Wifi: BWI-Airforce Driver compiled from source (WORKS PERFECTLY! Even monitor mode) modified motd using i3 as my window manager, even under intense workload, no lag whatsoever i have custom drawn keyboard keys, which i soon hope to replace with my own alphabet (i dont need a number row! just the symbols on the top row!) sorry the pictures are so big, i can shrink them in photobucket on request. dmesg: Code:
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 267 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR real mem = 167243776 (159MB) avail mem = 154509312 (147MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/28/99, BIOS32 rev. 0 @ 0xfc2c2 apm0 at bios0: Power Management spec V1.2 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1330/144 (7 entries) pcibios0: PCI Interrupt Router at 000:05:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #21 is the last bus bios0: ROM list: 0xc0000/0xc000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02 vga1 at pci0 dev 4 function 0 "Neomagic Magicgraph NM2160" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) piixpcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DKLA-24320> wd0: 16-sector PIO, LBA, 4126MB, 8452080 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11 piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMI iic0 at piixpm0 iic0: addr 0x4d 00=1d 01=28 02=80 03=00 04=07 05=7f 06=c9 07=32 08=bf words 00=1cff 01=28ff 02=80ff 03=00ff 04=07ff 05=7fff 06=c9ff 07=32ff spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL3 "Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 9 function 0 not configured cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x05: irq 11 cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x05: irq 11 "C-Cube Cinemaster" rev 0x02 at pci0 dev 13 function 0 not configured isa0 at piixpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo pckbc0 at isa0 port 0x60/5 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 midi0 at sb0: <SB MIDI UART> audio0 at sb0 opl at sb0 not configured wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4) audio1 at wss0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0 pcmcia1 at cardslot1 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (26a543fb80d13587.a) swap on wd0b dump on wd0b bwi0 at cardbus1 dev 0 function 0 "Broadcom BCM4306" rev 0x03: irq 11, address 00:0c:41:a8:fd:d6 Last edited by 0xicl33n; 21st June 2012 at 02:17 AM. Reason: dmesg added |
|
|||
Lately Dr Puffy saved the life of Miss MiniCompaq .. she seemed to suffer from cerebral palsy and fever with asphyxia .. :-)
Now she's getting a 2nd life : dmesg Code:
OpenBSD 5.2-beta (GENERIC.MP) #287: Thu Jun 21 10:20:37 MDT 2012 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF real mem = 1064562688 (1015MB) avail mem = 1036312576 (988MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 11/05/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xfc8c0 (18 entries) bios0: vendor Hewlett-Packard version "14680 Ver. F.01" date 11/05/2009 bios0: Hewlett-Packard Compaq Mini CQ10-100 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET ASF! SSDT acpi0: wakeup devices P0P2(S4) P0P1(S4) LAN2(S3) USB0(S3) USB3(S3) EUSB(S3) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 1, remapped to apid 2 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 3 (P0P1) acpiprt2 at acpi0: bus 2 (P0P5) acpiprt3 at acpi0: bus -1 (P0P6) acpiprt4 at acpi0: bus -1 (P0P7) acpiprt5 at acpi0: bus -1 (P0P8) acpiprt6 at acpi0: bus -1 (P0P9) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 100 degC acpibat0 at acpi0: BAT1 model "Primary" serial type LION oem "Hewlett-Packard" acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibtn2 at acpi0: PWRB acpivideo0 at acpi0: IGD_ acpivout0 at acpivideo0: LCD_ bios0: ROM list: 0xc0000/0xec00! cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 drm0 at inteldrm0 "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: IDT 92HD81B1X audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16 pci1 at ppb0 bus 1 "Broadcom BCM4315" rev 0x01 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17 pci2 at ppb1 bus 2 alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: msi, address 18:a9:05:e7:76:be atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1 ahci0: PHY offline on port 2 scsibus0 at ahci0: 32 targets usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston DataTraveler G2" rev 2.00/1.10 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler G2, PMAP> SCSI0 0/direct removable serial.09306545B910B32903AB sd0: 15320MB, 512 bytes/sector, 31375360 sectors uvideo0 at uhub0 port 4 configuration 1 interface 0 "importek HP Webcam-50" rev 2.00/37.12 addr 3 video0 at uvideo0 rum0 at uhub0 port 7 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 4 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 ugen0 at uhub4 port 2 "Broadcom Corp HP Bluetooth Module" rev 2.00/3.49 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (d576f35a5c13a135.a) swap on sd0b dump on sd0b Last edited by daemonfowl; 24th July 2012 at 10:54 PM. |
|
|||
Just got a shiny new HP Elitebook Folio 9470m.
Had a bit of a rough time installing, as it has no optical drive. My first attempt at installing via USB drive failed at the USB drive itself. Since my office has a FOG server, I put the ISO up there and installed via PXE/RAMDisk. The first boot after that, it couldn't find /bsd. After some investigation, it seems that bsd.tgz and etc.tgz had failed to install. Third time the charm and I've got XFCE, Firefox, and starting to install other pkgs Code:
OpenBSD 5.3 (GENERIC.MP) #51: Wed Feb 27 13:52:32 MST 2013 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS real mem = 3096952832 (2953MB) avail mem = 3035357184 (2894MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/31/11, SMBIOS rev. 2.7 @ 0xb9c3f000 (33 entries) bios0: vendor Hewlett-Packard version "68IBD Ver. F.32" date 12/05/2012 bios0: Hewlett-Packard HP EliteBook Folio 9470m acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SLIC MSDM FPDT BGRT SSDT SSDT ASF! acpi0: wakeup devices LANC(S5) EHC1(S3) EHC2(S3) XHC_(S3) PCIB(S5) RP02(S4) ECF0(S4) RP03(S4) RP04(S5) WNIC(S5) RP06(S5) NIC_(S5) RP07(S4) RP08(S4) HST1(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 99MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz ("GenuineIntel" 686-class) 1.60 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus -1 (PEGP) acpiprt1 at acpi0: bus -1 (PCIB) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP03) acpiprt4 at acpi0: bus 3 (RP04) acpiprt5 at acpi0: bus 0 (PCI0) acpiec0 at acpi0 acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpicpu2 at acpi0: C2, C1, PSS acpicpu3 at acpi0: C2, C1, PSS acpipwrres0 at acpi0: APPR acpipwrres1 at acpi0: COMP acpipwrres2 at acpi0: LPP_ acpitz0 at acpi0: critical temperature is 128 degC acpitz1 at acpi0acpitz1: GFXZ: failed to read _TMP acpitz2 at acpi0: critical temperature is 128 degC acpitz3 at acpi0: critical temperature is 128 degC acpitz4 at acpi0: critical temperature is 128 degC acpitz5 at acpi0: critical temperature is 128 degC acpitz6 at acpi0acpitz6: DM1Z: failed to read _TMP acpitz7 at acpi0acpitz7: DM2Z: failed to read _TMP acpibat0 at acpi0: BAT0 model "Primary" serial XXXX 2012/12/23 type LIon oem "Hewlett-Packard" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: LID_ acpivideo0 at acpi0: DGFX acpivideo1 at acpi0: GFX0 acpivout0 at acpivideo1: DD02 bios0: ROM list: 0xc0000/0xee00 0xcf000/0x1000 0xd0000/0x1000 cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1701, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 782 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1: apic 0 int 16 drm0 at inteldrm0 "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address XX:XX:XX:XX:XX ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: IDT/0x76e0, Intel/0x2806, using IDT/0x76e0 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 17 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 18 pci2 at ppb1 bus 2 "JMicron SD/MMC" rev 0x30 at pci2 dev 0 function 0 not configured sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x30: apic 0 int 18 sdmmc0 at sdhc0 ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 19 pci3 at ppb2 bus 3 iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev 0x24: msi, MIMO 2T2R, AGN, address c8:f7:33:92:fb:3f ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72505, GH2O> SCSI3 0/direct fixed naa.5000xxxxxxxxx sd0: 476940MB, 512 bytes/sector, 976773168 sectors ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 ugen0 at uhub2 port 1 "Validity Sensors product 0x003d" rev 1.10/1.04 addr 3 uvideo0 at uhub2 port 3 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. HP HD Webcam [Fixed]" rev 2.00/17.59 addr 4 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 urtwn0 at uhub3 port 2 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 3 urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address xx:xx:xx:xx:xx ugen1 at uhub3 port 6 "Intel product 0x07da" rev 2.00/78.69 addr 4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets |
|
|||
Quote:
|
|
|||
Doesn't seem to be synapsis based. But thanks for the heads up.
|
|
|||
Quote:
It would be easy to test by enabling a parameter (tap to click is not enabled by default) which I think you can do directly from the command line. An example is here Edit: I looked at your dmesg and the touchpad driver is not being recognized Quote:
Quote:
Last edited by shep; 28th February 2013 at 09:59 PM. |
|
|||
it had win 7 preloaded. All I did was the ol' install OBSD on a USB stick and boot from the bsd.rd on there. Didn't have any secure boot that I noticed.
|
|
|||
I have current i386 from 07 May 2013 installed on my HP EliteBook 2560p.
Almost everything work fine, except for: 1) No sound in headphones, laptop speakers work just fine; 2) Keyboard does not work after waking up from suspend; 3) Overall slowness of system (Comparing to Fedora 18, installed on the same laptop). Youtube's HTML5 videos in Firefox work, but if you make it fullscreen, or do a pause/play, sound and video start become stutter; Will update post with dmesg soon. |
|
|||
Hi guys I run a Lenovo X200 and everything works perfectly, suspend and resume, multi-media keys, wireless etc.
I am thinking of upgrading to an X230, can anyone confirm if all the issues have been resolved in 5.3? Most of the information online about this laptop seems to be pre 5.3. Maybe I should get a dell xps 13 instead? |
|
|||
Quote:
|
|
||||
Okay, I'm running a Dell Inspiron 1545, I added an atheros wireless card and all is well, very happy!
Quote:
|
|
|||
Lenovo E520 looks good
Lenovo E520 working beautifully as a desktop with OpenBSD 5.3 amd64!
Using fluxbox and cwm. Wireless not tested, since I don't use it. Code:
OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013 deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP real mem = 4201246720 (4006MB) avail mem = 4066914304 (3878MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0830 (65 entries) bios0: vendor LENOVO version "8HET41WW(1.23)" date 01/13/2012 bios0: LENOVO 1143AFU acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT SSDT ASF! HPET APIC MCFG SSDT SSDT UEFI UEFI UEFI acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S0) EHC2(S0) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) RP08(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEG2(S4) PEG3(S4) LID0(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, 2394.86 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, 2394.56 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, 2394.56 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, 2394.56 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus 8 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpicpu2 at acpi0: C3, C2, C1, PSS acpicpu3 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 120 degC acpitz1 at acpi0: critical temperature is 120 degC acpibat0 at acpi0: BAT0 model "LNV-42T4751" serial 3136 type LION oem "3131004f594e4153" acpithinkpad0 at acpi0 acpiac0 at acpi0: AC unit offline acpibtn0 at acpi0: LID0 cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 drm0 at inteldrm0 "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi azalia0: codecs: Conexant/0x506e, Intel/0x2805, using Conexant/0x506e audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 2 int 17, address f0:de:f1:cd:81:0a rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi pci3 at ppb2 bus 3 sdhc0 at pci3 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 18 sdmmc0 at sdhc0 ppb3 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb4: msi pci4 at ppb3 bus 8 ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54323, ES2O> SCSI3 0/direct fixed naa.5000cca690c0ce02 sd0: 305245MB, 512 bytes/sector, 625142448 sectors cd0 at scsibus0 targ 4 lun 0: <Optiarc, DVD RW AD-7740H, A841> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.5 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Tablet PTZ-930" rev 1.10/1.02 addr 3 uhidev0: iclass 3/1, 13 report ids ums0 at uhidev0 reportid 1: 3 buttons, Z dir wsmouse2 at ums0 mux 0 uhid0 at uhidev0 reportid 2: input=9, output=0, feature=1 uhid1 at uhidev0 reportid 3: input=0, output=0, feature=1 uhid2 at uhidev0 reportid 4: input=0, output=0, feature=1 uhid3 at uhidev0 reportid 5: input=0, output=0, feature=8 uhid4 at uhidev0 reportid 6: input=0, output=0, feature=8 uhid5 at uhidev0 reportid 7: input=0, output=0, feature=4 uhid6 at uhidev0 reportid 8: input=0, output=0, feature=4 uhid7 at uhidev0 reportid 9: input=0, output=0, feature=1 uhid8 at uhidev0 reportid 10: input=0, output=0, feature=2 uhid9 at uhidev0 reportid 11: input=0, output=0, feature=1 uhid10 at uhidev0 reportid 12: input=9, output=0, feature=0 uhid11 at uhidev0 reportid 13: input=0, output=0, feature=1 uvideo0 at uhub2 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/9.54 addr 4 video0 at uvideo0 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 ugen0 at uhub3 port 3 "UPEK TouchStrip Fingerprint Sensor" rev 1.00/0.48 addr 3 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (943cb336546143a2.a) swap on sd0b dump on sd0b
__________________
Note to self: Pillage then burn. Last edited by ahriman; 7th June 2013 at 09:55 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Your FreeBSD Laptop | vermaden | FreeBSD General | 67 | 6th June 2014 12:27 PM |
OpenBSD = Awesome Laptop OS | revzalot | OpenBSD General | 8 | 9th September 2008 07:12 AM |
Laptop Repair | DrJ | General Hardware | 4 | 25th August 2008 02:30 PM |
laptop | cw_ | FreeBSD General | 21 | 14th August 2008 02:48 AM |
Dual-boot laptop won't boot OpenBSD after upgrade to 4.3 | kbeaucha | OpenBSD Installation and Upgrading | 17 | 30th May 2008 02:40 PM |