I'm curious as to why can't I hear any sound coming from my speaker, even after doing the SOP for configuring the sound devices. The following text is my configuration:
Code:
$ cat /boot/loader.conf | grep snd_
snd_ich_load="YES"
$ kldstat | grep snd_
3 1 0xc0d30000 6f88 snd_ich.ko
$ kldstat | grep sound
4 2 0xc0d37000 4a5ac sound.ko
$ cat /var/run/dmesg.boot | grep pcm
pcm0: <Intel ICH6 (82801FB)> port 0x5000-0x50ff,0x48c0-0x48ff mem 0xb0040800-0xb00409ff,0xb0040400-0xb00404ff irq 20 at device 30.2 on pci0
pcm0: [ITHREAD]
pcm0: <Avance Logic ALC250 AC97 Codec>
$ mixer
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
Mixer speaker is currently set to 75:75
Mixer line is currently set to 75:75
Mixer mic is currently set to 0:0
Mixer cd is currently set to 75:75
Mixer rec is currently set to 0:0
Mixer igain is currently set to 0:0
Mixer ogain is currently set to 50:50
Mixer line1 is currently set to 75:75
Mixer phin is currently set to 0:0
Mixer phout is currently set to 0:0
Recording source: mic
I've tried xmms, audacious, mpg123, and bmp but I still can't hear any sound from my speaker. What could be wrong? What am I missing?