DaemonForums  

Go Back   DaemonForums > Other Operating Systems > Other BSD and UNIX/UNIX-like

Other BSD and UNIX/UNIX-like Any other flavour of BSD or UNIX that does not have a section of its own.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 2nd September 2013
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,125
Default My first Bitrig install

Just now I did a manual install of a Bitrig 0.1 current snapshot on an USB stick.

The dmesg output on a HP Proliant ML110 G6 (some very long lines have been wrapped):
Code:
Bitrig 0.1-current (GENERIC) #4: Mon Aug  5 17:39:15 MDT 2013
    root@amd64b0.bitrig.org:/usr/src/sys/arch/amd64/compile/GENERIC
    master:466ca60933b93e209e3b21ed0f903cd286d20cae
real mem = 8497266688 (8103MB)
avail mem = 8263507968 (7880MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdf010 (52 entries)
bios0: vendor HP version "O27" date 09/06/2010
bios0: HP ProLiant ML110 G6
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP TCPA SSDT SPMI EINJ HEST BERT SSDT ERST APIC MCFG HPET BOOT SPCR
acpi0: wakeup devices PEG_(S4) P0P3(S4) P0P5(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4)
  PEX5(S4) PEX6(S4) PEX7(S4) PEX8(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz, 2793.15 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,
  ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,
  xTPR,PDCM,PCID,POPCNT,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-47
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 1 (PEG_)
acpiprt1 at acpi0: bus -1 (PEG2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus 0 (PCI0)
acpiprt5 at acpi0: bus 16 (PEX1)
acpiprt6 at acpi0: bus 26 (PEX2)
acpiprt7 at acpi0: bus 28 (PEX3)
acpiprt8 at acpi0: bus 30 (PEX4)
acpiprt9 at acpi0: bus 32 (PEX5)
acpiprt10 at acpi0: bus -1 (PEX6)
acpiprt11 at acpi0: bus -1 (PEX7)
acpiprt12 at acpi0: bus -1 (PEX8)
acpiprt13 at acpi0: bus 48 (PCIB)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2793, 2660, 2527, 2394, 2261, 2128, 1995, 1862,
   1729, 1596, 1463, 1330, 1197 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0048 rev 0x18
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x0049 rev 0x18: msi
pci1 at ppb0 bus 1
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 1 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci2 at ppb1 bus 16
ppb2 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
pci3 at ppb2 bus 26
ppb3 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x05: msi
pci4 at ppb3 bus 28
vga1 at pci4 dev 0 function 0 "Matrox MGA G200e" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb4 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x05: msi
pci5 at ppb4 bus 30
bge0 at pci5 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1 (0x5784100):
  apic 1 int 19, address 98:4b:e1:10:08:6b
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
ppb5 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05: msi
pci6 at ppb5 bus 32
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 1 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci7 at ppb6 bus 48
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA, channel 0
   configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD3200AAKS-00VYA0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide0 channel 1 drive 0: <ST2000DM001-1CH164>
wd1: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd2 at pciide0 channel 1 drive 1: <ST2000DM001-1CH164>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 1 int 18
iic0 at ichiic0
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA, channel 0
  wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 1 int 17 for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <hp, DVDROM DH40N, IS00> ATAPI 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 4 configuration 1 interface 0 "NOVATEK USB MULTIMEDIA KEYBOARD" rev 1.10/1.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub2 port 4 configuration 1 interface 1 "NOVATEK USB MULTIMEDIA KEYBOARD" rev 1.10/1.10 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev2 at uhub3 port 1 configuration 1 interface 0 "ServerEngines SE USB Device" rev 1.10/0.01 addr 3
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub3 port 1 configuration 1 interface 1 "ServerEngines SE USB Device" rev 1.10/0.01 addr 3
uhidev3: iclass 3/1
ums0 at uhidev3: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub3 port 5 configuration 1 interface 0 "Kingston DataTraveler G2" rev 2.00/2.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler G2, 1.00> SCSI2 0/direct removable serial.09511624A991250C003F
sd0: 3817MB, 512 bytes/sector, 7818240 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (44a80d5abba1e0a6.a) swap on sd0b dump on sd0b
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
 

Tags
bitrig, bitrig.org

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenBSD OpenBSD forked to create Bitrig J65nko News 32 26th July 2012 07:38 AM
How - To install GNOME vile I install OpenBSD ? looop OpenBSD Installation and Upgrading 6 24th April 2010 08:58 PM


All times are GMT. The time now is 10:18 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick