DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   (View Single Post)  
Old 15th August 2009
comet--berkeley comet--berkeley is offline
Real Name: Richard
Package Pilot
 
Join Date: Apr 2009
Location: California
Posts: 163
Default OpenBSD 4.6 i386 boot hangs with old Gateway system - resolved

This problem is resolved I want to document it.

When booting 4.4, 4.5 and a recent 4.6, lots of boot configuration messages appear
and then the process just stops, hangs, freezes...

To fix the problem while booting I do this:

>boot -c
...
ukc>disable apm
ukc>quit


And to "permanently" fix the problem I alter the /bsd boot file like this:

mv /bsd /bsd.old
config -e -o /bsd /bsd.old
ukc>disable apm
ukc>quit

Here is the dmesg from a successful boot:
Code:
OpenBSD 4.6-current (GENERIC) #105: Mon Aug 10 18:02:36 MDT 2009
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 512KB L2 cache) 699 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 267874304 (255MB)
avail mem = 250736640 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/05/99, BIOS32 rev. 0 @ 0xfdab0, SMBIOS rev. 2.3 @ 0xf0920 (38 entries)
bios0: vendor American Megatrends Inc. version "0AASNP06" date 07/23/1999
bios0: Gateway "
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices PS2M(S1) PS2K(S1) PCI0(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGPB)
acpicpu0 at acpi0
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "AMD 751 System" rev 0x25
amdagp0 at pchb0
agp0 at amdagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "AMD 751 PCI-PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "NVIDIA Vanta" rev 0x15
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD 756 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "AMD 756 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured
 to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3043AT>
wd0: 16-sector PIO, LBA, 4125MB, 8448300 sectors  
wd1 at pciide0 channel 0 drive 1: <FUJITSU MPF3102AT>
wd1: 16-sector PIO, LBA, 9773MB, 20015856 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8483B, 1.02> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
amdpm0 at pci0 dev 7 function 3 "AMD 756 Power" rev 0x03
ohci0 at pci0 dev 7 function 4 "AMD 756 USB Host" rev 0x06: irq 10, version 1.0, legacy support
ral0 at pci0 dev 15 function 0 "Ralink RT2561S" rev 0x00: irq 11, address 00:14:a5:0f:72:34
ral0: MAC/BBP RT2661B, RF RT2527
"Conexant 56k Winmodem" rev 0x08 at pci0 dev 17 function 0 not configured
epic0 at pci0 dev 18 function 0 "SMC 83C170 (EPIC/100)" rev 0x08, SMC9432TX : irq 9, address 00:e0:29:31:9a:5c
qsphy0 at epic0 phy 3: QS6612 10/100 PHY, rev. 1
xl0 at pci0 dev 19 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 5, address 00:10:5a:11:16:7e
exphy0 at xl0 phy 24: 3Com internal media interface
eap0 at pci0 dev 20 function 0 "Ensoniq AudioPCI97" rev 0x08: irq 9
ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
biomask f5cd netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Kensington USB/PS2 Wheel Mouse" rev 1.10/1.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Last edited by comet--berkeley; 15th August 2009 at 04:41 PM. Reason: formatting
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
openBSD IPSEC gateway w/WINDOWS XP roadwarrior s2scott OpenBSD Security 7 13th January 2009 11:01 AM
openbsd hangs momentarily at boot bogd OpenBSD General 11 9th January 2009 02:53 PM
I386 ELF32 binary on AMD64 system can't find shared libraries Gemini FreeBSD General 0 9th December 2008 06:49 AM
FreeBSD hangs on boot Bubba_HoTep FreeBSD General 3 29th November 2008 10:25 PM
Allow i386 and amd64 to boot from extended DOS partitions lvlamb OpenBSD General 4 16th July 2008 03:24 PM


All times are GMT. The time now is 02:23 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick