|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
generating a xorg.conf when X -configure freezes OS
Hi all !
I hope I find an answer to my question : When 'X -configure' fails , I mean , it just freezes the machine (eg. iBook g3) is there some other way to generate the already working well xorg.conf file? Thanks. |
|
|||
Quote:
|
|
|||
Hi ocicat !
I thought there might be a general answer to my question regardless of dmesg and such .. Here is what happened : I have 2 iBook g3 : one 5.3 stable (X is well-shape : the one I want to generate xorg.conf for) .. the other one is running -current and now that it's upgraded to the latest snapshots (5.4 beta) , X has a bad display .. I don't want to just restore , I want to be able to compare both ibooks respective xorg.conf When there is no such /etc/xorg.conf since it's never been neede (if only there have been some automated creation of it upon install for cases like this -legacy hardware with issues- ) .. and when the command 'X -configure' freezes machine .. what's to be done? Last edited by daemonfowl; 24th July 2013 at 06:47 PM. |
|
|||
On -current , X does start but with bad display (x display is a bit risen up )
as I want to use -current this issue will always occur kern.version: Code:
kern.version=OpenBSD 5.4 (GENERIC) #26: Sun Jul 21 21:25:58 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC Code:
[ using 500484 bytes of bsd ELF symbol table ] console out [ATY,RageM3p29s]console in [keyboard] , using ADB : memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4 (GENERIC) #26: Sun Jul 21 21:25:58 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 671088640 (640MB) avail mem = 636510208 (607MB) mainbus0 at root: model PowerBook4,1 cpu0 at mainbus0: 750 (Revision 0x2215): 499 MHz: 256KB backside cache mem0 at mainbus0 spdmem0 at mem0: SDRAM non-parity PC66 spdmem1 at mem0: 512MB SDRAM non-parity PC133CL2 memc0 at mainbus0: uni-n rev 0xc0 kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00 appleagp0 at pchb0 agp0 at appleagp0: aperture at 0x0, size 0x10000000 vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00 macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0: irq 47 pgs0 at macgpio0: irq 55 "firewire-linkon" at macgpio0 not configured "gpio1" at macgpio0 not configured "gpio9" at macgpio0 not configured "extint-gpio4" at macgpio0 not configured "extint-gpio12" at macgpio0 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 tumbler0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets apm0 at adb0: battery flags 0x5, 84% charged akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic1 at kiic1 wdc0 at macobio0 offset 0x1f000 irq 19: DMA wd0 at wdc0 channel 0 drive 0: <HTS541010G9AT00> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors atapiscsi0 at wdc0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-177, 7A0A> ATAPI 5/cdrom removable wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 wi0 at macobio0 offset 0x30000 irq 57: wi0: Firmware 8.70 variant 1, address 00:30:65:20:44:96 audio0 at tumbler0 tumbler0: tas3001_init: error ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0 ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00 "Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address 00:03:93:45:ca:e2 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd root on wd0a (171d6fad7a1b0e44.a) swap on wd0b dump on wd0b Last edited by daemonfowl; 24th July 2013 at 06:45 PM. Reason: +dmesg |
|
||||
You will find the functional equivalent of a complete xorg.conf file, line-by-line, in the output of /var/log/Xorg.0.log.
Quote:
If only the X Windows System has hung, perhaps the OS is still running? If the platform is running sshd(8), if the system is still operating you can use ssh(1) from another system, conduct any analysis, kill X, etc. Quote:
I have already mentioned that the Xorg log should be of unrecognized value. |
|
|||
Quote:
Apples & oranges. |
|
|||
Quote:
If you have an xorg.conf.new it may be helpful to post it. Based on the cpu speed I scanned the wikipedia entry for ibook g3 and they indicate you should have a ati rage video card You may want to read the r128(4) page and ensure that is the video driver utilized in the device section of your xorg.conf. It may also be helpful is to look at the .xsession-errors in your home directory. I tried current on a system with an sis video card and there were error messages about openbox and xinerama (It ran fine in 5.3). Edit2: .xsession is only generated if using an x session manager ie xdm - if you are using startx exclusively you will not have one. Newer versions of Xorg can utilize entries in /etc/X11/xorg.conf.d. The advantage of this is that you can just make entries that deal with the problematic area. For example, I used the radeonhd driver on my system for a while and the only entry needed in /etc/X11/xorg.conf.d was Code:
Bear$ cat /etc/X11/xorg.conf.d/20-radeon.conf Section "Device" Identifier "RadeonCard" Driver "radeonhd" EndSection Code:
Bear$ cat /etc/X11/xorg.conf.d/20-rage128.conf Section "Device" Identifier "Rage128Card" Driver "r128" EndSection Quote:
Last edited by shep; 24th July 2013 at 11:54 PM. Reason: added entry from openbsd-x11 mailing lists, edit 2 qualified .xsession-errors |
|
|||
Thanks shep , jggimi , ocicat !!!! Sorry for being late for an output.
Code:
Do you mean that X -configure does not generate xorg.conf.new in /root or that when you startx using the newly generated file that your system fails? startx actually works but with bad shape (on current) and this applies to iBook G3 and G4 which is now running current too... 'startx' doesn't freeze OS but 'X -configure' does .. the -current X screen has now a 1.8 cm height line at the bottom. it's not a big problem but I want to ensure an akways working X as I go using current and that's why I asked wether it's possible to have previous Xorg settings working on newer version of Xorg that's been installed.I remember Reinhold's help (thanks Reinhold !) providing a working xorg.conf for iMac g3 I always face this issue : now X is working .. tomorrow not working .. how can I ensure I have it always functional while still running current ? Am I wrong thinking an old working xorg.conf file to always be used (regardlss of X version?) is a safety measure not to lose X after upgrades ? Quote:
Ibook G4 dmesg (same issue) Code:
[ using 500484 bytes of bsd ELF symbol table ] console out [ATY,Via_A]console in [keyboard] , using ADB using parent ATY,ViaParent:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4 (GENERIC) #26: Sun Jul 21 21:25:58 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 1342177280 (1280MB) avail mem = 1287766016 (1228MB) mainbus0 at root: model PowerBook6,5 cpu0 at mainbus0: 7447A (Revision 0x101): 1066 MHz: 512KB L2 cache mem0 at mainbus0 spdmem0 at mem0: no EEPROM found spdmem1 at mem0: 1GB DDR SDRAM non-parity PC2700CL2.5 memc0 at mainbus0: uni-n rev 0xd2 "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 adt0 at iic0 addr 0xae: adt7467 rev 0x71 mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 appleagp0 at pchb0 agp0 at appleagp0: aperture at 0x0, size 0x10000000 vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility 9200" rev 0x01, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x03: irq 52, address 00:0d:93:ee:95:91 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 "modem-reset" at macgpio0 offset 0x1d not configured "modem-power" at macgpio0 offset 0x1c not configured macgpio1 at macgpio0 offset 0x9: irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured dfs0 at macgpio0 offset 0x6b: speeds: 1066, 533 MHz "gpio4" at macgpio0 offset 0x1e not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets apm0 at adb0: battery flags 0x5, 0% charged piic0 at adb0 iic1 at piic0 akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 4-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8123, CA0T> ATAPI 5/cdrom removable cd0(wdc0:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci2: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci3: USB revision 1.0 uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci4: USB revision 1.0 uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <HTS421260H9AT00> wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0d:93:b3:df:b0 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd root on wd0a (5bf2d6abe0cbee49.a) swap on wd0b dump on wd0b Code:
[ 31.686] (--) no aperture driver access: only wsfb driver useable [ 31.687] (--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version 3.32) [ 31.897] X.Org X Server 1.14.1 Release Date: 2013-04-17 [ 31.897] X Protocol Version 11, Revision 0 [ 31.897] Build Operating System: OpenBSD 5.4 macppc [ 31.898] Current Operating System: OpenBSD muspelheimr.my.domain 5.4 GENERIC#26 macppc [ 31.899] Build Date: 22 July 2013 10:06:16AM [ 31.899] [ 31.899] Current version of pixman: 0.30.0 [ 31.899] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 31.899] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 31.900] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 13 11:27:28 2013 [ 32.007] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 32.044] (==) No Layout section. Using the first Screen section. [ 32.044] (==) No screen section available. Using defaults. [ 32.044] (**) |-->Screen "Default Screen Section" (0) [ 32.044] (**) | |-->Monitor "<default monitor>" [ 32.061] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 32.065] (==) Disabling SIGIO handlers for input devices [ 32.065] (==) Automatically adding devices [ 32.065] (==) Automatically enabling devices [ 32.065] (==) Not automatically adding GPU devices [ 32.289] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 32.290] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 32.290] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 32.302] (II) Loader magic: 0x1a1b010 [ 32.303] (II) Module ABI versions: [ 32.303] X.Org ANSI C Emulation: 0.4 [ 32.303] X.Org Video Driver: 14.1 [ 32.303] X.Org XInput driver : 19.1 [ 32.303] X.Org Server Extension : 7.0 [ 32.310] Initializing built-in extension Generic Event Extension [ 32.310] Initializing built-in extension SHAPE [ 32.311] Initializing built-in extension MIT-SHM [ 32.311] Initializing built-in extension XInputExtension [ 32.311] Initializing built-in extension XTEST [ 32.311] Initializing built-in extension BIG-REQUESTS [ 32.311] Initializing built-in extension SYNC [ 32.311] Initializing built-in extension XKEYBOARD [ 32.311] Initializing built-in extension XC-MISC [ 32.311] Initializing built-in extension SECURITY [ 32.311] Initializing built-in extension XINERAMA [ 32.311] Initializing built-in extension XFIXES [ 32.311] Initializing built-in extension RENDER [ 32.311] Initializing built-in extension RANDR [ 32.311] Initializing built-in extension COMPOSITE [ 32.311] Initializing built-in extension DAMAGE [ 32.312] Initializing built-in extension MIT-SCREEN-SAVER [ 32.312] Initializing built-in extension DOUBLE-BUFFER [ 32.312] Initializing built-in extension RECORD [ 32.312] Initializing built-in extension DPMS [ 32.312] Initializing built-in extension X-Resource [ 32.312] Initializing built-in extension XVideo [ 32.312] Initializing built-in extension XVideo-MotionCompensation [ 32.313] Initializing built-in extension XFree86-VidModeExtension [ 32.313] Initializing built-in extension XFree86-DGA [ 32.313] Initializing built-in extension XFree86-DRI [ 32.313] Initializing built-in extension DRI2 [ 32.313] (II) LoadModule: "glx" [ 32.358] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 32.400] (II) Module glx: vendor="X.Org Foundation" [ 32.400] compiled for 1.14.1, module version = 1.0.0 [ 32.400] ABI class: X.Org Server Extension, version 7.0 [ 32.400] (==) AIGLX enabled [ 32.401] Loading extension GLX [ 32.401] (==) Matched wsfb as autoconfigured driver 0 [ 32.401] (==) Assigned the driver to the xf86ConfigLayout [ 32.401] (II) LoadModule: "wsfb" [ 32.403] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so [ 32.423] (II) Module wsfb: vendor="X.Org Foundation" [ 32.424] compiled for 1.14.1, module version = 0.4.1 [ 32.424] ABI class: X.Org Video Driver, version 14.1 [ 32.424] (II) wsfb: driver for wsdisplay framebuffer: wsfb [ 32.424] (WW) Falling back to old probe method for wsfb [ 32.434] (II) wsfb(0): using default device [ 32.437] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 32.437] (II) wsfb(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 8/8 [ 32.437] (==) wsfb(0): Depth 8, (==) framebuffer bpp 8 [ 32.437] (==) wsfb(0): Default visual is PseudoColor [ 32.441] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0) [ 32.441] (II) wsfb(0): Vidmem: 768k [ 32.441] (==) wsfb(0): DPI set to (96, 96) [ 32.441] (**) wsfb(0): Using "Shadow Framebuffer" [ 32.441] (II) Loading sub module "shadow" [ 32.441] (II) LoadModule: "shadow" [ 32.459] (II) Loading /usr/X11R6/lib/modules/libshadow.so [ 32.480] (II) Module shadow: vendor="X.Org Foundation" [ 32.480] compiled for 1.14.1, module version = 1.1.0 [ 32.480] ABI class: X.Org ANSI C Emulation, version 0.4 [ 32.480] (II) Loading sub module "fb" [ 32.480] (II) LoadModule: "fb" [ 32.483] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 32.502] (II) Module fb: vendor="X.Org Foundation" [ 32.502] compiled for 1.14.1, module version = 1.0.0 [ 32.502] ABI class: X.Org ANSI C Emulation, version 0.4 [ 32.573] (==) wsfb(0): Backing store disabled [ 32.610] (==) RandR enabled [ 33.349] (II) AIGLX: Screen 0 is not DRI2 capable [ 33.350] (II) AIGLX: Screen 0 is not DRI capable [ 33.351] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found) [ 33.720] (II) AIGLX: Loaded and initialized swrast [ 33.720] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 35.643] (II) config/wscons: checking input device /dev/wskbd [ 35.643] (II) wskbd: using layout us [ 35.643] (II) wskbd: using model macintosh [ 35.644] (II) LoadModule: "kbd" [ 35.647] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 35.674] (II) Module kbd: vendor="X.Org Foundation" [ 35.674] compiled for 1.14.1, module version = 1.7.0 [ 35.674] Module class: X.Org XInput Driver [ 35.674] ABI class: X.Org XInput driver, version 19.1 [ 35.674] (II) Using input driver 'kbd' for '/dev/wskbd' [ 35.674] (**) /dev/wskbd: always reports core events [ 35.674] (**) /dev/wskbd: always reports core events [ 35.675] (**) Option "Protocol" "standard" [ 35.675] (**) Option "XkbRules" "base" [ 35.675] (**) Option "XkbModel" "macintosh" [ 35.675] (**) Option "XkbLayout" "us" [ 35.675] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 35.946] (II) config/wscons: checking input device /dev/wsmouse [ 35.947] (II) LoadModule: "ws" [ 35.950] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 36.000] (II) Module ws: vendor="X.Org Foundation" [ 36.000] compiled for 1.14.1, module version = 1.3.0 [ 36.000] Module class: X.Org XInput Driver [ 36.000] ABI class: X.Org XInput driver, version 19.1 [ 36.001] (II) Using input driver 'ws' for '/dev/wsmouse' [ 36.001] (**) /dev/wsmouse: always reports core events [ 36.001] (II) ws: /dev/wsmouse: debuglevel 0 [ 36.001] (**) Option "Device" "/dev/wsmouse" [ 36.001] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 36.001] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 36.001] (**) ws: /dev/wsmouse: associated screen: 0 [ 36.002] (II) ws: /dev/wsmouse: minimum x position: 0 [ 36.002] (II) ws: /dev/wsmouse: maximum x position: 1023 [ 36.002] (II) ws: /dev/wsmouse: minimum y position: 0 [ 36.002] (II) ws: /dev/wsmouse: maximum y position: 767 [ 36.002] (==) ws: /dev/wsmouse: Buttons: 7 [ 36.002] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 36.003] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7) [ 36.004] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 36.004] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 36.004] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 36.004] (**) /dev/wsmouse: (accel) acceleration threshold: 4 Code:
[ 536.138] (--) no aperture driver access: only wsfb driver useable [ 536.139] (--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version 3.32) [ 536.176] X.Org X Server 1.14.1 Release Date: 2013-04-17 [ 536.177] X Protocol Version 11, Revision 0 [ 536.177] Build Operating System: OpenBSD 5.4 macppc [ 536.177] Current Operating System: OpenBSD muspelheimr.my.domain 5.4 GENERIC#26 macppc [ 536.178] Build Date: 22 July 2013 10:06:16AM [ 536.178] [ 536.178] Current version of pixman: 0.30.0 [ 536.178] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 536.178] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 536.179] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 13 11:21:36 2013 [ 536.181] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 536.182] (==) No Layout section. Using the first Screen section. [ 536.182] (==) No screen section available. Using defaults. [ 536.182] (**) |-->Screen "Default Screen Section" (0) [ 536.182] (**) | |-->Monitor "<default monitor>" [ 536.183] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 536.184] (==) Disabling SIGIO handlers for input devices [ 536.184] (==) Automatically adding devices [ 536.184] (==) Automatically enabling devices [ 536.184] (==) Not automatically adding GPU devices [ 536.184] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 536.185] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 536.185] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 536.185] (II) Loader magic: 0x1a1b010 [ 536.185] (II) Module ABI versions: [ 536.185] X.Org ANSI C Emulation: 0.4 [ 536.185] X.Org Video Driver: 14.1 [ 536.185] X.Org XInput driver : 19.1 [ 536.185] X.Org Server Extension : 7.0 [ 536.186] Initializing built-in extension Generic Event Extension [ 536.186] Initializing built-in extension SHAPE [ 536.186] Initializing built-in extension MIT-SHM [ 536.186] Initializing built-in extension XInputExtension [ 536.186] Initializing built-in extension XTEST [ 536.186] Initializing built-in extension BIG-REQUESTS [ 536.186] Initializing built-in extension SYNC [ 536.186] Initializing built-in extension XKEYBOARD [ 536.186] Initializing built-in extension XC-MISC [ 536.186] Initializing built-in extension SECURITY [ 536.186] Initializing built-in extension XINERAMA [ 536.186] Initializing built-in extension XFIXES [ 536.186] Initializing built-in extension RENDER [ 536.186] Initializing built-in extension RANDR [ 536.187] Initializing built-in extension COMPOSITE [ 536.187] Initializing built-in extension DAMAGE [ 536.187] Initializing built-in extension MIT-SCREEN-SAVER [ 536.187] Initializing built-in extension DOUBLE-BUFFER [ 536.187] Initializing built-in extension RECORD [ 536.187] Initializing built-in extension DPMS [ 536.187] Initializing built-in extension X-Resource [ 536.187] Initializing built-in extension XVideo [ 536.188] Initializing built-in extension XVideo-MotionCompensation [ 536.188] Initializing built-in extension XFree86-VidModeExtension [ 536.188] Initializing built-in extension XFree86-DGA [ 536.188] Initializing built-in extension XFree86-DRI [ 536.188] Initializing built-in extension DRI2 [ 536.188] (II) LoadModule: "glx" [ 536.191] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 536.193] (II) Module glx: vendor="X.Org Foundation" [ 536.193] compiled for 1.14.1, module version = 1.0.0 [ 536.193] ABI class: X.Org Server Extension, version 7.0 [ 536.193] (==) AIGLX enabled [ 536.193] Loading extension GLX [ 536.194] (==) Matched wsfb as autoconfigured driver 0 [ 536.194] (==) Assigned the driver to the xf86ConfigLayout [ 536.194] (II) LoadModule: "wsfb" [ 536.195] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so [ 536.196] (II) Module wsfb: vendor="X.Org Foundation" [ 536.196] compiled for 1.14.1, module version = 0.4.1 [ 536.196] ABI class: X.Org Video Driver, version 14.1 [ 536.197] (II) wsfb: driver for wsdisplay framebuffer: wsfb [ 536.197] (WW) Falling back to old probe method for wsfb [ 536.199] (II) wsfb(0): using default device [ 536.199] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 536.200] (II) wsfb(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 8/8 [ 536.200] (==) wsfb(0): Depth 8, (==) framebuffer bpp 8 [ 536.200] (==) wsfb(0): Default visual is PseudoColor [ 536.200] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0) [ 536.200] (II) wsfb(0): Vidmem: 768k [ 536.201] (==) wsfb(0): DPI set to (96, 96) [ 536.201] (**) wsfb(0): Using "Shadow Framebuffer" [ 536.201] (II) Loading sub module "shadow" [ 536.201] (II) LoadModule: "shadow" [ 536.204] (II) Loading /usr/X11R6/lib/modules/libshadow.so [ 536.206] (II) Module shadow: vendor="X.Org Foundation" [ 536.206] compiled for 1.14.1, module version = 1.1.0 [ 536.206] ABI class: X.Org ANSI C Emulation, version 0.4 [ 536.206] (II) Loading sub module "fb" [ 536.206] (II) LoadModule: "fb" [ 536.209] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 536.212] (II) Module fb: vendor="X.Org Foundation" [ 536.212] compiled for 1.14.1, module version = 1.0.0 [ 536.212] ABI class: X.Org ANSI C Emulation, version 0.4 [ 536.222] (==) wsfb(0): Backing store disabled [ 536.223] (==) RandR enabled [ 536.912] (II) AIGLX: Screen 0 is not DRI2 capable [ 536.913] (II) AIGLX: Screen 0 is not DRI capable [ 536.913] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/swrastg_dri.so failed (File not found) [ 536.955] (II) AIGLX: Loaded and initialized swrast [ 536.955] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 537.997] (II) config/wscons: checking input device /dev/wskbd [ 537.997] (II) wskbd: using layout us [ 537.997] (II) wskbd: using model macintosh [ 537.997] (II) LoadModule: "kbd" [ 538.000] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 538.002] (II) Module kbd: vendor="X.Org Foundation" [ 538.002] compiled for 1.14.1, module version = 1.7.0 [ 538.002] Module class: X.Org XInput Driver [ 538.002] ABI class: X.Org XInput driver, version 19.1 [ 538.002] (II) Using input driver 'kbd' for '/dev/wskbd' [ 538.002] (**) /dev/wskbd: always reports core events [ 538.002] (**) /dev/wskbd: always reports core events [ 538.002] (**) Option "Protocol" "standard" [ 538.003] (**) Option "XkbRules" "base" [ 538.003] (**) Option "XkbModel" "macintosh" [ 538.003] (**) Option "XkbLayout" "us" [ 538.003] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 538.177] (II) config/wscons: checking input device /dev/wsmouse [ 538.177] (II) LoadModule: "ws" [ 538.180] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 538.182] (II) Module ws: vendor="X.Org Foundation" [ 538.182] compiled for 1.14.1, module version = 1.3.0 [ 538.182] Module class: X.Org XInput Driver [ 538.182] ABI class: X.Org XInput driver, version 19.1 [ 538.182] (II) Using input driver 'ws' for '/dev/wsmouse' [ 538.182] (**) /dev/wsmouse: always reports core events [ 538.182] (II) ws: /dev/wsmouse: debuglevel 0 [ 538.182] (**) Option "Device" "/dev/wsmouse" [ 538.183] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 538.183] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 538.183] (**) ws: /dev/wsmouse: associated screen: 0 [ 538.183] (II) ws: /dev/wsmouse: minimum x position: 0 [ 538.183] (II) ws: /dev/wsmouse: maximum x position: 1023 [ 538.183] (II) ws: /dev/wsmouse: minimum y position: 0 [ 538.183] (II) ws: /dev/wsmouse: maximum y position: 767 [ 538.183] (==) ws: /dev/wsmouse: Buttons: 7 [ 538.184] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 538.184] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7) [ 538.185] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 538.185] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 538.185] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 538.185] (**) /dev/wsmouse: (accel) acceleration threshold: 4 [ 850.428] (II) UnloadModule: "ws" [ 850.429] (II) UnloadModule: "kbd" [ 850.710] Server terminated successfully (0). Closing log file. |
|
|||
Thank you jggimi !
Quote:
dmseg: Code:
ot on wd0a (b8a080a7f444897f.a) swap on wd0b dump on wd0b rum0 detached uhidev2 at uhub0 port 2 configuration 1 interface 0 "vendor 0x1b1a USB Mouse" rev 1.10/1.10 addr 3 uhidev2: iclass 3/1 ums0 at uhidev2: 3 buttons, Z dir wsmouse0 at ums0 mux 0 wsmouse0 detached ums0 detached uhidev2 detached umass0 at uhub0 port 2 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/2.00 addr 3 umass0: using SCSI over Bulk-Only scsibus4 at umass0: 2 targets, initiator 0 sd0 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable serial.0951160300000000022B sd0: 953MB, 512 bytes/sector, 1952768 sectors sd0 detached scsibus4 detached umass0 detached rum0 at uhub0 port 2 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e syncing disks... done [ using 500456 bytes of bsd ELF symbol table ] console out [ATY,RagePro_C]console in [keyboard] USB and ADB found, using ADB : memaddr 81000000 size 1000000, : consaddr 81000000, : ioaddr 80881000, size 1000: memtag 9000, iotag 9000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4 (GENERIC) #29: Thu Jul 25 18:56:24 MDT 2013 deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 402653184 (384MB) avail mem = 378896384 (361MB) mainbus0 at root: model iMac,1 cpu0 at mainbus0: 750 (Revision 0x8202): 333 MHz: 512KB backside cache mem0 at mainbus0 mpcpcibr0 at mainbus0 pci: grackle pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 0 function 0 "Motorola MPC106 PCI" rev 0x40 macobio0 at pci0 dev 16 function 0 "Apple Paddington" rev 0x00 macintr0 at macobio0 offset 0x10 mesh0 at macobio0 offset 0x10000 irq 12: 50MHz scsibus0 at mesh0: 8 targets, initiator 7 "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 awacs0 at macobio0 offset 0x14000: irq 17,8,9 headphones audio0 at awacs0 "fdc" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000: irq 18, via-cuda, 0 targets wdc0 at macobio0 offset 0x20000 irq 13: DMA wd0 at wdc0 channel 0 drive 0: <ST320011A> wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors wd0(wdc0:0:0): using BIOS timings, DMA mode 2 wdc1 at macobio0 offset 0x21000 irq 14: DMA atapiscsi0 at wdc1 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <LG, CD-ROM CRN-8241B, LAD4> ATAPI 5/cdrom removable cd0(wdc1:0:0): using BIOS timings, DMA mode 2 bm0 at macobio0 offset 0x11000 irq 42,33: address 00:50:e4:99:89:75 lxtphy0 at bm0 phy 0: LXT970 10/100 PHY, rev. 3 "nvram" at macobio0 offset 0x60000 not configured vgafb0 at pci0 dev 18 function 0 "ATI Mach64" rev 0x5c, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) ohci0 at pci0 dev 20 function 0 "AT&T/Lucent USB" rev 0x12: irq 28, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "AT&T/Lucent OHCI root hub" rev 1.00/1.00 addr 1 uhidev0 at uhub0 port 1 configuration 1 interface 0 "USB USB Keykoard" rev 1.10/1.10 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 uhidev1 at uhub0 port 1 configuration 1 interface 1 "USB USB Keykoard" rev 1.10/1.10 addr 2 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 rum0 at uhub0 port 2 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootpath: /pci/mac-io/ide@20000/disk@0:/bsd root on wd0a (b8a080a7f444897f.a) swap on wd0b dump on wd0b |
|
|||
sorry to vex anyone but my problem is : neither do I have a Xorg.conf.new to edit .. nor does my Xorg.0.log contain a Device Section where I should go & edit....
Last edited by daemonfowl; 29th July 2013 at 10:10 PM. |
|
|||
Xorg.0.log for iMac :
Code:
[ 435.988] (--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version 3.32) [ 436.160] X.Org X Server 1.14.1 Release Date: 2013-04-17 [ 436.160] X Protocol Version 11, Revision 0 [ 436.160] Build Operating System: OpenBSD 5.4 macppc [ 436.161] Current Operating System: OpenBSD jupiterstation.my.domain 5.4 GENERIC#29 macppc [ 436.163] Build Date: 22 July 2013 10:06:16AM [ 436.163] [ 436.163] Current version of pixman: 0.30.0 [ 436.163] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 436.163] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 436.165] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 30 03:42:31 2013 [ 436.211] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 436.217] (==) No Layout section. Using the first Screen section. [ 436.217] (==) No screen section available. Using defaults. [ 436.217] (**) |-->Screen "Default Screen Section" (0) [ 436.218] (**) | |-->Monitor "<default monitor>" [ 436.226] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 436.239] (==) Disabling SIGIO handlers for input devices [ 436.239] (==) Automatically adding devices [ 436.239] (==) Automatically enabling devices [ 436.239] (==) Not automatically adding GPU devices [ 436.251] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 436.251] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 436.251] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 436.252] (II) Loader magic: 0x1a1b010 [ 436.253] (II) Module ABI versions: [ 436.253] X.Org ANSI C Emulation: 0.4 [ 436.253] X.Org Video Driver: 14.1 [ 436.253] X.Org XInput driver : 19.1 [ 436.253] X.Org Server Extension : 7.0 [ 436.259] (--) PCI:*(0:0:18:0) 1002:4750:0000:0000 rev 92, Mem @ 0x81000000/16777216, 0x80881000/4096, I/O @ 0x00000c00/256 [ 436.261] Initializing built-in extension Generic Event Extension [ 436.261] Initializing built-in extension SHAPE [ 436.261] Initializing built-in extension MIT-SHM [ 436.261] Initializing built-in extension XInputExtension [ 436.261] Initializing built-in extension XTEST [ 436.261] Initializing built-in extension BIG-REQUESTS [ 436.262] Initializing built-in extension SYNC [ 436.262] Initializing built-in extension XKEYBOARD [ 436.262] Initializing built-in extension XC-MISC [ 436.262] Initializing built-in extension SECURITY [ 436.262] Initializing built-in extension XINERAMA [ 436.262] Initializing built-in extension XFIXES [ 436.262] Initializing built-in extension RENDER [ 436.262] Initializing built-in extension RANDR [ 436.263] Initializing built-in extension COMPOSITE [ 436.263] Initializing built-in extension DAMAGE [ 436.263] Initializing built-in extension MIT-SCREEN-SAVER [ 436.263] Initializing built-in extension DOUBLE-BUFFER [ 436.263] Initializing built-in extension RECORD [ 436.264] Initializing built-in extension DPMS [ 436.264] Initializing built-in extension X-Resource [ 436.264] Initializing built-in extension XVideo [ 436.264] Initializing built-in extension XVideo-MotionCompensation [ 436.265] Initializing built-in extension XFree86-VidModeExtension [ 436.265] Initializing built-in extension XFree86-DGA [ 436.265] Initializing built-in extension XFree86-DRI [ 436.265] Initializing built-in extension DRI2 [ 436.266] (II) LoadModule: "glx" [ 436.270] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 436.344] (II) Module glx: vendor="X.Org Foundation" [ 436.344] compiled for 1.12.3, module version = 1.0.0 [ 436.344] ABI class: X.Org Server Extension, version 6.0 [ 436.345] (EE) module ABI major version (6) doesn't match the server's version (7) [ 436.345] (II) UnloadModule: "glx" [ 436.345] (II) Unloading glx [ 436.349] (EE) Failed to load module "glx" (module requirement mismatch, 0) [ 436.350] (==) Matched ati as autoconfigured driver 0 [ 436.350] (==) Assigned the driver to the xf86ConfigLayout [ 436.350] (II) LoadModule: "ati" [ 436.351] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so [ 436.359] (II) Module ati: vendor="X.Org Foundation" [ 436.359] compiled for 1.12.3, module version = 6.14.6 [ 436.359] Module class: X.Org Video Driver [ 436.359] ABI class: X.Org Video Driver, version 12.0 [ 436.359] (EE) module ABI major version (12) doesn't match the server's version (14) [ 436.359] (II) UnloadModule: "ati" [ 436.360] (II) Unloading ati [ 436.360] (EE) Failed to load module "ati" (module requirement mismatch, 0) [ 436.360] (EE) No drivers available. [ 436.360] Fatal server error: [ 436.360] no screens found [ 436.361] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 436.361] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 436.361] (EE) [ 436.379] Server terminated with error (1). Closing log file. |
|
|||
http://ftp.openbsd.org/pub/OpenBSD/s...INSTALL.macppc
Quote:
# cat dmesg | grep ATI Code:
vgafb0 at pci0 dev 18 function 0 "ATI Mach64" rev 0x5c, mmio |
|
||||
Quote:
And shep posted something you could use. Or maybe you could find some interest in this xorg.conf
__________________
ThinkPad W500 P8700 6GB HD3650 - faultry ThinkStation P700 2x2620v3 32GB 1050ti 3xSSD 1xHDD |
|
|||
Hi LeFrettchen & thanks for trying to help.I've been playing with many xorg.conf cocktails but nothing worked .. server's versions &/or module requirement mismatches etc etc and it's hard for an simple user to quickly find the right settings.
(all in all : for iBooks g3/g4 OpenBSD 5.3 stable is fine but -current has a slight issue in display .. for iMac g3 X server fails both on 5.3 stable and on -current) |
|
|||
The version of X,org in 5.4 current is new enough that most configuration should be done automagically.
The advantage I alluded to is that using an /etc/xorg.conf.d is that you can override the automagic configuration one element at at time. When you try to use the older xorg.conf, the entire configuration has to to be both correct and complete. Commonly, it will indicate that screens are not configured. If you use an xorg.conf.d, which is a directory and not a file, is that you can just change just the video driver. As in the example the rage128 driver over rides and leave the system to set up the input devices, screens, modules and fonts. The same short entry would also be where you could add the options for NoAccell and turn off the framebuffer. From the Arch Linux wiki Quote:
Last edited by shep; 30th July 2013 at 02:13 AM. |
|
|||
Another resource is this page with various xorg.conf files for Mac's running linux.
http://mac.linux.be/content/xorgconf-files The value is that you can just take the device section and put it into the /etc/xorg.conf.d directory using the rules from the Arch wiki. The Busi id's, device drivers and monitor settings will not change. Since is it possible to damage a monitor, at least the older CRT's, with incorrect monitor settings, I would recommend that you try just device entries in the /etc/xorg.conf.d directory using the Arch linux naming conventions. For example For a 500mhz ibook g3 copy the device entry into /etc/xorg.conf.d/20-r128.conf Code:
Section “Device” Identifier “Video” Driver “r128″ BusID “PCI:0:16:0″ Option “PanelWidth” “1024″ Option “PanelHeight” “768″ Option “UseFBDev” “true” Option “NoInt10″ “true” EndSection Last edited by shep; 30th July 2013 at 02:27 AM. |
|
|||
Million thanks shep !!
I'd like to ask you about naming convention for file(s) to be put in xorg.conf.d directory .. |
|
||||
daemonfowl, your "working" X.org logs showed you were in framebuffer mode, and you've described the problem as "X has a bad display". I don't know what your symptoms are, since you never described them. As FAQ 11.2.10 states, and as I quoted above, in framebuffer mode resolution must be managed from MacOS.
The X.Org errors you are seing, "module requirement mismatch," are rare with OpenBSD. They occur when X.Org code modules are not in sync with each other.
Last edited by jggimi; 30th July 2013 at 03:06 PM. Reason: clarity |
|
||||
Quote:
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
xorg.conf doesn't exist & I want to keep record of my working Xorg setting | daemonfowl | OpenBSD General | 14 | 28th August 2012 01:13 AM |
xorg.conf with 1440x900 | openBSDheart | OpenBSD General | 8 | 12th June 2012 07:06 PM |
xorg.conf is not necessary ? | sw2wolf | OpenBSD General | 5 | 1st June 2012 02:42 AM |
xorg.conf overriden? | delboy | FreeBSD General | 4 | 3rd February 2010 10:37 AM |
Xorg freezes 7.0 | PatrickBaer | FreeBSD General | 2 | 14th June 2008 09:41 AM |