DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 17th July 2008
Hihihi Hihihi is offline
New User
 
Join Date: Jul 2008
Posts: 4
Thanked 0 Times in 0 Posts
Default Xorg very slow (problem with DRI?)

HI all,
my last problem is, with using Xorg. I have configured Xorg and it works! but all very slow (like in vga driver). In log, i see only problem with DRI. What can i do?

Thanks for help,
I will back to use openbsd,

-xorg.0.log-
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.3 i386
Current Operating System: OpenBSD big.laptop 4.3 GENERIC#698 i386
Build Date: 07 March 2008 07:40:46PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 19 00:13:25 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "lcd"
(**) | |-->Device "sis"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/Speedo/,
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
(==) RgbPath set to "/usr/X11R6/share/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Loader magic: 0x3c01c4e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on openbsd
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
...
(II) PCI: 01:00:0: chip 1039,6300 card 1584,5002 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xcfc00000 - 0xdfcfffff (0x10100000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:3:0), (0,2,2), BCTRL: 0x07c0 (VGA_EN is cleared)
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd0000000/27, 0xdfee0000/17, I/O @ 0xac80/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
...
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E
...
[12] -1 0 0x0000ac80 - 0x0000acff (0x80) IX[B](B)
(II) PCI Memory resource overlap reduced 0xdffe0000 from 0xdfffffff to 0xdffeffff
(II) PCI Memory resource overlap reduced 0xdffc0000 from 0xdfffffff to 0xdffcffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E
...
[12] -1 0 0x0000ac80 - 0x0000acff (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
...
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
...
[18] -1 0 0x0000ac80 - 0x0000acff (0x80) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.7.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS630/730 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
...
[18] -1 0 0x0000ac80 - 0x0000acff (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
...
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.4.0.90)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xAC80
(==) SIS(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(**) SIS(0): Depth 16, (--) framebuffer bpp 16
(==) SIS(0): RGB weight 565
(==) SIS(0): Default visual is TrueColor
(--) SIS(0): Video BIOS version "2.02.1c" found (old SiS data layout)
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is disabled
(==) SIS(0): TurboQueue enabled
(==) SIS(0): Hotkey display switching is disabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): Shared Memory Area is on DIMM0
(--) SIS(0): DRAM type: SDR SDRAM
(--) SIS(0): Memory clock: 133.634 MHz
(--) SIS(0): (Adapter assumes MCLK being 133 Mhz)
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xD0000000
(--) SIS(0): MMIO registers at 0xDFEE0000 (size 64K)
(--) SIS(0): VideoRAM: 8192 KB
(II) SIS(0): Using 4096K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(--) SIS(0): Detected LVDS transmitter (External chip ID 4)
(--) SIS(0): Detected Chrontel 7005 TV encoder (ID 0x3a; chip ID 4)
(--) SIS(0): Chrontel: No TV detected.
(--) SIS(0): No CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1024x768, 14, non-exp., RGB18 [e2e9ff])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(--) SIS(0): CRT2 gamma correction not supported by hardware
(--) SIS(0): Memory bandwidth at 16 bpp is 534.536 MHz
(--) SIS(0): Detected LCD PanelDelayCompensation 0x20
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(--) SIS(0): CRT2 DDC probing failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 270 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Correcting bogus CRT2 monitor HSync range
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): lcd: Using hsync range of 30.00-80.00 kHz
(II) SIS(0): lcd: Using vrefresh range of 50.00-90.00 Hz
(II) SIS(0): Clock range: 10.00 to 270.00 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
...
(II) SIS(0): Not using default mode "1360x1024" (unknown reason)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 94.5 MHz, 68.7 kHz, 85.0 Hz)
(**) SIS(0): Default mode "1024x768" (1024x768) (For CRT device: 78.7 MHz, 60.0 kHz, 75.0 Hz)
(**) SIS(0): Default mode "1024x768" (1024x768) (For CRT device: 75.2 MHz, 56.6 kHz, 70.2 Hz)
(**) SIS(0): Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): Default mode "1024x768" (1024x768) (For CRT device: 44.9 MHz, 35.5 kHz, 86.8 Hz (I))
(**) SIS(0): Default mode "800x600" (800x600) (For CRT device: 56.2 MHz, 53.7 kHz, 85.1 Hz)
...
(**) SIS(0): Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) SIS(0): 2D acceleration enabled
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdfee0000 - 0xdfefffff (0x20000) MX[B]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
...
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) SIS(0): initializing int10
(==) SIS(0): Write-combining range (0xa0000,0x20000) was already clear
(==) SIS(0): Write-combining range (0xc0000,0x40000) was already clear
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(==) SIS(0): Write-combining range (0x0,0x1000) was already clear
(==) SIS(0): Write-combining range (0x0,0x1000) was already clear
(==) SIS(0): Write-combining range (0x0,0x1000) was already clear
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 8192 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 630
(II) SIS(0): VESA VBE OEM Product Rev: 2.02.1c
(==) SIS(0): Write-combining range (0xdfee0000,0x10000) was already clear
(==) SIS(0): Write-combining range (0xd0000000,0x800000)
(==) SIS(0): Write-combining range (0x0,0x2000) was already clear
(==) SIS(0): Write-combining range (0x0,0x2000) was already clear
(==) SIS(0): Write-combining range (0x0,0x2000) was already clear
(II) SIS(0): Setting standard mode 0x4a
(==) SIS(0): Write-combining range (0x0,0x2000) was already clear
(==) SIS(0): Write-combining range (0x0,0x2000) was already clear
(II) SIS(0): Framebuffer from (0,0) to (1023,2045)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): Checked libc memcpy()... 5385129
(--) SIS(0): Checked built-in-1 memcpy()... 4622784
(--) SIS(0): Checked built-in-2 memcpy()... 11768189
(--) SIS(0): Checked MMX memcpy()... 4705515
(--) SIS(0): Checked MMX2 memcpy()... 3687288
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/wsmouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "XkbVariant" "de"
(**) Keyboard1: XkbVariant: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Reply With Quote
  #2   (View Single Post)  
Old 18th July 2008
davidgurvich davidgurvich is offline
Fdisk Soldier
 
Join Date: May 2008
Location: NYC
Posts: 57
Thanked 3 Times in 3 Posts
Default

It looks like you haven't loaded the kernel driver for your video card. You may want to post details of your system such as what video card you have, what modules you have loaded (perhaps look in /boot/loader.conf).
Reply With Quote
  #3   (View Single Post)  
Old 18th July 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

OpenBSD 4.3 didn't officially support DRM/DRI, an early version of oga@'s work is included... but you have to recompile both the kernel *and* xenocara.

As for the slowness you're seeing, DRI typically accelerates "3D" graphics, 2D graphics are handled by the Xorg driver, (SIS) in this case.

Here is the man page, which, sadly conflicts with a SiS Ethernet chipset:
$ man -M /usr/X11R6/man sis
I don't see anything that may better your situation though, apologies.
Reply With Quote
  #4   (View Single Post)  
Old 18th July 2008
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,830
Thanked 214 Times in 189 Posts
Default

The man page is ugly; ascii output looks like it's binary. I've run it through groff and made a pdf of it which I have attached.
Attached Files
File Type: pdf sis.pdf (22.0 KB, 28 views)
Reply With Quote
  #5   (View Single Post)  
Old 18th July 2008
Hihihi Hihihi is offline
New User
 
Join Date: Jul 2008
Posts: 4
Thanked 0 Times in 0 Posts
Default

Thanks all.
I think, something is wrong with DRI. Should i build a Xenocara?
Is another reason to install DRI?

Last edited by Hihihi; 18th July 2008 at 03:54 PM.
Reply With Quote
  #6   (View Single Post)  
Old 18th July 2008
BSDfan666 BSDfan666 is offline
Real Name: N/A, this is the interweb.
Helpful companion
 
Join Date: Apr 2008
Location: Ontario, Canada
Posts: 2,223
Thanked 193 Times in 184 Posts
Default

No, it's not related to DRI.. the warning message is normal and is present in everyones Xorg log.

Recompiling your kernel for DRM and Xenocara for DRI will not likely improve anything... With the state of the work, It will likely crash anyway.

This was already made clear above...
Reply With Quote
  #7   (View Single Post)  
Old 18th July 2008
lvlamb's Avatar
lvlamb lvlamb is offline
Real Name: Louis V. Lambrecht
Spam Deminer
 
Join Date: May 2008
Location: .be
Posts: 221
Thanked 25 Times in 24 Posts
Default

I use Matrox mga multi-monitors so:
- no DRI
- no XRandR
- no compiz and other CPU/memory hogs.

What I want is to have my bktr TV on any monitor I wish.
Xenocara fills the bill, for FreeBSD have to compile an older mga driver.
All Linuces only accept the primary display.

Fwiw: rdesktop or qemu full screen (ctrl+alt+f) sends the app to the primary display also. That's where I have my panels and menus.
__________________
da more I know I know I know nuttin'
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Xorg very slow with GM965 Carpetsmoker OpenBSD General 2 12th September 2009 09:32 AM
FreeBSD 7.1 Ati Xpress 200M Xorg 7.4 problem raduenea FreeBSD Installation and Upgrading 11 1st July 2009 12:46 AM
Xorg + Xfce4 resolution problem sniper007 FreeBSD General 4 30th April 2009 04:38 PM
4.4 on macmini ppc xorg problem gosha OpenBSD Installation and Upgrading 27 14th February 2009 10:06 PM
Need to use full path to commands and xorg.config problem phreud FreeBSD General 4 17th November 2008 07:44 PM


All times are GMT. The time now is 09:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick