DaemonForums  

Go Back   DaemonForums > Miscellaneous > General software and network

General software and network General OS-independent software and network questions, X11, MTA, routing, etc.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 28th July 2008
Snoop1990 Snoop1990 is offline
Port Guard
 
Join Date: Jun 2008
Posts: 20
Thanked 0 Times in 0 Posts
Default httpd.conf

Hey I messed it up it was working and then I changed several things and now I can not access. I get Forbidden (403) Error all the time.

Here is my configuration
Code:
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/foo_log"
# with ServerRoot set to "/usr/local" will be interpreted by the
# server as "/usr/local//var/log/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/local"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module libexec/apache22/mod_authn_file.so
LoadModule authn_dbm_module libexec/apache22/mod_authn_dbm.so
LoadModule authn_anon_module libexec/apache22/mod_authn_anon.so
LoadModule authn_default_module libexec/apache22/mod_authn_default.so
LoadModule authn_alias_module libexec/apache22/mod_authn_alias.so
LoadModule authz_host_module libexec/apache22/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache22/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache22/mod_authz_user.so
LoadModule authz_dbm_module libexec/apache22/mod_authz_dbm.so
LoadModule authz_owner_module libexec/apache22/mod_authz_owner.so
LoadModule authz_default_module libexec/apache22/mod_authz_default.so
LoadModule auth_basic_module libexec/apache22/mod_auth_basic.so
LoadModule auth_digest_module libexec/apache22/mod_auth_digest.so
LoadModule file_cache_module libexec/apache22/mod_file_cache.so
LoadModule cache_module libexec/apache22/mod_cache.so
LoadModule disk_cache_module libexec/apache22/mod_disk_cache.so
LoadModule dumpio_module libexec/apache22/mod_dumpio.so
LoadModule include_module libexec/apache22/mod_include.so
LoadModule filter_module libexec/apache22/mod_filter.so
LoadModule charset_lite_module libexec/apache22/mod_charset_lite.so
LoadModule deflate_module libexec/apache22/mod_deflate.so
LoadModule log_config_module libexec/apache22/mod_log_config.so
LoadModule logio_module libexec/apache22/mod_logio.so
LoadModule env_module libexec/apache22/mod_env.so
LoadModule mime_magic_module libexec/apache22/mod_mime_magic.so
LoadModule cern_meta_module libexec/apache22/mod_cern_meta.so
LoadModule expires_module libexec/apache22/mod_expires.so
LoadModule headers_module libexec/apache22/mod_headers.so
LoadModule usertrack_module libexec/apache22/mod_usertrack.so
LoadModule unique_id_module libexec/apache22/mod_unique_id.so
LoadModule setenvif_module libexec/apache22/mod_setenvif.so
LoadModule version_module libexec/apache22/mod_version.so
LoadModule ssl_module libexec/apache22/mod_ssl.so
LoadModule mime_module libexec/apache22/mod_mime.so
LoadModule dav_module libexec/apache22/mod_dav.so
LoadModule status_module libexec/apache22/mod_status.so
LoadModule autoindex_module libexec/apache22/mod_autoindex.so
LoadModule asis_module libexec/apache22/mod_asis.so
LoadModule info_module libexec/apache22/mod_info.so
LoadModule cgi_module libexec/apache22/mod_cgi.so
LoadModule dav_fs_module libexec/apache22/mod_dav_fs.so
LoadModule vhost_alias_module libexec/apache22/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache22/mod_negotiation.so
LoadModule dir_module libexec/apache22/mod_dir.so
LoadModule imagemap_module libexec/apache22/mod_imagemap.so
LoadModule actions_module libexec/apache22/mod_actions.so
LoadModule speling_module libexec/apache22/mod_speling.so
LoadModule userdir_module libexec/apache22/mod_userdir.so
LoadModule alias_module libexec/apache22/mod_alias.so
LoadModule rewrite_module libexec/apache22/mod_rewrite.so
LoadModule fcgid_module libexec/apache22/mod_fcgid.so

<IfModule mod_fcgid.c>
    AddHandler fcgid-script .fcgi
</IfModule>

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User www
Group www

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin snoop1990@gmx.net

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/home/web/public_html"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    AllowOverride None
	Options FollowSymLinks
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/home/web/public_html">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks
    SetHandler fcgid-script
    Options ExecCGI
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/httpd-error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "/var/log/httpd-access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "/var/log/httpd-access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/www/apache22/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock /var/run/cgisock
</IfModule>

#
# "/usr/local/www/apache22/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/home/web/public_html">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig etc/apache22/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile etc/apache22/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the etc/apache22/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include etc/apache22/extra/httpd-mpm.conf

# Multi-language error messages
#Include etc/apache22/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include etc/apache22/extra/httpd-autoindex.conf

# Language settings
#Include etc/apache22/extra/httpd-languages.conf

# User home directories
#Include etc/apache22/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include etc/apache22/extra/httpd-info.conf

# Virtual hosts
#Include etc/apache22/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include etc/apache22/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include etc/apache22/extra/httpd-dav.conf

# Various default settings
#Include etc/apache22/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include etc/apache22/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Include etc/apache22/Includes/*.conf
__________________
Regards Snoop1990
Snoop1990.co.cc
( the geeky inside of an usual boy )
my own small forum:pro-connect.co.cc
Reply With Quote
  #2   (View Single Post)  
Old 28th July 2008
hunteronline hunteronline is offline
Fdisk Soldier
 
Join Date: Jul 2008
Posts: 52
Thanked 6 Times in 5 Posts
Default

This site is working: http://pulsartest.game-host.org:88

and so does this one: http://78.142.42.42/

What site is giving you the 403?
Reply With Quote
  #3   (View Single Post)  
Old 28th July 2008
Snoop1990 Snoop1990 is offline
Port Guard
 
Join Date: Jun 2008
Posts: 20
Thanked 0 Times in 0 Posts
Default

you tested my configuration ?
__________________
Regards Snoop1990
Snoop1990.co.cc
( the geeky inside of an usual boy )
my own small forum:pro-connect.co.cc
Reply With Quote
  #4   (View Single Post)  
Old 28th July 2008
ijk ijk is offline
Fdisk Soldier
 
Join Date: Jun 2008
Posts: 47
Thanked 0 Times in 0 Posts
Default

I donot know how the previous chap got your website details. Nothing in the httpd.conf to tell us your sites.

change
Code:
SetHandler fcgid-script
to on 198
Code:
AddHandler fcgid-script .php
__________________
Freebsd 7 64 bit apache2.2 php5 mysql5
Reply With Quote
  #5   (View Single Post)  
Old 28th July 2008
Snoop1990 Snoop1990 is offline
Port Guard
 
Join Date: Jun 2008
Posts: 20
Thanked 0 Times in 0 Posts
Default

it is not my website after all I am doing this for a small personal project, nothing available to the public (for the moment).
__________________
Regards Snoop1990
Snoop1990.co.cc
( the geeky inside of an usual boy )
my own small forum:pro-connect.co.cc
Reply With Quote
  #6   (View Single Post)  
Old 29th July 2008
ijk ijk is offline
Fdisk Soldier
 
Join Date: Jun 2008
Posts: 47
Thanked 0 Times in 0 Posts
Default

Did what I suggest work
__________________
Freebsd 7 64 bit apache2.2 php5 mysql5
Reply With Quote
Reply

Tags
error 403, httpd.conf

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
httpd problem or something else c0mrade Other BSD and UNIX/UNIX-like 6 15th January 2009 09:19 PM
Update httpd.conf IPs from DNS zones. bigb89 Programming 16 2nd December 2008 02:02 AM
Apache : httpd could not be started lalebarde General software and network 13 13th November 2008 11:51 PM
difference between rc.conf and loader.conf disappearedng FreeBSD General 5 3rd September 2008 05:54 AM
httpd -DNOHTTPACCEPT starbuck FreeBSD General 9 23rd August 2008 12:14 PM


All times are GMT. The time now is 12:36 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick