DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD General

NetBSD General Other questions regarding NetBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
Old 19th October 2011
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 717
Default

I recently got a lowish-end laptop, the HP 2000-240CA.

It has an AMD E-350 processor, which is designed for low power consumption. It does seem to run pretty cool. It doesn't have a numeric keypad.

Below I'm attaching dmesgs for NetBSD amd64 current, and also for Linux 2.6.38.7 x86_64.

I will post an OpenBSD dmesg in the OpenBSD Laptop Thread.

Some items of note that are not (yet) supported by NetBSD are:

* Radeon HD 6310 graphics (but VESA driver is fine)

* Realtek card reader

* Realtek RTL8188CE wireless
Attached Files
File Type: gz dmesg-NetBSD.gz (3.4 KB, 51 views)
File Type: gz dmesg-Linux.gz (14.2 KB, 37 views)

Last edited by IdOp; 19th October 2011 at 06:09 PM.
Reply With Quote
Old 9th December 2011
nickbeee nickbeee is offline
Real Name: Nick B.
New User
 
Join Date: Dec 2011
Location: Nottingham/UK
Posts: 1
Default Toshiba Portege 3110CT

NetBSD 5.1 - had to compile a custom kernel due to limited memory. No X11 as I'm running this as an IPv6 tunnel router.

Interface re0 is an additional cardbus gigabit ethernet card.

Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (PORTEGE_G1) #0: Sat Nov  5 20:19:50 GMT 2011
	root@NetBSD-VM1.NoWindows:/usr/src/sys/arch/i386/compile/PORTEGE_G1
total memory = 65020 KB
avail memory = 57660 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
TOSHIBA P3110CT/6.4 (Version 1.0)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 299MHz, id 0x66a
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId , AslId 
LNKA: ACPI: Found matching pin for 0.11.INTA at func 0: 255
LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.4.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 3
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKD: ACPI: Found matching pin for 0.12.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
attimer1 at acpi0 (PIT, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
sysbeep0 at pcppi1
npx0 at acpi0 (NDP, PNP0C04): io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
FDD (PNP0700) at acpi0 not configured
COM (PNP0501) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: (null), Li-ION  , XM2020P02    1000020420
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
VALD (TOS6200) at acpi0 not configured
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 96.0C active cooling level 1: 96.0C critical 97.0C passive 29.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7194 (rev. 0x01)
vga1 at pci0 dev 4 function 0: vendor 0x1023 product 0x9525 (rev. 0x49)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x7198 (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 0 not configured
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82440MX IDE controller (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x719a (rev. 0x00)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: vendor 0x8086 product 0x719b (rev. 0x00)
piixpm0: interrupting at SMIpiixpm0: polling
iic0 at piixpm0: I2C bus
oboe0 at pci0 dev 9 function 0: Toshiba Fast Infrared Type O, revision 0
oboe0: interrupting at irq 11
irframe0 at oboe0: SIR, MIR, FIR
cbb0 at pci0 dev 11 function 0: vendor 0x1179 product 0x0617 (rev. 0x20)
esm0 at pci0 dev 12 function 0: vendor 0x125d product 0x1978 (rev. 0x10)
esm0: interrupting at irq 11
esm0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esm0: full duplex, playback, capture, mmap, independent
vendor 0x11c1 product 0x0441 (miscellaneous communications, revision 0x01) at pci0 dev 13 function 0 not configured
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 20
pcmcia0 at cardslot0
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
re0 at cardbus0 function 0: Realtek 10/100/1000baseT
re0: Ethernet address 00:10:60:13:a2:a2
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wd0 at atabus0 drive 0: 
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Reply With Quote
Old 4th February 2012
thirdm thirdm is offline
Spam Deminer
 
Join Date: May 2009
Posts: 231
Default

This is some kind of unbranded Asus laptop I bought from my roommate. Had trouble installing the OS I usually use (OpenBSD) and NetBSD seemed happier with it than the other ones I tried (FreeBSD and Debian). The wireless seems to more or less work (iirc I installed over the wireless card, which wasn't possible in FreeBSD or Debian), but I've been using a wire because it seemed a little flaky (don't remember off hand why). I see some errors in my logs I don't understand and haven't investigated yet because I'm using the machine only minimally: "Feb 4 14:31:27 felix dhclient: send_packet: Input/output error"

I wonder what's in this machine that's made it so problematic. Someday I'll try to look into why OpenBSD choked on it.

Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010
	builds@b6.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 1527 MB
avail memory = 1464 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xfcd90 (44 entries)
ASUSTeK Computer Inc.         Z35FM                (1.0       )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1995MHz, id 0x6f6
cpu0: Enhanced SpeedStep (1340 mV) 2000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1833 1667 1500 1333 1167 1000
cpu1 at mainbus0 apid 1: Intel 686-class, 1995MHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <A.M.I.,OEMRSDT ,09000714>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ATKD (ATK0100) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A06) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: ASUSTEK, LIon,   
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpitz0 at acpi0 (THRM): active cooling level 0: 60.0C critical 105.0C passive 34.0C
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16
azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: disabling notification events
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 4
pci2: memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4222 (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17
wpi0: MoW1, address 00:13:02:1a:b1:b4
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
fwohci0 at pci3 dev 3 function 0: vendor 0x1180 product 0x0832 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 21
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:76:07:ec
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci3 dev 3 function 1: vendor 0x1180 product 0x0822 (rev. 0x19)
sdhc0: interrupting at ioapic0 pin 20
sdmmc0 at sdhc0
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x01) at pci3 dev 3 function 2 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x0a) at pci3 dev 3 function 3 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x05) at pci3 dev 3 function 4 not configured
rtk0 at pci3 dev 4 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20
rtk0: Ethernet address 00:18:f3:cf:55:06
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1995145440 Hz quality 3000
azalia0: codec[0]: 0x10ec/0x0660 (rev. 0.1), HDA rev. 1.0
azalia0: codec[1]: 0x1057/0x3055 (rev. 7.0), HDA rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, playback, capture, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <TSSTcorpCD/DVDW TS-L632D, , AS05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <ST980825A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wpi0: Radio is disabled by hardware switch
wpi0: cannot assign link-local address
wpi0: Radio is disabled by hardware switch
wpi0: fatal firmware error
wpi0: Radio is disabled by hardware switch
wpi0: fatal firmware error
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Reply With Quote
Old 21st February 2013
bsdnotbdsm bsdnotbdsm is offline
Port Guard
 
Join Date: Jan 2013
Posts: 30
Default Lenovo Thinkpad T420

Hardware:
Lenovo Thinkpad T420
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz
RAM: 8 GB DDR3 1333MHz
HDD: Western Digital 320GB, 7200 rpm

Software:
NetBSD 6.0.1 amd64

The system is behaving quite nice.
An installation/configuration guide is available here: http://www.daemonforums.org/showthread.php?t=7675
Reply With Quote
Old 27th February 2013
shep shep is offline
Rc.conf Instructor
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 929
Default

Before I recognized that the OpenBSD bootloader was causing trouble on a very old ECS A900 desknote (Via C3 cpu and Sis video) I tried NetBSD 6.0.1-patch and had trouble with xorg. Apparently xf86-video-sis requires the sis-drm module which is not enabled in the generic kernel. The thought of pulling down the kernel source, compiling a custom kernel and then building a lightweight desktop on an 800mHz Single core cpu was overwhelming.
Reply With Quote
Old 27th February 2013
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 717
Default

Quote:
Originally Posted by shep View Post
The thought of pulling down the kernel source, compiling a custom kernel and then building a lightweight desktop on an 800mHz Single core cpu was overwhelming.
Cross-compiling on a more powerful machine could be considered.
Reply With Quote
Old 30th June 2015
Adrien2002 Adrien2002 is offline
Port Guard
 
Join Date: Jun 2015
Posts: 20
Default

I have a question about nVidia and NetBSD, if I have a nVidia card, it is IMPOSSIBLE for me to use X11 on my computer with NetBSD ?
I have a GTX 765m and I know that nouveau can work with this card but... does nouveau work on NetBSD ?
Reply With Quote
Old 30th June 2015
kamil kamil is offline
Fdisk Soldier
 
Join Date: Mar 2015
Posts: 52
Default

Quote:
Originally Posted by Adrien2002 View Post
I have a question about nVidia and NetBSD, if I have a nVidia card, it is IMPOSSIBLE for me to use X11 on my computer with NetBSD ?
I have a GTX 765m and I know that nouveau can work with this card but... does nouveau work on NetBSD ?
Taylor Campbell (@riadstradh) has been working hard on getting DRM/KMS, the kernel graphics drivers from Linux 3.15 ready. It supports many cards like the Intel, up through Haswell and many Radeons. He also imported Nouveau code, which would make recent nVidia cards work; it compiles and links, but it is very much a work in progress.

Source http://saveosx.org/NetBSD7/
Reply With Quote
Old 1st July 2015
Adrien2002 Adrien2002 is offline
Port Guard
 
Join Date: Jun 2015
Posts: 20
Default

Very interesting to hear ! I dream to be able to use it on my laptop then I can bring NetBSD everywhere with me !
Reply With Quote
Old 1st July 2015
Adrien2002 Adrien2002 is offline
Port Guard
 
Join Date: Jun 2015
Posts: 20
Default

https://fosdem.org/2015/schedule/eve...OSDEM_2015.pdf

nVidia is starting to be interested with Nouveau open-source driver, a French guy I know was working with a guy from nVidia and this guy told him that. To be confirmed
Reply With Quote
Old 1st April 2016
styr styr is offline
New User
 
Join Date: Mar 2016
Posts: 1
Default Asus Eee PC 900 and Acer Aspire One ZG5

Here goes my first post!

Hopefully people will find this useful despite the age of these platforms. Although they only have a fraction of the power of modern machines, they still can do a lot when running efficient lightweight software. NetBSD really works well on these compared to many alternatives, at least for the odd tasks that I have used them for.

I recently inherited some old-ish (but barely used) netbooks from some relatives who have since started drinking the Apple Kool-Aid.

One is an Asus Eee PC 900 preinstalled with a stripped-down custom Xandros Linux.

The other is an Acer Aspire One ZG5 preinstalled with Windows XP Home (way past EOL).

The software on both is horribly outdated, but the hardware is in great shape, upgradable, and seems more than capable for meeting my needs with modern Unix-like operating systems.

Grabbing the first three available live distributions I could find (Kali Linux, Jibbed NetBSD, FuguIta OpenBSD), I took these out for a spin. Gladly, all of them run well with solid performance and minimal bugs.

I was going to ask some questions about obscure network functionality in NetBSD, but I eventually figured it out. IMO, Jibbed NetBSD by far had the best overall network setup, where everything would "just work" right out of the box (some unusual networks had some issues with wpa_supplicant, but Jibbed/NetBSD came preinstalled with the right samples to work even in those environments, so I got it working everywhere without undue trial and error).

As a topic for the OpenBSD forum, FuguIta networking would have worked almost as well out of the box, although it forces some manual configuration and manual fetching and loading of wireless drivers, ostensibly for licensing reasons (probably because they are only available as binary blobs). Getting the wireless driver to work at all on Linux was a real PITA at first, but once that was up, it came with NetworkManager to handle the rest smoothly. That may be a good thing to bundle with later/other releases of Jibbed NetBSD if feasible.

ACPI support seemed partially working on the ZG5, but it did not work right for reboot or shutdown (I didn't try suspend). Oddly enough, for the Linux-based Eee PC 900, the modern NetBSD install supported ACPI better than the modern Linux.

Both netbooks have at least one built-in reader for card media, which work under Linux, but do not fully work under NetBSD. NetBSD detects the reader in the Eee PC 900, but it doesn't seem to detect the media. I don't recall it detecting anything in the ZG5.

Also, NetBSD has full support for the ZG5 trackpad, in case that matters to anyone. None of the other live distros had that. Full trackpad support was not available for the Eee PC 900 with anything I tried other than the native Xandros installation.

I can post some dmesg output and other specs if anyone is interested, but for now, I can report that NetBSD (at least NetBSD 7.0 from Jibbed) is alive and well on these versatile netbook platforms.

{I may eventually update the laptop thread on the OpenBSD forum here. That thread already has both machines, but the posts are old and lack some hardware support that is now present in OpenBSD at least as of 5.8.}

HTH
Reply With Quote
Old 1st April 2016
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 717
Default

Thank you for an interesting post, and welcome to daemonforums!
Reply With Quote
Old 2 Weeks Ago
aht0 aht0 is offline
Port Guard
 
Join Date: Nov 2014
Posts: 11
Default

ASUS eeePC 1225B
Modifications from default config:
- replaced wifi card with an eBay-bought Atheros AR9285
- added Sony-Ericcsson F5521gw by soldering USB/SIM-adapter to one of the USB ports on motherboard. Put it under plastic cover over RAM chips. Connected to USB ports by about 15cm wires. Simple DIY hack.
- Replaced mechanical drive with a Sandisk SSD.

Pretty weak netbook got new life.
dmesg
Quote:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 7.0.2 (GENERIC.201610210724Z)
total memory = 1773 MB
avail memory = 1704 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK Computer Inc. 1225B (1.0 )
mainbus0 (root)
ACPI: RSDP 0xf0450 000024 (v02 _ASUS_)
ACPI: XSDT 0x6eca2070 000064 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FACP 0x6ecb1280 0000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/tbfadt-664)
ACPI: DSDT 0x6eca2168 00F116 (v02 _ASUS_ Notebook 00000207 INTL 20051117)
ACPI: FACS 0x6ed0ef80 000040
ACPI: APIC 0x6ecb1378 000062 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: ECDT 0x6ecb13e0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000004)
ACPI: RTCF 0x6ecb14a8 0000E2 (v01 A1234 RTCONFIG 00000001 INTL 20051117)
ACPI: MCFG 0x6ecb1590 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
ACPI: HPET 0x6ecb15d0 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000004)
ACPI: SSDT 0x6ecb1608 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 0x6ecb1918 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 3: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0: AMD C-60 APU with Radeon(tm) HD Graphics, id 0x500f20
cpu1 at mainbus0 apid 1: AMD C-60 APU with Radeon(tm) HD Graphics, id 0x500f20
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <_ASUS_,Notebook,01072009>, AslId <AMI ,00010013>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (WEC, PNP0C09): using acpiecdt0
AMDN (PNP0C01) at acpi0 not configured
S800 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
NBRM (PNP0C02) at acpi0 not configured
ADBG (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2M, SYN1D15) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
BROD (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (CRTD, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCDD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: 20 25 30 35 40 45 50 55 65 80 100
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: 1225B LIon rechargeable battery
acpibat0: granularity: low->warn 0.572 Wh, warn->full 0.572 Wh
RMEM (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (ATKD, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0 (THRM): cpu0 cpu1
acpitz0: levels: critical 99.0 C, passive 98.0 C, passive cooling
OMSC (PNP0C02) at acpi0 not configured
acpiwmi1 at acpi0 (WMI0, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: Synaptics touchpad version 7.4
pms0: Extended W mode, Palm detect, Multi-finger Report
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x1510 (rev. 0x00)
radeon0 at pci0 dev 1 function 0: vendor 0x1002 product 0x9807 (rev. 0x00)
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
ppb0 at pci0 dev 4 function 0: vendor 0x1022 product 0x1512 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x40)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xf722ff01<PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,S ALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
iic1 at piixpm0: I2C bus
iic2 at piixpm0: I2C bus
iic3 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Realtek ALC269
hdafg1: DAC00 2ch: HP Out [Jack]
hdafg1: DAC01 2ch: Speaker [Built-In]
hdafg1: ADC02 2ch: Mic In [Jack]
hdafg1: ADC03 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ppb2 at pci0 dev 21 function 0: vendor 0x1002 product 0x43a0 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 21 function 1: vendor 0x1002 product 0x43a1 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
athn0 at pci4 dev 0 function 0athn0: Atheros AR9285
athn0: rev 2 (1T1R), ROM rev 14, address cc:af:78:4d:18:4f
athn0: interrupting at ioapic0 pin 17
athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb4 at pci0 dev 21 function 3: vendor 0x1002 product 0x43a3 (rev. 0x00)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci5 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x05)
re0: interrupting at ioapic0 pin 19
re0: Unknown revision (0x40800000)
re0: Ethernet address 10:bf:48:1e:de:8e
re0: using 256 tx descriptors
ukphy0 at re0 phy 7: OUI 0x00e04c, model 0x0008, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb5 at ohci3: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: BIOS has given up ownership
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci3
usb6 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1700 (rev. 0x43)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1701 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1702 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family14h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1704 (rev. 0x00)
pchb5 at pci0 dev 24 function 5: vendor 0x1022 product 0x1718 (rev. 0x00)
pchb6 at pci0 dev 24 function 6: vendor 0x1022 product 0x1716 (rev. 0x00)
pchb7 at pci0 dev 24 function 7: vendor 0x1022 product 0x1719 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: C2: I/O, lat 100 us, pow 0 mW
acpicpu0: P0: FFH, lat 1 us, pow 2011 mW, 1000 MHz
acpicpu0: P1: FFH, lat 1 us, pow 1596 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 124117504 cycle TSC drift observed
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
uhub6 at usb6IPsec: Initialized Security Association Processing.
: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <SanDisk SDSSDP128G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 117 GB, 244209 cyl, 16 head, 63 sec, 512 bytes/sect x 246162672 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umodem0 at uhub1 port 1 configuration 1 interface 1
umodem0: Lenovo F5521gw, rev 2.00/0.00, addr 2, iclass 2/2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub1 port 1 configuration 1 interface 3
umodem1: Lenovo F5521gw, rev 2.00/0.00, addr 2, iclass 2/2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub1 port 1 configuration 1 interface 7
umodem2: Lenovo F5521gw, rev 2.00/0.00, addr 2, iclass 10/0
umodem2: no pointer to data interface
umodem3 at uhub1 port 1 configuration 1 interface 9
umodem3: Lenovo F5521gw, rev 2.00/0.00, addr 2, iclass 2/2
umodem3: data interface 10, has CM over data, has break
umodem3: status change notification available
ucom2 at umodem3
ubt0 at uhub0 port 4
ubt0: vendor 0x0cf3 product 0x3002, rev 1.10/0.01, addr 2
uvideo0 at uhub1 port 5 configuration 1 interface 0: Azurewave USB 2.0 UVC VGA WebCam, rev 2.00/4.13, addr 3
video0 at uvideo0: Azurewave USB 2.0 UVC VGA WebCam, rev 2.00/4.13, addr 3
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
drm: initializing kernel modesetting (PALM 0x1002:0x9807 0x1043:0x103B).
drm: register mmio base: 0xfeb00000
drm: register mmio size: 262144
drm kern info: ATOM BIOS: AMD
radeon0: info: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon0: info: GTT: 1024M 0x0000000010000000 - 0x000000004FFFFFFF
drm: Detected VRAM RAM=100M, BAR=256M
drm: RAM width 32bits DDR
Zone kernel: Available graphics memory: 605418 kiB
drm: radeon: 256M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading PALM Microcode
drm: Internal thermal controller without fan control
drm: Found smc ucode version: 0x00010601
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0x0xffff800020af9c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0x0xffff800020af9c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xffff800020b42118
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm: LVDS-1
drm: HPD1
drm: DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
drm: Encoders:
drm: LCD1: INTERNAL_UNIPHY
drm: Connector 1:
drm: HDMI-A-1
drm: HPD2
drm: DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY
drm: Connector 2:
drm: VGA-1
drm: DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff800021163000, size 1024x768, depth 32, stride 5632
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
acpibat0: normal capacity on 'charge state'
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
NetBSD seems to work fine on it.

Last edited by aht0; 2 Weeks Ago at 05:35 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NetBSD laptop thread Mr-Biscuit Guides 1 10th June 2009 05:51 AM
NetBSD on a laptop: trying to make it work Mr-Biscuit NetBSD Installation and Upgrading 1 1st June 2009 01:43 AM
Laptop Repair DrJ General Hardware 4 25th August 2008 02:30 PM
laptop cw_ FreeBSD General 21 14th August 2008 02:48 AM
NetBSD + old laptop adventure anomie NetBSD General 4 27th June 2008 01:57 PM


All times are GMT. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick