DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 15th July 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default hidden 16 partition and tphdisk

After all I decided to stick to OpenBSD.
During install I created a hidden partition for suspend to disk. My installed memory is 4096M, so I did in fdisk a partition of 5120M (5G) which I thought would be far enough.
First problem: after formatting it according to the tphdisk short "howto", using df -h it shows as 4G and not 5G of size, but the thing I understand less is it says it has 1.4G used, that is 35%.
What's using this space? I need to make a file big enough for suspend, and now there's no space left.
I hope I don't need to reformat everything and calculate a 35% of space lost in this partition. Do I?
Reply With Quote
  #2   (View Single Post)  
Old 15th July 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,888
Thanked 214 Times in 189 Posts
Default

As usual, gosha, you have neglected to provide information needed for anyone help you. Let's start with the obvious, basic questions, first:
  1. Does this machine have a Phoenix BIOS? That's an apparent requirement, and from the one dmesg you've posted, it doesn't:
    Code:
    bios0 at mainbus0: AT/286+ BIOS, date 05/18/09, BIOS32 rev. 0 @ 0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
    bios0: vendor LENOVO version "6DET53WW (3.03 )" date 05/18/2009
    bios0: LENOVO 7457AC1
  2. What particular "howto" that you found somewhere on the Internet are you actually trying to follow?
  3. Did you follow it blindly, or did you make adjustments for your OS and environment?
  4. If you made adjustments, what alteration did you make?
It is time you read http://www.daemonforums.org/showthread.php?t=596 -- if you've read it once before, please re-read it, paying attention to sections a, b, and c.
Reply With Quote
  #3   (View Single Post)  
Old 16th July 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

Quote:
As usual, gosha, you have neglected to provide information needed for anyone help you.
Sorry, my apologies to all, I admit have been a bit abusive this days, but not on purpose. It won't happen again in the future.

Bios and suspend issues are very new and quite difficult to understand for me, although I had a look on some explanations (for example on Wikipedia) I still find all very confusing.
As you make me note, my Thinkpad x200 does not seem to have a Phoenix bios, so all I did I guess is useless.
Does it mean my hidden partition is also useless? How does suspend to disk actually work? Will it suspend to a system file? How do I find out? I did have look for information, but could not find anything better than "apm works out of the box" "fn+f4 works out of the box", which does not for me. also, on this site you have some installation guides, but all linux related:
http://www.thinkwiki.org/wiki/Instal..._ThinkPad_X200

I had followed this "howto" http://www.teuton.org/~ejm/t42p/index.shtml
probably foolishly since it is about another model.
And followed the instruction of the thpdisk.
But now I guess this is all useless.

Now, maybe I should open another thread for this, please tell me if I should.

Here is what I would like to work:
fn+f4 to suspend to ram
fn+f12 to suspend to disk

How does suspend to disk work exactly? I mean, does suspend to disk always need a hidden partition or will it work on system files? How do I find out?
If suspend to disk is not working at all I would be fine with having only suspend to ram, but pressing fn+f4 does nothing, and typing
Code:
zzz
or
Code:
zzz -S
will give me this message
Code:
Suspending system
but then nothing would happen, the console goes back to "$" or '#" and that's it.
I enabled apm at boot time with
Code:
ampd_flags=" -C"
and it seems to work fine, because if I tipe "apm" I get
Code:
Performance adjustment mode: cool running (1600 Mhz)
Here is my complete dmesg again:
Code:
OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz ("GenuineIntel" 686-class) 2.27 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem  = 3176427520 (3029MB)
avail mem = 3077128192 (2934MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/18/09, BIOS32 rev. 0 @ 0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET53WW (3.03 )" date 05/18/2009
bios0: LENOVO 7457AC1
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz ("GenuineIntel" 686-class) 2.27 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4646" serial  4612 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617482106004821
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 19200 MHz (1228 mV): speeds: 19200, 1600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 20 (irq 11), address 00:1f:16:1f:da:e3
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 17 (irq 11)
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21 (irq 11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100AGN" rev 0x00: apic 1 int 17 (irq 11), MIMO 1T2R, MoW, address 00:22:fa:f5:62:fa
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23 (irq 11)
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 16 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250827AS, 3.CM> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x480c" rev 2.00/31.34 addr 2
video0 at uvideo0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
syncing disks... done
rebooting...
OpenBSD 4.5 (GENERIC.MP) #108: Sat Feb 28 14:58:58 MST 2009
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz ("GenuineIntel" 686-class) 2.27 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem  = 3176427520 (3029MB)
avail mem = 3077128192 (2934MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/18/09, BIOS32 rev. 0 @ 0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "6DET53WW (3.03 )" date 05/18/2009
bios0: LENOVO 7457AC1
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz ("GenuineIntel" 686-class) 2.27 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4646" serial  4612 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617482106004821
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 19200 MHz (1228 mV): speeds: 19200, 1600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 20 (irq 11), address 00:1f:16:1f:da:e3
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 17 (irq 11)
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21 (irq 11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100AGN" rev 0x00: apic 1 int 17 (irq 11), MIMO 1T2R, MoW, address 00:22:fa:f5:62:fa
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23 (irq 11)
pci3 at ppb2 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 13
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 16 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250827AS, 3.CM> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x480c" rev 2.00/31.34 addr 2
video0 at uvideo0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Thanks again for being so patient.
Reply With Quote
  #4   (View Single Post)  
Old 16th July 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

I had an answer from misc@openbsd.org and it appears that suspend is not supported, but that a couple of devs are working on it
Let's hope for 4.6
Reply With Quote
  #5   (View Single Post)  
Old 16th July 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,888
Thanked 214 Times in 189 Posts
Default

4.6? No. -current is already beyond 4.6.

Your hardware is apparently ACPI-only. (APM does not appear within your dmesg.)
OpenBSD will use either ACPI or APM if both exist on the hardware. The unused feature will appear in the dmesg as "not configured". An admin can disable ACPI or APM to force the use of one or the other if both are on the hardware.
ACPI development has been ongoing and active for years in OpenBSD. But it is not to the point where suspend/resume or suspend-to-disk is operative. No matter which hardware feature is available, the user interface on the OS is apm(8) and apmd(8).

The "howto" you referenced does not have specific instructions for your hardware model, nor for the release of the OS you're using.

The tphdisk "instructions" that are produced by running the program give an example of configuring a FAT16 partition for use with the program. You appeared, in your first post, to have difficulty with this, due to the size of your partition. FAT16 is limited to 2GB. It is important to try to understand what the implications are of using a command that you see in instructions, or in a "howto". Blindy typing and hoping do not serve a responsible administrator well.
Reply With Quote
  #6   (View Single Post)  
Old 16th July 2009
gosha gosha is offline
Spam Deminer
 
Join Date: Jun 2008
Location: China
Posts: 256
Thanked 0 Times in 0 Posts
Default

Quote:
The tphdisk "instructions" that are produced by running the program give an example of configuring a FAT16 partition for use with the program. You appeared, in your first post, to have difficulty with this, due to the size of your partition. FAT16 is limited to 2GB. It is important to try to understand what the implications are of using a command that you see in instructions, or in a "howto". Blindy typing and hoping do not serve a responsible administrator well.
I agree it's been very stupid.

After all this, I'm asking myself: is suspend/resume that important? Maybe to carry around a laptop it's still better to switch it off.
I'll have to learn how to tell ion to start which apps in which workspace in which window, so that it will be similar to a resume.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I think I just mangled my partition table Mantazz FreeBSD Installation and Upgrading 2 2nd July 2009 09:55 PM
Cannot activate partition in XP. bsdnewbie999 OpenBSD Installation and Upgrading 6 4th May 2009 05:21 PM
Negative partition size? giga FreeBSD General 1 2nd January 2009 09:02 PM
swap partition lumiwa FreeBSD General 6 11th September 2008 03:57 PM
/etc on a separate partition DarkEnergy FreeBSD Installation and Upgrading 13 20th May 2008 04:24 AM


All times are GMT. The time now is 07:36 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick